Cooling Jacket

Compare Tool

Select up to 3 products

Cooling Jacket
1 - 32 of 88
Sort
View
Show
  • Model 8590 SS Container w Cooling Jacket

    Eberbach

    …with Cooling Jacket and press ft lid. Like # 8580 but surrounded by a stainless steel cooling jacket. The cooling jacket is 5 1/2” dia x 4” H. Tablatures for circulating liquid are 3/8” ID x 1 1/2“ long. Ice or dry ice may be added to the surrounding fluid through holes in the jacket top. Complete…

  • Funnels, Addition, Cooling Jacket, Glass Stopcocks

    Chemglass

    Jacket permits the cooling of the contents of the funnel by means of dry ice. Drain outlet is 8mm O.D. With a standard taper top outer joint and lower inner joint, both being the same size, and pressure equalizing arm.

  • Glass Cooling Cells

    Sonics & Materials

    Thomas No. 1147B08 10 ml cooling cell with water jacket. Thomas No. 1147B09 100 ml cooling cell with water jacket.  

  • Reflux Condensers, Double Cooling

    Chemglass

    …reflux condenser employs a double surface area with a cooling finger sealed into the secondary cooling jacket. Serrated hose connections for water connection extend through the outer bulb and have an O.D. of 10mm at the middle serration. The jacket length is 200mm. PLEASE NOTE: THIS CONDENSER…

  • SYNTHWARE Large Cooling Capacity Reflux Condensers

    Kemtech America

    Jacket has an O.D. of 40mm while coil O.D. is 8mm to provide maximum cooling capacity.

  • XK Columns

    GE Healthcare

    …systems Cooling jacket for sensitive purifications Plunger design to ensure a homogeneous buffer distribution and reproducible packingAdapter QuickLock mechanism that facilitates column handling and cleaningFittings for direct connection to chromatographiy systemsCooling jacket for sensitive…

  • Funnel, Addition, with Jacket

    Ace Glass

    Double scale graduated funnel with jacket for cooling with dry ice. Calibrated from stopcock. With 1:5 PTFE stopcock plug; for extra plugs, see 8224. For stoppers, order 8250-12.

  • SYNTHWARE Large Cooling Capacity Reflux Condensers with Removable Hose…

    Kemtech America

    Jacket has an O.D. of 40mm while coil O.D. is 8mm to provide maximum cooling capacity.

  • Funnel Addition, Jacketed

    Ace Glass

    Graduated addition funnels similar to 7268 series, except with outside jacket for cooling and/or heating. Jacket extends from just below shoulder of vessel down to the bottom tube just below the stopcock. Stopcock is either 2 or 4mm bore PTFE plug. Bot

  • Filter Funnels, Jacketed

    Chemglass

    Similar to CG-1402 but with a water jacket enclosing the funnel bowl and upper portion of the stem. Jacket permits heating or cooling of the contents of the funnel during filtration. Stem length listed is the length below the jacket.

  • Condenser, West

    Ace Glass

    With top joint jacketed for water cooling. Jacket length measured from bottom of top joint.

  • Ai R-Series Single/Dual Jacketed Reactors

    Across International

    …insulation jacket (a $399 value) with open/close viewing window and top/bottom adjustable drawstrings, specially designed and made for Ai glass jacketed reactors. These jackets will extend chiller life, allow you to go down to a lower temperature, and also cut your utility bill. Dual jacketed

  • Flasks, Heavy Wall, Round Bottom, 3-Necks, Jacketed

    Chemglass

    Round bottom, HEAVY WALL, three-neck flask with standard taper outer joints on the center and side necks. Entire body of the flask is jacketed and has two hose connections for circulation of heating or cooling liquid.

  • Flasks, Tapered, European Style, 3-Necks, Jacketed

    Chemglass

    European style flask with tapered walls and a shallow hemispherical bottom for more efficient mechanical or magnetic stirring. Entire body of the flask is jacketed and has two hose connections for circulation of heating or cooling liquid. With standard taper outer joints on center and side necks.

  • SYNTHWARE Large Scale Distillation Head

    Kemtech America

    One-piece design. With 10/18 thermometer joint and high efficiency cooling jacket. To be used with 50mm immersion thermometer with 10/18 joint.

  • Flasks, Heavy Wall, Round Bottom, 3-Necks, Half Jacketed

    Chemglass

    Round bottom, HEAVY WALL, three-neck flask with standard taper outer joints on the center neck and vertical side necks. Lower half of the flask is jacketed with two hose connections for circulation of heating or cooling liquid.

  • Concentrator Condensers

    Chemglass

    …highly efficient concentrator. Condensate drains through the side tube which has a standard taper inner joint the same size as the lower inner uptake joint. Serrated hose connection for connecting to vacuum source. Hose connections for both the cooling jacket and vacuum source have an O.D. of 10mm.

