Jacketed Flask

Compare Tool

Select up to 3 products

Jacketed Flask
1 - 32 of 66
Sort
View
Show
  • Fully jacketed flask with sharply tapered walls which allows for continuous operation with smaller volumes. Jacket has hose connection inlet/outlet. Supplied with nylon bushings and fetfe o-rings.

  • …chemical applications. Improved design permits greater condensing capacity. Condenser approximately 139mm jacket length. Joint between condenser and extractor is 24/25. Flask joint is 14/20. Designed to accommodate paper thimble, size 10 x 50 mm. Flask is 30mL capacity. Hose connections are size B.

  • … Small with 50 mL flask (4406K22) Extraction chamber 29 mm i.d. x 110 mm usable depth Condenser joint Standard Taper 34/45; extraction tube top joint Standard Taper 34/45; bottom joint Standard Taper 24/40 Takes 25 x 85 mm thimble Medium with 85 mL flask (4406K46) …

  • jacketed, flat bottomed spinner flasks consist of a water jacketed spinner flask, manufactured from Type 1 Class A borosilicate glass, and a microcarrier style impeller with glass shaft that extends through the cap and PTFE paddle. Flasks are typically used with a circulating water bath. Jacket

  • Scale-Up Series™ jacketed cylindrical flasks with Easy Drain glass valves and KF flange inlet & outlets. The flask is graduated on both sides allowing for either left or right hand flask orientation. The Easy Drain valve is designed to prevent accidental removal when opening and incorporates a…

  • Round bottom, HEAVY WALL, three-neck flask with standard taper outer joints on the center and side necks. Entire body of the flask is jacketed and has two hose connections for circulation of heating or cooling liquid.

  • Similar to CG-1930, but with morton indentations to increase agitation during stirring. Supplied complete with two polypropylene hose connections and two screw caps. For clamp see CG-141 or CG-141-T. For o-ring see CG-147. Please Note: Morton Style Reactors/Flasks Not Suitable For Vacuum

  • Rugged spherical jacketed reaction flask with Duran, flat, ground flange with O-Ring groove, for use with 6517 Quick Release Clamp. Each flask is supplied with one CAPFE O-Ring (PTFE encapsulated silicone O-Ring). 12L and larger are supplied with reference graduations. Inlet/outlets available with…

  • A compact fractionation unit for distilling small quantities in a vacuum, and for ordinary separation. Column is vacuum jacketed. Indents are positioned to cause the vapor to follow a spiral path, adding to the efficiency of the unit. Approximately three theoretical plates at 60mL/hr. Hold up to…

  • Jacketed Kuderna-Danish concentrator tubes circulate hot water through the jacket to boil the solvent dry during extraction/concentration. The bottom portion of the tube is never heated, so samples won't boil dry. The concentration automatically stops when the solvent sinks below the jacket. Tubes…

  • Spherical, jacketed reaction flask with 100mm (4") flat flange top. Jacket inlet/outlets available with either tangentially sealed 28/15 o-ring ball joints or with Ace-Thred connections. Use 6496-10 clamp to secure head to flask.

  • European style flask with tapered walls and a shallow hemispherical bottom for more efficient mechanical or magnetic stirring. Entire body of the flask is jacketed and has two hose connections for circulation of heating or cooling liquid. With standard taper outer joints on center and side necks.

  • …standard distillations, evaporating flask feed via stop-cock. Includes 1L P+G receiving flask, receiving flask clip, stopcock, PTFE fill tubes, and set of GL-14 hose connections and caps. 1230E21 - Type BY Vertical condenser with additional double jacket for cooling. Additional joint on the…

  • The Double-Sidearm Celstir with water jacket allows precise temperature control of its contents when operated with a recirculating water bath. The hose connectors accept 1/4 in (6.35 mm) ID tubing. This unit is made from Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and…

  • Complete, one-piece, jacketed flask, pressure reactor system designed to perform low to moderate positive pressure reactions, synthesis and catalysis. Reactor capacities range from 500ml to 5000ml and use Ace-Threds to achieve a leak-tight system. One-piece design features a 25mm center opening and…

  • These jacketed, cylindrical borosilicate glass reaction vessels have four indentations for improved stirring. They are without constriction at the top and have a flat bottom. They feature sturdy walls and a tooled flat flange with a surface ground to assure a tight seal. Jacket has 1/2" hose…

  • Round bottom, HEAVY WALL, three-neck flask with standard taper outer joints on the center neck and vertical side necks. Lower half of the flask is jacketed with two hose connections for circulation of heating or cooling liquid.

