Vapor Traps
These devices, including vacuum traps, glass cold traps, dry ice condensers, and steam traps, are designed to condense or absorb vapors from experiments or vacuum systems. They protect sensitive instruments and maintain a clean air environment, essential for precise scientific work.
Vapor traps are available in various designs to suit different types of vapors and laboratory setups, ensuring that labs can maintain the highest standards of safety and cleanliness
-
SYNTHWARE Large Volume Vacuum Traps
Kemtech AmericaVacuum Trap, Large Volume Capacity: 500 and 1000mL available.
-
Vacuum Traps, Threaded Body
Ace GlassConsists of Body with Ace-Thred, adjustable Inner Tube and Nylon Bushing with FETFE O-Ring. Available with optional threaded tubing adapters (-75,-78), or modified with #15 Ace-Threds on inlet/outlet for use with PTFE Ace-Safe connectors to allow safe easy tubing connect-disconnect. Simply attach…
-
Vactrap™ XL Vacuum Trap System
Foxx Life SciencesFoxx Life Sciences VactrapXL™ is the world's most advanced vacuum trap system. Ideal for protection of vacuum lines and scientists alike, VactrapXL safely contains waste from supernatural removal, chemical separation, and cell or tissue culture media aspiration. Best of all,…
-
SYNTHWARE Vacuum Traps, Spherical Joints
Kemtech AmericaVacuum Trap Kit with Spherical Joints. Includes trap body, top adapter, middle adapter, bottom adapter, and clamps. Body OD: 50mm, Body Length: 360mm
-
Inert Atmosphere System, Ace-Burlitch
Ace GlassThis system is designed for maximum convenience and versatility in the handling of air-sensitive compounds in conjunction with Ace no-air labware or suitably adapted conventional glassware. Complete instructions on assembly, leak testing and preparation of the system are included. Components can be…
-
Freezing Section, 29/42
labForce® (powered by Thomas Scientific)Prevents corrosion by acid and alkaline vapors, moisture, etc., entrained during evacuation of distilling apparatus, vacuum desiccators, etc. Freezing trap, when immersed in suitable freezing mixture, removes condensable vapors, gauge liquid or other foreign material accidentally introduced…
-
Vacuum Traps, Threaded
Ace GlassRound bottom with adjustable inner tube and Nylon bushing with FETFE O-Ring. Optional threaded adapters (8746-75 and -78) will allow safe and easy tubing connect-disconnect. Simply attach tubing to serrated end of adapter, then connect adapter via 7506 bushing to inlet and outlet of trap. Serrated…
-
SYNTHWARE Dewar Type Vacuum Traps
Kemtech AmericaVacuum Trap, Dewar Type Capacity: 250, 500, and 1000mL available Stopcock: Glass or Teflon Options available Stopcock Bore: 4mm
-
Vacuum Guage Trap
ChemglassTrap provides protection of vacuum gauges from particulates which contaminate the mercury when the gauge is vented to the atmosphere. Supplied packed with glass wool. Hose connections have a 9mm OD at the middle serration.
-
Complete Vacuum Traps
ChemglassTwo piece vacuum trap connected with an inner and outer joint to facilitate cleaning.
-
SYNTHWARE Micro Dewar Vacuum Traps
Kemtech AmericaVacuum Trap, Dewar, Micro Reservoir Capacity: 100mL Stopcock: Glass or Teflon options available 2mm Stopcock Bore
-
Bubbler Mineral Oil
DWK Life Sciences (Kimble)Used with mineral oil to observe gaseous addition to reactions. May be used to vent a reaction mixture to the atmosphere. Tubing connections are 8 mm O.D. and may be used with 179730-0808 or 179920-0808 to join multiple bubblers if necessary.
-
Self washing, rotary evaporator trap design by Dr. William Boulanger. Superior design prevents blow-through and enables continuous addition with rotary evaporators. Solvent vapor rapidly flows out while condensed solvent continuously rinses both the trap walls and the evaporator shaft returning any…
-
Dewar Type PTFE Stopcock Vacuum Traps
ChemglassDewar style trap CONDENSERS designed for large volume solvent removal. Lower reservoir has a capacity of either 500 or 1000mL, with a 4mm PTFE stopcock. Serrated hose connections are 12mm at the smallest serration and 14mm at the largest serration. Optional UHMW Lid prevents evaporation of dry…
-
Rotary Evaporator Bump Traps, Modified
ChemglassTrap provides expanded volume for reactions that have a tendency to foam excessively. The inner vapor tube is sealed to the top of the trap to prevent entry into the condenser. Traps have a 24/40 top outer joint and the listed size of lower inner joint.
