Glass Frit Filters

…use in fabrication of special glass apparatus. Available in F, M, C and XC porosities. Pressure Limits: Fritted glassware is designed for low pressure vacuum filtration or gas flow. The MAX differential pressure should not exceed 15 PSI. Thermal Limits: Fritted glassware should not be exposed…

…filter paper Offered in nine sizes and three porosities Pore sizes 40 to 60 µm = C, 10 to 15 µm = M and 4 to 6 µm = F With square-cut, fire-polished rim These funnels are especially useful where filter paper would be attacked by the material being filtered. The…

Filter discs, available in glass fiber or granular type. Glass fiber filter discs last longer, are more abrasion resistant, and are superior in performance than granular type discs. Granular discs for analytical and general bacteria filtration are avai

Kimble 28400 With fused-in fritted discs Designed from Federal Specification DD-F-776 Dimensions are identical with corresponding sizes of 5220F28 series. Type designates capacity (in mL) and porosity.

Filter Funnel with Fritted Disc with 2mm glass stopcocks. Joint Size: 14/20 or 24/40, Frit O.D: 30mm, Porosity: Coarse or Medium, Capacity: 60mL.

…with fritted glass support is designed for large volume filtration analysis of corrosive liquids or samples with high particulate loads that would tend to clog a 47 mm diameter filter. This unit is also recommended for filtering large volumes of HPLC solvents. The ground glass connection…

Schlenk filter tube with an integral glass filter disc at the tube's mid-line and featuring inner joints at top and bottom.

Filter Tube, Fritted, Glass Stopcocks, Synthware, Inner Joints: 14/20 or 24/40, Frit OD: Sizes available ranging from 30-36mm, Frit Porosity: Coarse or Medium, Stopcock Bore: 2mm, Stopcocks have constant pressure retention device

Outside diameter of tube 8mm, total length of tube 150mm. All porosities of a given size are priced the same.

…a vacuum filter. Includes a fritted glass filter support and No. 5 perforated silicone stopper for easy attachment to a vacuum filtering flask. Membrane filters are not included. Thick prefilters or laminated filters will not seal in this holder and it is not autoclavable with membrane filters…

…sterile membrane filters. Also applicable for analysis of suspended solids in water using 47mm depth filters. Complete set includes a borosilicate glass funnel and base., anodized aluminum spring clamp, and perforated silicone stopper. Parts are available seperately. Filter Diameter: 47mm,…

For supporting funnels, Gooch crucibles, filter tubes, etc., in filtration assemblies Particularly suitable for Buchner and fritted glass funnels, porcelain filters without head pieces and for reverse flow cleaning of filter crucibles Adapters will withstand autoclaving Taper angle in all sizes…

…glass sealXX1012503 - Millipore Spring Clamp, 25 mm, AluminumXX1012502 - Millipore Glass Base and Stopper, 25 mm, Glass frit supportALIGNED25 - Millipore Alignment Guide, 25 mm, 5/PKFeatures & Benefits:. Volume graduations clearly indicate sample volume. Filter support available in fritted glass or…

Millipore Classic Glass Filter Holders - Kit47 mm, Glass frit membrane support, 500 mL funnelThe Classic Glass Filter Holder is an essential tool for every research lab. The holder's multipurpose design is appropriate for a variety of applications and is available in three different support…

Millipore All-Glass Filter Holders - Kit47 mm, Glass frit membrane support, 300 mL FunnelThe Millipore All-Glass Filter Holder was designed for the filtration of aqueous and organic or corrosive liquids for particulate contamination analysis. The holder can also be used for HPLC solvent preparation.…

Millipore All-Glass Filter Holders - Kit90 mm, Glass frit membrane support, 1L FunnelThe Millipore All-Glass Filter Holder was designed for the filtration of aqueous and organic or corrosive liquids for particulate contamination analysis. The holder can also be used for HPLC solvent preparation. The…

…Methods for the Examination of Water and Wastewater (1992) Retains precipitates such as silver chloride Compares favorably with fritted glass filter crucibles Maximum usable temperature 500°C Cytiva products are intended for sale/shipment within the US only. International…

This unique disposable filter funnel system for solid-liquid separation can be used in chemistry and biological laboratories. The system consists of a polypropylene filter funnel with diatomaceous earth/polyethylene fritted disc, a CG-1049-J style glass vacuum adapter, and a flask or vial. The…

…Bluestem glass solvent filter. Restek Bluestem glass solvent filter provides clean mobile phase to extend the life of columns and pump seals 15 µm borosilicate glass frit sits lower than conventional glass filters to draw more mobile phase from each bottle Blue filter stem allows…

Filter System, Fritted Glass, 300mL Filter System, Stainless Steel Screen, 300mL Filter System, Fritted Glass, 100mL

This unique disposable filter funnel system for solid-liquid separation can be used in chemistry and biological laboratories. The system consists of a polypropylene filter funnel with diatomaceous earth/polyethylene fritted disc, a CG-1049-J style glass vacuum adapter, and a flask or vial. The…

Millipore Classic Glass Filter Holders - Kit47 mm, Glass frit membrane support, 300 mL funnelThe Classic Glass Filter Holder is an essential tool for every research lab. The holder's multipurpose design is appropriate for a variety of applications and is available in three different support…

Fused, fritted glass disc Polished ends Pore size: coarse, 40-60 µm, medium, 10-15 µm, fine 4-5.5 µm 30 mL disc diameter: 30 mm; fits tube i.d. 36 mm, 50 mL disc diameter: 40 mm; fits tube i.d. 42 mm.

…Base and Stopper, 25 mm, Glass frit supportThese accessory products are designed to replace parts contained in Millipore glass vacuum filtration kits or provide for an alternative configuration. This item is an accessory part for the Millipore 25 mm Glass Microanalysis Filter Holder Kits.

…silicone sealing ring Glass components are manufactured from Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E 438 Type I, Class A requirements Recommended for general filtration Includes a coarse porosity (40-60 μm) fritted glass support base, 300mL…

…Base and Cap, 47 mm, Glass frit supportThese accessory products are designed to replace parts contained in Millipore glass vacuum filtration kits or provide for an alternative configuration. This item is an accessory part for the Millipore 47 mm All-Glass Filter Holders Kits and Millipore…

Filter Tube, Fritted Disc, Inner Joints, Synthware, Joints: 14/20 and 24/40 available, Frit OD: Available in sizes ranging from 20-36mm, Frit Porosity: Coarse or Medium available.

Borosilicate glass filtration apparatus accomodates 25mm membrane filters. The new design utilizes a nylon Ace-Thred adapter to join the glass funnel, filter flask and fritted disc together. This design eliminates the need for the clamping device, stopper and base. The unit is easy to assemble,…

Borosilicate glass filtration apparatus accomodates 75mm membrane filters. The new design utilizes a PTFE Ace-Thred adapter to join the glass funnel, filter flask and fritted disc together. This design eliminates the need for the clamping device, stopper and base. The unit is easy to assemble,…

…with fritted glass support is designed for large volume filtration analysis of corrosive liquids or samples with high particulate loads that would tend to clog a 47 mm diameter filter.  This unit is also recommended for filtering large volumes of HPLC solvents. The ground glass connection…

…KIMAX® funnel is used wherever filter paper and membranes cannot withstand the chemical attack of the filtrate. Funnels are constructed with heavy-walled stems, and top rims are beaded for extra strength With a marking spot With KIMFLOW® fritted disc Manufactured from 33…