Dpd Chlorine Test Kit

Kit Contains: 100 Chlorine DPD #1 Tablets 50 Phenol Red Tablets 3 Test Tubes, 2.5, 5, 10 mL, plastic w/ caps 1 Chlorine/Bromine Octa-Slide 2 Bar 1 Phenol Red Octa-Slide 2 Bar, pH 6.8-8.2 1 Octa-Slide 2 Viewer

…total chlorine in a simple test sample. DPD chlorine tablets designated “Instrument Grade” are suitable for use with colorimeters and spectrophotometers. For more information on chlorination and measurement of chlorine, order The Chlorine Handbook (Thomas number 0535C36). DPD No. 1…

…per test than tablets Quicker results and clearer colors than tablets DPD 1A and 1B reagents are added to a 5 or 10 mL sample to test free chlorine. DPD 3 reagent is added to the reacted sample to test total chlorine. The 30 mL size provides 144 tests and the 60 mL size provides 288 tests.

Storage: Store at +15°C to +25°C. Precautionary Statement(s): P201: Obtain special instructions before use. P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P308 + P313: IF exposed or…

Storage: Store at +15°C to +25°C. Precautionary Statement(s): P201: Obtain special instructions before use. P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P308 + P313: IF exposed or…

…precise dosing Portable dispensers accurately deliver the correct volume of DPD reagent for free or total chlorine testing. Supplied with enough DPD powder for 100 tests. Easy-to-use design for 5 and 10 mL sample sizes. Thomas numbers 9864H98 and H99 are for test kits using tablet technology.

…0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.8 and 1.0 ppm Cl Sufficient for 50 tests DPD Tablet Octa-Slide (9859H12) For determining free and total chlorine in water Sufficient for 50 tests Employs DPD tablet method: EPA-accepted method for NPDWR Octa-Slide has color standards…

…unit dose, reagents in a convenient foil package. These DPD reagents have been specifically formulated and will provide accurate results with Lovibond and other manufacturer’s spectrophotometers, colorimeters and test kits. Lovibond Powder Pack Reagents are: US EPA …

Direct Reading Titrator (9859K40 and K41) For determining high range chlorine in water Range of 0 to 200 ppm Cl₂ in 4 ppm increments Sufficient for 50 tests at 200 ppm. Uses Iodometric reagent method.

…industry, chlorine tests are used to control bio lm in cooling systems. These tests use the iodometric drop test method or the DPD method to detect free and total chlorine. In the cleaning and sanitation industry our chlorine test kits are used to verify the concentration levels of chlorine. They…

…standard DPD methodology, chlorine dioxide reacts with DPD (N, N-diethyl-p-phenylenediamine) to form a pink product. Interference from free Cl₂ is prevented (up to 6 ppm Cl₂) by the addition of glycine to the sample. Results are expressed as ppm (mg/L) ClO₂ Kit…

…Hach chlorine tests have been accepted by the U.S. Environmental Protection Agency for reporting purposes. Test kits containing DPD colorimetric reagents are used most often for monitoring potable water, swimming pools and waste effluent. Kits for determining higher levels of chlorine use…

…using proper wavelength and DPD test method to meet EPA design specifications for NPDWR and NPDES chlorine monitoring programs (EPA 330.5 and Standard Method 4500). The DC1500 Chlorine Colorimeter Kit includes tablets for 100 tests or liquid reagents for 140 tests, six sample vials, and a sturdy…

Easier to use and more accurate than chemical test kits Total Chlorine Range: 0.00 to 3.50 ppm(mg/L) EPA approved DPD method Accuracy ±0.03 ppm (mg/L) ±3% of reading 0.01 ppm (mg/L) resolution (250 points) Large, easy-to-read digits Auto shut-off Dedicated to a single parameter Designed to…

…from the DPD method. Test kits that employ this chemistry are well suited for use where biocides and chromate corrosion inhibitors are used simultaneously. DDPD reacts with free chlorine to form a purple product. When ammonia or amines are present in the sample, some of the chlorine may exist…

UN Number: UN3316

UN Number: UN3316 pH: (H2O, 20°C) strongly acid Solubility: (20°C) soluble Density: 1.079 g/cm3 (20°C)

pH: 6.5 - 7.5 (H2O, 20°C) Solubility: (20°C) soluble Boiling Point: 100°C Density: 1.01 g/cm3 (20°C)

Solubility: (20°C) soluble Density: 1.25 g/cm3 (20°C)

…their dilution. DPD reacts with hypochlorite ions to form a pink color. Results are expressed as percent (%) NaOCl. Range: 0-1.55% as NaOCl MDL: 0.3% Method: DPD (hypochlorite) Kit comes in a plastic case and contains everything needed to perform 30 tests (except distilled…

…their dilution. DPD reacts with hypochlorite ions to form a pink color. Results are expressed as percent (%) NaOCl. Range: 0-12.5% as NaOCl MDL: 2.5% Method: DPD (hypochlorite) Kit comes in a plastic case and contains everything needed to perform 30 tests (except distilled…

…DPD chlorine Octet Comparator has color standards representing 1.0, 1.5, 2.0, 2.5, 3.0, 4.0, 5.0, and 6.0 ppm Cl₂ Phenol red Octet Comparator has color standards representing pH 6.8, 7.0, 7.2, 7.4, 7.6, 7.8, 8.0 and 8.2 Sufficient for from 100 to 200 determinations, depending on test

…Level for chlorine is 4 mg/L in drinking water. Kit comes in a plastic case and contains everything needed to perform 30 tests (except distilled water): Refill, Low and High Range Comparators, Activator Solution, 25 mL sample cup, 50 uL MiniPet®, and instructions. The DPD Method…

…Level for chlorine is 4 mg/L in drinking water. Kit comes in a plastic case and contains everything needed to perform 30 tests (except distilled water): Refill, Low and High Range Comparators, Activator Solution, 25 mL sample cup, 3.0 mL Syringe, and instructions. The DPD Method references…

…treat potable water, chlorine helps alleviate the adverse effects of iron, manganese, ammonia, and sulfide. The Maximum Residual Disinfectant Level for chlorine is 4 mg/L in drinking water. Kit comes in a plastic case and contains everything needed to perform 30 tests (except distilled water):…

…treat potable water, chlorine helps alleviate the adverse effects of iron, manganese, ammonia, and sulfide. The Maximum Residual Disinfectant Level for chlorine is 4 mg/L in drinking water. Kit comes in a plastic case and contains everything needed to perform 30 tests (except distilled water):…