  • Peptide Synthesis Reaction Vessels, Jacketed, Lower Drain Valves

    Chemglass

    …of the flange. Flange is also ground to permit a greased seal with any of the corresponding lids. Lower outlet is a CG-511 bottom drain valve. Cooling jacket is equipped with two removable hose connections to reduce the risk of injury while attaching or detaching flexible tubing. Supplied complete…

  • Vessel, Reaction, Jacketed, Ultrasonic, 250mL

    Ace Glass

    Similar to 9833-05 Vessel except jacketed to provide active cooling from tap water or mechanical cooler. Jacket is cylindrical with flat bottom for greater stability. With #25 Ace-Thred center neck and three 14/20 side necks. Code -35 includes our 7506-10 #25 Ace-Thred bushing used to secure a…

  • Buchi R-210 & R-215 Rotavapor Accessories

    Buchi

    …stopcock, PTFE fill tubes, and set of GL-14 hose connections and caps. 1230E21 - Type BY Vertical condenser with additional double jacket for cooling. Additional joint on the top fo the condenser for flexible expansion. For particularly efficient condensation. Evaporating flask feed via…

  • Vessel, Reaction, Jacketed, Ultrasonic, 10-50mL

    Ace Glass

    Similar to 9844-07 Vessel except jacketed to provide active cooling from tap water or mechanical cooler. Jacket is cylindrical with flat bottom for greater stability. With #25 Ace-Thred center neck and two 14/20 side necks. Code -30 includes our 7506-10 #25 Ace-Thred bushing used to secure a 9852-41…

  • Vessel, Reaction, Jacketed, Ultrasonic, 3mL-10mL

    Ace Glass

    Similar to 9843-04 Vessel except jacketed to provide active cooling from tap water or mechanical cooler. Jacket is cylindrical with flat bottom for greater stability. With #25 Ace-Thred center neck and two 14/20 side necks. Code -27 includes our 7506-10 #25 Ace-Thred bushing used to secure a 9852-41…

  • Funnel, Filter, Buchner, with Hose Connections

    Ace Glass

    With jacket for cooling or heating. All porosities of a given size are priced the same. Hose connection is size C.

  • Sublimation Apparatus, Vacuum

    Ace Glass

    …the vacuum connection at the top. The unique design allows the user to submerge the flask in an oil bath almost to the bottom seal on the cooling jacket thereby avoiding premature condensation. 25 mL size has a 34/45 joint; 50 mL size has a 45/50 joint. Vacuum tube on both sizes will accommodate…

  • Bearing, Trubore, Water-Cooled, 10mm

    Ace Glass

    Interchangeable, ground joint bearing with jacket for water cooling. May be operated as high as 2000 rpm using our 8119 high-speed lubricant. Can be operated at 1500 rpm unevacuated using our 8117 Stir-Lube. Hose connections for use with 5/16" or 3/8"ID tubing. Available with PTFE clad joint to…

  • Reflux Condensers, Coil Type

    Chemglass

    Similar to CG-1213, but having a larger diameter jacket and coil, thereby providing maximum cooling capacity, while being shorter in length. Jacket has an O.D. of 41mm while the coil O.D. is 8mm. Excellent for use with high vapor pressure solvents. Condenser has a top outer standard taper joint and…

  • Liebig Condensers

    United Scientific Supplies

    Liebig condensers are used to cool and condense hot vapor as part of a distilling apparatus. This condenser has a straight inner tube that the condensing vapor passes through, and a larger outer jacket that cooling water passes through. Socket is 24/40

  • Flasks, Half Jacketed, with Chem Drain Valves

    Chemglass

    Lower half of flask has a jacket permitting heating or cooling of the contents with fluid from a constant temperature bath. The unique design of the Chem-Drain valve incorporates a PTFE plunger that allows the contents of the flask to drain directly through the bore of the plunger. When closed,…

  • PYREX® 200mm Liebig Condenser with Sealed Inner Tube

    Corning

    …can be used for either distillation or extraction. Although the condensing area per unit length of the 200mm long jacket is low, the large capacity water jacket gives efficient cooling. Condenser tubulations are approximately 10mm O.D. The adapter end is tooled for uniform stopper fit, accommodating…

  • Double Walled GLS 80 Bottles

    DWK Life Sciences (Duran)

    The DURAN® double walled, wide mouth bottles GLS 80 incorporate an integral jacket that isolates the contents from the external environment. Heated or cooled liquids can be circulated through the jacket to control the temperature within the screw topped DURAN® bottle. The DURAN® double…

  • Condenser, Reflux

    Chemglass

    Coil style reflux condenser with a larger diameter jacket and coil, thereby providing maximum cooling capacity, while being shorter in length. Hose connections are on the bottom of the condenser which makes it easier to connect hose/tubing. Jacket has a O.D. of 41mm while the coil O.D. is 8mm.…

  • ICP Series Compressor-Cooled Incubators

    Memmert

    …between heating up and cooling down times in ramp operation is required, cooled incubators with compressor cooling prove to be in peak form – yet still work extraordinarily quiet. Cooling and heating units are situated outside the working chamber inside the air jacket temperature control…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.