-
Dry Ice Condenser / Trap, with Reservoir
Ace GlassTrap,dry ice condenser,glass hose connections,PTFE stopcock bottom.
-
Dry Ice Condenser-Trap, with Ace-Threds
Ace GlassTwin chambered dry ice condenser-trap,for Rotary Evaporator use. Squatty design 18"high, two chambers. Dry ice fingers secured in main body via #50 Ace-Thred, bushings, and O-Rings allowing for easy cleaning. Two ports at top of chamber are 3/8" O.D. (for connecting to evaporator & vacuum source).…
-
Adapter, Distilling Trap
Ace GlassDistilling trap adapter with outer joint top and inner joint bottom
-
Dry Ice Trap
Ace GlassWith a 24/40 joint at the bottom. Inside diameter of coolant section is 50mm and length is approximately 250mm. O.D. of inlet and outlet is 22mm. Available modified with #15 Ace-Thred inlet/outlet for use with Ace-Safe tubing connectors.
-
Trap is designed for large volume solvent vapor removal during rotary evaporation. Trap is placed between the vacuum source and the rotary evaporator to prevent solvent vapors from entering the vacuum pump. PLASTIC COATED to contain solvent in case of breakage and supplied complete with a…
-
Adapter Vacuum ST 24/40
DWK Life Sciences (Kimble)Vertical adapter with vacuum take-off and drip tip.
-
Vactrap™ G
Foxx Life SciencesFoxx Life Sciences’ Vactrap™ G (Glass) is the ultimate vacuum trap system, adhering to the strictest CDC recommendations for laboratory safety. With its new continuous full vacuum rating, it is ideal for protecting vacuum lines and users. Vactrap™ G safely contains waste produced during supernatant…
-
Vacuum Trap Com Size 21
DWK Life Sciences (Kimble)Outlets are 180º apart for easy installation into a variety of vacuum systems. Protects the mechanical pump from attack by corrosive vapors which can be condensed by using liquid nitrogen or dry ice/slurry mixtures. Two-piece construction allows removal of condensate.
-
Glass Trap for Ai -40°C Cold Traps (Second Generation)
Across InternationalAcross International 500mL glass trap for Ai 2nd Gen T40 -40°C UL/CSA certified cold traps. Upward hose barb ports give you safer and easier vacuum tubing connection and removal. Attention! This new glass trap ONLY fits our new 2nd Gen UL/CSA certified T40 -40°C cold traps (released 9/2018).
-
Dry Ice Trap, Twin
Ace GlassTwin chambered dry ice condenser-trap similar to 8748 except dry ice finger condensers in this unit are NOT removable. Ports at top for connecting to Rotary Evaporator and to vacuum source are 3/8" O.D. Condensate stopcock at bottom is 4mm PTFE, 90 degree bore, that allows draining each chamber…
-
Adapter Valve No.15 O-Ring Joints
Ace GlassBorosilicate glass valve adapter with various Hi-Vac valve sizes and (2) No.15 O-Ring joints. Ideal for assembling Schlenk or vacuum lines Comes with (2) size -116 FETFE O-Rings.
-
SYNTHWARE Vacuum Trap with #15 O-Ring Joint
Kemtech AmericaVacuum Trap Body Joint: 45/50 O-ring Joint Size: #15 Outer Body OD: 50mm Outer Body Length: 250mm below joint supplied with two size 116 Viton O-rings
-
SYNTHWARE Vacuum Traps, Hose Connections
Kemtech AmericaVacuum Trap, Hose Connections Available in multiple sizes with various joint sizes, diameter, length, and inner/side tube size.
-
-
O-Ring Style Vacuum Traps
ChemglassSimilar to CG-4515 traps but having an o-ring joint to connect the trap body to the stopper. O-ring joint provides for a vacuum tight, grease free seal and permits the trap body to be easily disconnected from the stopper for cleaning. Serrated hose connections are 13.5mm at the smallest serration…
-
Two-Piece Vacuum Traps with Hose Connection
SP Wilmad-LabGlassThese borosilicate glass vacuum traps have a Standard Taper joint to ease disassembly and allow cleaning/draining. The sidearm 3/8" hose connectors are 180° apart with a bent top stem and provide an easy connection when using rubber tubing. See LG-11020 for body only.