Cannon Fenske Routine, CFRU (Uncalibrated) & CFRC (Calibrated) Viscometers For measurement of kinematic viscosity of transparent Newtonian liquids, particularly petroleum products or lubricants Meets ASTM D 445 and ISO 3104 requirements Specifications conform to ASTM D 446 and…

Often referred to as Fungilab's "original viscometer," the Viscolead ONE Series is a durable, budget-friendly instrument capable of precise and accurate measurements. Designed with a 6-button keypad and a 4-line digital display, the Viscolead ONE provides the essential features…

Made of stainless steel With two leveling screws and a level Spring-operated gate held by positive release mechanism, allowing instantaneous flow of sample Trough graduated on 0.5 cm divisions to permit precise measurement of flow Overall dimensions: 14 x 3 x 5 inches. Requires 75…

For both laboratory and field use Aluminum cup and brass orifice Calibrated cups are calibrated to within 2% accuracy Ideal for measuring low viscosity liquids Results are expressed as time in seconds for the liquid to flow through the orifice until the first break in the…

The SMART Series is a high-quality rotational viscometer that uniquely adapts to the user's individual testing needs. This unit includes a PT100 temperature sensor, Fungilab's Datalogger software, 10 working memories, and a chemical-resistant touchpad. This instrument provides optimal…

EZ=Equivalent Zahn; 3% Guaranteed tolerance; complies with and exceeds ASTM D 4212 All stainless steel cup and handle Oil used to standardize EZ Cups is produced in accordance with ISO 9002 The EZ cup formula for each cup of the series matches the applicable ASTM formula in D…

Uncalibrated and Calibrated Viscometers Measure kinematic viscosity of transparent Newtonian liquids by suspended level principle Meets ASTM D 445 and D 446 and ISO 3104 and 3105 requirements. Precision: ±0.2% Similar to Cannon-Ubbelohde but less rugged in design.…

The bubble viscometers can be ordered individually to create a custom set. Economically priced Compliant with ASTM methods D1131, D1545, D1725

Yields accurate kinematic viscosity data quickly and easily using the Alphabetical Comparison Method (upward speed of a trapped air bubble) Conforms to ASTM D 1131, D 1545 and D 1725 Standard tubes easily identified by large letters Quick and easy cleaning Viscosity of the liquid sealed in…

Quickly measures the viscosity of liquids such as paint, lacquer, varnish, syrup and oil Compact and easy to use Rapid results Inexpensive Boekel cup type viscometers measure viscosity in the 18 to 1725 centistokes range in 90 seconds or less. Five cups are available differing only in the…

ASTM D-445-446, ASTM D2515, ISO 3104-3105 and UNE 400313 Cannon-Fenske Routine Viscometers quickly and easily measure the viscosities of transparent Newtonian liquids. Sample volume: aprox. 7 ml. Precision: ±0.2%. With constant value indication at +40ºC and +100ºC. All…

The consistometer is a bench top device used for accurately checking laboratory or production samples against consistency, viscosity or flow rate standards. While using little bench space, it provides a simple, accurate method of conducting a variety of flow associated tests. It can be used in…

Automatic timing option for simplified, accurate measurement of efflux times Microprocessor controls temperature between ambient and 240°C (464°F) Four-tube capacity Dual digital displays show setpoint and actual temperature °C/°F selectable Conforms to ASTM…

These FUNGILAB glass capillary viscometers allow to determine viscosities using ASTM and DIN testing methods. All capillary viscometers are supplied with the cali- bration certificate issued in accordance with the conditions of accreditation granted by a National Metrological Register which has…

Large capacity 37L oil bath with temperature control of up to 200/270°C. Operation and functions High temperature distribution accuracy by adopting jet stirring Advanced supportive functions Standard equipped with external alarm output, temperature output terminal (4~20mA,…

Easy-to-use, digital setting, compact design oil bath. Features BO400/410 Digital temperature setting by up and down arrow keys Removable oil tank for convenient cleaning and changing of oil Heater situated outside the water tank Exclusive connection for bath…

