Desiccant Chamber

Ideal for vacuum drying, degassing and teaching demonstrations, this vacuum chamber can withstand a full vacuum at room temperature. One piece O-ring seals the clear polycarbonate top to white polycarbonate base plate Polypropylene stopcock with Teflon® PTFE plug and tapered hose barb…

Plas-Labs desiccators are designed to protect, store, or assist in moving critical materials and prevent contamination. They are dust and moisture free enclosures which safeguard valuable research specimens or sensitive electronic components. Under positive N2 gas flow, they prevent moisture from…

Plas-Labs desiccators are designed to protect, store, or assist in moving critical materials and prevent contamination. They are dust and moisture free enclosures which safeguard valuable research specimens or sensitive electronic components. Under positive N2 gas flow, they prevent moisture from…

…Our amber units are very effective for protection from harmful U.V. rays for light sensitive components. Multiple Cubicle Desiccators These portable desiccator storage cabinets are much safer than individually stacked units. All storage units are mounted on stainless steel support carts and…

…including racks, trays and instruments, this Vacuum Desiccator provides for much more storage in a single chamber than traditional plastic or glass vacuum desiccator units. All contents can be easily viewed through the desiccator's clear polycarbonate top and bottom. This laboratory grade…

5504-7645 Chamber Package, 115 Volt - No Temperature Control; Humidity (10% to 95% RH) With 3.25 cu. ft. (92 liters) of usable space, the M 5504 Series is ETS’ most compact standard chamber but still provides space sufficient for many applications. Users can select from a wide range of…

5504-7607 Glovebox Chamber Package, 115 Volt - Temperature (10° to 60°C) and Humidity (10% to 95% RH) With 3.25 cu. ft. (92 liters) of usable space, the M 5504 Series is ETS’ most compact standard chamber but still provides space sufficient for many applications. Users can…

…to allow use as a single, spacious chamber for specific storage needs; cabinet can hold up to seven shelves spaced 2” apart; extra shelves sold separately – F43000-0001 Door hinges located on right side Standard Model: Desiccant (sold separately) can be placed below…

…drying apparatus with a 57mm flat o-ring connection between the desiccant flask and the drying chamber to permit easy sample removal after drying. The drying chamber has an I.D. of 2” and is 8” long. The desiccant flask has a 4mm glass stopcock and a serrated connection for the…

…the with a 60mm I.D. flat flange and a quick release stainless steel clamp. on drying chamber has a groove for a silicone O-Ring to make a leak-tight flat flange on desiccant tube. Joints on condenser and flask are 24/40. item consists of condenser, drying chamber, desiccant tube, flask, and O-Ring.

…for drying samples at a temperature as a function of the solvent boiling point. The desiccant flask has a 34/45 outer joint for connection to the drying chamber. All other joints are 24/40. Complete apparatus consists of a desiccant flask, drying chamber, round bottom flask and Allihn condenser.

…path is directly over the desiccant, while in the early stages the desiccant is bypassed. The upper 24/40 joint is offset, condensed liquid does not drop over the inner tube. Opening to the inside cahmber is 40/35. Complete consists of condenser, drying chamber, desiccant tube with stopcock and…

…then ascend to the reflux condenser, condense and flow back through the return tube into the boiling flask. Boiling flask is of 250mL capacity and has a 24/40 joint. Flask with interchangeable stopcock has a 40/35 joint. Complete with condenser, drying chamber, desiccant flask, and boiling flask.

…temperature / relative humidity sensor is mounted on a cord over 7’ long. Place the highly accurate sensor inside a desiccator, refrigerator, drying or other environmental chamber and view simultaneous displays of temperature and RH outside on the large LCD. Recalls min/max readings on both…

…visibility and can be autoclaved. The rims of the desiccator and lid are ground glass and require greasing before use to create an air-tight seal. Also includes a perforated porcelain desiccator plate that fits onto a ridge above the lower chamber. A standard drying agent such as silica or anhydrous…

…Built-in pump has 1.7 m 3 /h capacity and produces <20 hPa (<20 mbar) maximum vacuum. The Model 5301 also has a desiccator mode allowing the use of the heated chamber and vacuum system to dry samples without engaging the spinning rotor. Rotor for 6x15ml conical or 50ml conical tubes,…

"5504-7652 Glovebox Chamber Package, 115 Volt - No Temperature Control; Low Humidity (10% RH to Ambient) With 3.25 cu. ft. (92 liters) of usable space, the M 5504 Series is ETS’ most compact standard chamber but still provides space sufficient for many applications. Users can…

5504-7621 Glovebox Chamber Package, 230 Volt - Temperature (10° to 60°C) and Humidity (10% to 95%) With 3.25 cu. ft. (92 liters) of usable space, the M 5504 Series is ETS’ most compact standard chamber but still provides space sufficient for many applications. Users can select…

…evacuation of distilling apparatus, vacuum desiccators, etc. Freezing trap, when immersed in suitable freezing mixture, removes condensable vapors, gauge liquid or other foreign material accidentally introduced into the system 9466L50 Freezing Chamber has female joint member. Does not…

…small closed compartments, such as reagent storage cabinets, desiccators and safes. Applications:  Static drying of air and gases to a -100° F dew point Convenient drying unit for the analytical balance chamber or other small enclosures Regeneration  The…

…to 50 mL samples, microplates and PCR plates Operational features: Choice of 3 operation modes (vacufuge, centrifuge, and desiccator) for a variety of application needs Choice of 4 heating levels (room temperature, 30°C, 45°C, 60°C) allows safe and efficient…