  • Cylindrical jackted reaction flask with a 4" (10.2cm), top opening. Jacket inlet/outlets are available with tangentially sealed with 28/15 O-Ring ball joint connections, or with #11 Ace-Threds, for use with 3/8in tubing.

  • Round bottom, HEAVY WALL, three-neck flask with standard taper outer joints on the center neck and vertical side necks. Lower half of the flask is jacketed with two hose connections for circulation of heating or cooling liquid. Lower outlet is a CG-424-05, 4mm PTFE straight bore stopcock.

  • Rugged cylindrical jacketed reaction flask with Duran, flat, ground flange and o-ring groove. Various bottom outlet options are available (see details below). For use with 6517 quick release clamp. Jacket inlet/outlets are available with either tangentially sealed o-ring ball joints or with…

  • …outer joints on the center and side necks. Entire body of the flask is jacketed and has two hose connections for circulation of heating or cooling liquid. Indentations increase agitation of the contents of the flask during stirring. MORTON STYLE REACTORS AND FLASKS ARE NOT SUITABLE FOR VACUUM.

  • New design jacketed receiving flask. Fits all rotary evaporators. Outer jacket has 28/15 o-ring ball joints to seal to chiller hoses. Has an SVL thread vent cap on side joint. Bottom DN25 ball joint has CAPFE o-ring. Jacket inlet and outlet ball joints have FETFE o-rings.

  • These jacketed, cylindrical borosilicate glass reaction vessels are without constriction at the top and have a flat bottom. They feature sturdy walls and a tooled flat flange with a surface ground to assure a tight seal. There is a gently sloping contour at junction of side wall and bottom, thus…

  • These borosilicate glass reaction vessels are jacketed with 1/2" hose connectors. They have four indentations for improved stirring and a tooled flat flange with an O-ring groove for a greaseless seal.

  • …cylindrical reaction flask with Duran, flat, ground flange and o-ring groove, with water/steam jacket. Jacket inlet/outlets are available with either 35/25 o-ring ball joints (sealed tangentially) or with Ace-Thred connections. For use with 6517 quick release clamp. Flask supplied with one CAPFE…

  • Jacketed version of standard 9448 Flask. Furnished with polished 45/50 outer joint so that it can be used with 9443-20 or 9446 Heads with PTFE-Clad joint which does not require lubricant and does not freeze under high temperature, vacuum operation.

  • 1L or 2L jacketed general purpose bench top reactor system supplied complete with everything necessary for operation. The system is designed so that all wetted surfaces are glass and PTFE for maximum chemical compatibility. A small overall stand footprint and flexible drive shaft combination allow…

  • Jacketed reaction flask with round bottom. Flat flange is grooved for using an o-ring (instead of a flat gasket) to seal to a head. Jacketed for temperature control of ingredients. Supplied with CAPFE o-ring. Codes -01 thru -04 have 28/15 o-ring ball joints on inlet/outlet. Codes -301 thru -304 have…

  • Round bottom flask with three in-line necks. Fabricated with heavy walls, approximately 30% heavier than regular wall flasks. Jacket inlet/outlets are available with either tangentially sealed 28/15 o-ring ball joints or with #11 Ace-Thred connections

  • The Ai heavy wall short path distillation head with vacuum jacket. Features Heavy wall for durability Boiling flask and distribution ports Vacuum jacketed Five sets of vigreux Thermo probe port: 14/20 joints Recirculating fluid ports: GL-16 adapters Glass material:…

  • Complete, two-piece, jacketed flask, pressure reactor system designed to perform low to moderate positive pressure reactions, synthesis and catalysis. Reactor capacities range from 500ml to 5000ml and use Ace-Threds to achieve a leak-tight system. Two-piece (flanged flask and head) design allows the…

  • Similar to 9843-04 Vessel except jacketed to provide active cooling from tap water or mechanical cooler. Jacket is cylindrical with flat bottom for greater stability. With #25 Ace-Thred center neck and two 14/20 side necks. Code -27 includes our 7506-10 #25 Ace-Thred bushing used to secure a 9852-41…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.