Easy-to-use, compact design water bath. Features BM100/110/200/210 Analog set up system Thermometer is included to verify actual temperature Protected water tank prevents burns caused by contact Equipped with a drain (BM200/210) BM401/410 Digital…

Calibrated viscometers For measuring kinematic viscosity of transparent Newtonian liquids Meets ASTM D 445 and ISO 3104 Specifications conform to ASTM D 446 and ISO 3105. Precision: ±0.2%. Minimum sample volume: 7 mL in sizes A to C; 12 mL in sizes D to F ; 23 mL in sizes G and H. Requires…

Made with borosilicate glass Without stopcock Time of outflow for water at room temperature: 60 to 100 seconds Minimum sample: 5 mL

Made of polished stainless steel Looped handle and finger ring Calibrated with Cannon viscosity standards traceable to NIST; Cannon standards are produced in accordance with ISO 90002 Each cup is furnished with the mathematical formula for calculating the viscosity in centistokes…

Microprocessor controlled temperature regulation from 10 to 150°C Conforms to ASTM D 445 Built-in platinum resistance thermometer On-screen temperature monitoring RS 232 and RS 485 communication ports A keypad permits temperature selection to two decimal…

Uncalibrated and Calibrated Viscometers Suspended level viscometer for measurement of kinematic viscosity of transparent Newtonian liquids Also used for evaluating jet fuels and hydraulic fluids Meets ASTM D 445 and D 446, as well as ISO 3104 and 3105 requirements Suitable for use at…

CT-500 Temperature range 20° to 100°C Easy temperature setting Precise solid state temperature control within 0.01°C Multiple safety features The top cover contains seven round holes 51 mm (2") in diameter. Each unit maintains accurate temperature control of 0.01°C within the range of…

The Viscolead ADV Series is a budget-friendly, versatile viscometer that expands on the features of the Viscolead ONE. Offering temperature-sensing capability, Fungilab's Datalogger software, and a durable design, the Viscolead ADV is a reliable option for users seeking precise and accurate…

All Cannon viscometer holders are designed to fit holes 51 mm (2 in.) in diameter. Rubber holders are made of neoprene rubber.  Plastic holders hold the viscometer firmly with a spring clip.  Metal holders are constructed of chrome-plated machined brass.  A handle permits…

Quick and reliable automation Direct kinematic viscosity, no need to correlate data Modified cross-arm style tube, works with both transparent and opaque oils Reliable, only 2 moving parts Easy-to-use graphical touch screen Small sample volume: <0.5 mL Rapid automated analysis: <3…

BS/U Tube glass capillary viscometers are ideal for measuring the kinematic viscosity of transparent Newtonian fluids within a range of 0.9-10,000 cSt. Includes a calibration certificate with a Constant values at 40°C and 100°C and a precision of ±0.2%. Viscometers conform to ASTM D445, D446, ISO…

Contains an oxidation inhibitor which reduces tendency to darken at higher temperatures For use below 135°C (275°F) For higher temperature requirements, see Thomas number 6428R25.

Fungilab's high-quality stainless steel spindles are compatible the respective range of the user's rotational viscometer (i.e. L, R, H range). All spindles conform to the requirements of the ASTM-ISO 2555 standard. For tests performed with abrasive or highly aggressive samples, spindles…

BS/IP/RF U-Tube Reverse Flow glass capillary viscometers are ideal for the measurement of opaque liquids within a range of 0.6-300,000 cSt. Includes a calibration certificate with Constant values at 40°C and 100°C. Viscometers conform to ASTM D445, D446, ISO 3104, ISO 3105 and UNE 400313 standards.…

Benchtop precision constant temperature bath equipped with high performance controller for higher precision and wider temperature range. Performance and functions Precision controller enables temperature adjustment accuracy of ±0.01°C (at 20°C) BH501 can be used as…

Rapid measurement of asphalt emulsions, suspensions, slurries, foods, residual oils and similar materials Temperature control to 0.1°C at 25, 40, 50, 80, and 100°C Rugged and lightweight Most tests completed within 15 minutes Easy-to-use The CANNON Digital Paddle Viscometer has…