Humidifier

Compare Tool

Select up to 3 products

Humidifier
1 - 24 of 24
Sort
View
Show
  • Helping to prevent salt build-up inside the sample introduction system, the Argon Humidifier allows uninterrupted and maintenance-free operation. The Argon Humidifier combines ease of operation, high performance and safety. For use with Optima 2x00/4x00/5x00/7x00/8x00.

  • …holds up to 15 long guns Programmable operating system for precise parameters and repeatable programs Fuming to 424° F with built-in humidifier and LCD display The CApture™ BT is a spacious benchtop Cyanoacrylate (CA) evidence fuming chamber with a durable, easy-to-clean…

  • …6i pump can achieve 50 mTorr in <25 minutes for twelve 6-L canisters; higher power 10i option also available Custom-built trays for different canister sizes Humidifier provides humidified sweep gas to improve cleaning process One-year limited warranty Fully assembled and ready to use

  • For 9195R10 series plant tissue culture tubes Autoclavable caps available in natural or orange color. Two positions: closed, for humidified environments; and open, for gas exchange. Drip ring minimizes contamination. Flexible interval ribs hold cap firmly in place.

  • Gas line connector kit includes: (Quantity: 1) pergo main unit (heater); (Quantity:1) PFA water reservoir with min/max lines and four ported caps; (Quantity:1) pergo spare power supply, 12V, 1.5A, wall mount with plugs for North America, Europe, UK; (Quantity: 4) 2.4mm i.d. x 4mm o.d. PTFE gas line…

  • When cleaning SilcoCan or TO-Can canisters, it is important to use humidified air or nitrogen to help remove volatile organic contaminants. Restek's humidification chamber is made of acrylic and withstands pressure up to 90 psi. The 1/4-inch inlet and outlet compression fittings allow easy…

  • …bottoms are of uniform thickness. The tubes are rimless for greater convenience in plugging and rack storage. Optional polypropylene two position closures (Thomas Nos. 9195R55 or 9195R50) can be opened for gas exchange or closed for humidified environment. Internal drip ring minimizes contamination.

  • …tubulations are 8mm O.D A 29/42 Standard Taper stopper is used to seal the top to the base These bottles are a very effective way to humidify carbon dioxide-air mixtures for maintaining high humidity in gassed cell culture incubators. The gas enters the bottle through the top of the…

  • …extra strength. A 24/40 Standard Taper stopper is used to seal the outlet tube to the base. These bottles are a very effective way to humidify carbon dioxide-air mixtures for maintaining high humidity in gassed cell culture incubators The large diameter fritted disc permits the handling…

  • …ergonomic viewing and setting Foot pedal release with easy opening lid – provides hands free operation RS-232 port for data logging Built-in water reservoir humidifies chamber to reduce sample evaporation, while also protecting unit from spills and including a drain for easy cleaning

  • …intervals Large viewing window and internal light provide easy viewing of samples without the need to open the door Built-in water reservoir humidifies chamber to reduce sample evaporation, while also protecting unit from spills and including a drain for easy cleaning Versatile accessory…

  • …mechanism — provides easy and effortless access to flasks located in the front and back of the incubator shaker Built-in water reservoir humidifies chamber to reduce sample evaporation, while also protecting unit from spills, and includes a drain for easy cleaning Pull-out service module…

  • …Sidearm tubulations are 8mm O.D. A 40/50 Standard Taper stopper is used to seal the top to the base. These bottles are a very effective way to humidify carbon dioxide-air mixtures for maintaining high humidity in gassed cell culture incubators. The gas enters the bottle through the top of the…

  • …dilutions in duplicate to 35 mm petri dishes. 3. Add 100 muL of 5% FCS in isotonic saline to two control slides. 4. Incubate at 37C in fully humidified atmosphere of 10% CO2 in air for 7 days. 5. Score the number of colonies that show differentiation (note: 50 units is defined as the amount of…

  • FD Apop™ Kit

    FD NeuroTechnologies

    …Reagent, 6mL  10x Phosphate-Buffered Saline, 250mL x 2 Materials required but not included: Double distilled water Humidified chamber Incubator or waterbath (30°C) Histological supplies and equipment, including microscope slides, glass coverslips, staining jars,…

  • …intervals Large viewing window and internal light provide easy viewing of samples without the need to open the door Built-in water reservoir humidifies chamber to reduce sample evaporation, while also protecting unit from spills and including a drain for easy cleaning Versatile accessory…

  • …dilutions in duplicate to 35 mm petri dishes. 3. Add 100 muL of 5% FCS in isotonic saline to two control slides. 4. Incubate at 37C in fully humidified atmosphere of 10% CO2 in air for 7 days. 5. Score the number of colonies that show differentiation (note: 50 units is defined as the amount of…

  • FD NeuroApop™ Kit

    FD NeuroTechnologies

    …Reagent, 5mL  10x Phosphate-Buffered Saline, 250mL x 2 Materials required but not included: Double distilled water Humidified chamber Incubator or waterbath (30°C) Histological supplies and equipment, including microscope slides, glass coverslips, staining…

  • …culture grade, 96 wells, flat bottom) in a final volume of 100 μl culture medium per well, according to the media needs of the cells in a humidified atmosphere ( e.g., 37 °C, 6.5% CO2). The incubation period of the cell cultures depends on the particular experimental approach…

  • ES-R1 from mouse,

    MilliporeSigma

    …feeder flask is washed once with PBS and KSR medium added. ES cells should be plated at 4-5 x 104 cells/cm2. Cultures must be incubated in a humidified 5% CO2/95% air incubator at 37 C. A 100% media change must be performed every day and cells passaged every 2-3 days. Colonies must not be allowed…

  • Corning insectagro Sf9 is formulated to support the propagation of Sf9 insect cells in culture, and can also be used for SF21 cells. The Sf9 cell line originated at the USDA Insect Pathology Laboratory from IPLBSF-21 cell line, derived from the pupal ovarian tissue of the fall army worm. Sf9 cells…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.