Cold Box

…below freezing for four hours Store up to (12) 1.5 mL microcentrifuge tubes Sealed-in insulation material Molded polystyrene box, with cover, will maintain a temperature of -15°C for 1.5 hours (below 0°C for up to four hours) when taken out of a -20°C freezer. Internal…

The Thermo Scientific™ TSX family of cold storage units offers unparalleled performance and sample security, while supporting sustainability goals with ACT™ labeling, ENERGY STAR™ certification, and SNAP compliant hydrocarbon refrigerants and insulation. Take advantage of special…

…Internally-Threaded Caps Polypropylene cap has silicone rubber O-ring for a secure, leakproof seal Maximize tube storage within racks, boxes, and canes Cryogenic Tubes with Externally-Threaded Caps HDPE cap has secure, lip-seal feature so no O-ring is necessary …

Internal Dimensions (l x w x h) : 10-5/8 x 8-5/8 x 3-1/2 in ch 3/8 inch (1cm) holes Designed for the storage of vials or microcentrifuge tubes in cold temperatures Back of box slides open to allow for insertion of gel ice packs Specifically designed for safe storage

QUANTOFIX Chloride semi-quantitative test strips for the determination of chloride (Cl - ) in solutions. *MUST SHIP COLD* Measuring range: 0-500-1000-1500-2000 ->3000 mg/L Cl-

…or 100 cell 2” boxes hold most popular cryo and cold storage vials and fit into standard freezer racks. Boxes have clear lids with locator grid to facilitate sample identification. Polycarbonate boxes are designed to withstand temperature extremes of -196? to 121?. Boxes have drain holes for…

…boxes hold most popular cryo and cold storage vials and fit into standard freezer racks. These boxes offer a convenient and cost effective alternative to polycarbonate boxes for storage of samples. Boxes have clear lids with locator grid to facilitate sample identification. Polypropylene boxes are…

…we don’t just manufacture freezers. We make the cardboard boxes with dividers that professionals need to store their specimens reliably. Our cardboard boxes for cryogenic storage are designed specifically for the extreme cold of a cryogenic freezer at temperatures to -196°C, so they can…

…we don’t just manufacture freezers. We make the cardboard boxes with dividers that professionals need to store their specimens reliably. Our cardboard boxes for cryogenic storage are designed specifically for the extreme cold of a cryogenic freezer at temperatures to -196°C, so they can…

…sample identification Polypropylene boxes will not degrade when exposed to moisture and ultra-cold temperatures as low as -80°C. Superior substitutes for cardboard boxes which tend to degrade and absorb moisture after prolonged use. Boxes with “telescoping” lids accommodate…

Racks hold five boxes each and are constructed of cold rolled steel with baked gray enamel finish. Racks can be wall mounted. Optional locking hinge keeps boxes secure in racks.

Designed for staining, hybridization, washing, etc. Safe for cold room and incubator use Compact size, low profile Double platform models expand usable space The Denville BioRockers™ are "workhorse" rocking platforms that have been designed for long life and…

Super Erecta® steel shelving units are easily assembled without tools and are ideal for laboratory, cold box and clean-room storage applications Each Convenience Pak includes: four shelves, four split posts, split sleeves and leveling bolts Zinc plated with a clear lacquer coating Shelving can…

…Insulated mailers with white box and cold packs in a convenient starter kit. Safely accommodates small bottles, samples or mail order shipments. Light weight, durable, excellent insulating properties. Reusable and recyclable IB 8 ICE BRIX cold packs are bulk packed (COLD PACKS ARE NOT PACKED INTO…

…constant temperature (1°C or -10°C) for up to 10 hours Aluminum Cool Chamber surrounds tubes to guarantee sustained cold temperatures The CoolSafe box is made of triple density expanded polystyrene and molded under extreme pressure creating a durable container that guarantees…

… STAY-DRY* Hanging Dispenser System Place STAY-DRY* dispenser bracket on or near ice machine Secure STAY-DRY* box to bracket using tabs Rip open dispenser box door along perforations and discard Remove STAY-DRY* Ice Packs Repeat process as needed 1Hanging dispensing system…

Provides compression in order to minimize swelling. Can also be used to help prevent turf burns on forearms as well as holding cold/hot packs, bandages and padding in place. Breathable knit design. Washable. Bulk roll comes in dispenser box.

…arrangement for optimum functionality. And sufficient fan power to thaw everything in your freezer quickly and reproducibly. Eliminate edge effects, cold starts and reduce process variation. All with no excess input of heat, no tweaking of controls and no calibration or maintenance required. …

…samples. This simple action decreases sample and reagent thawing times by up to 75% without any application of heat. It eliminates edge effects, cold starts and sample to sample thermal variability. And its fixed platform enables highly reproducible thawing that can be proceduralized and validated…

Permanently notate samples and storage boxes with Thermo Scientific™ Cryoware Permanent Markers and Pens, which can easily withstand cold storage temperatures.

…Refrigerator Preset at 4°C Freezer Preset at -20°C Exterior Adjustable Mechanical Thermostat sealed in UL Listed Explosion Proof Box Unit Must Be Hard Wired in Conduit to 120 VAC Power Source. Power Cords with Plugs are NOT ACCEPTABLE Leveling Legs Keyed Door Lock …

…samples for short or long-term cold storage Ideal for -80°C to -196°C environments Dot and rectangle shaped labels sized for 0.5 to 2.0mL cryogenic tubes or 15mL centrifuge tubes 67 x 25mm (2.6 x 1.0") rectangle for large tube, cryo box and rack labeling Available…

…needs Includes pull out drawer for easy sample retrieval even from the back of the freezer Each lightweight, wire formed rack holds 5 freezer boxes up to 5¼ x 5¼ x 2”H Available in 4 colors for easy sample identification Optional top cover provides flat shelf space…

…in the Grant bio range providing smooth orbital motion for mixing in commonly used vessels – culture flasks, dishes, boxes and tubes. Suitable for use in cold rooms and incubators. Variable speed: 5 to 60 rpm Fixed 7° tilt angle Loads up to 0.5 kg Ambient operating…

…air filter Box Capacity: (18) 2" Boxes (12) 3" Boxes (4) 4" Boxes The 0.9 cu. ft. (25L) -86°C "Shuttle" freezer designed for transporting valuable biological materials, personal storage of high value specimens or cold chain storage and…

…ION-CHILL™ glove provides a thermal, 10-gauge, hi-vis orange terry shell with a brushed acrylic interior and sandy latex palm coating. Application: Cold Weather Applications, Construction, Drywall, Forestry, Masonry/Tile installation, Recycling Operations, Roofing, Shipping/Receiving Brushed,…

…gentle mixing Cold room and incubator safe These labForce® BioRocker™ 3D Mini Rockers provide the perfect 3-dimensional motion for all blot related applications. Their tilt angle and speed have been optimally set for gentle, but thorough mixing in gel trays, boxes and other flat…

…gentle mixing Cold room and incubator safe These labForce® BioRocker™ 3D Rockers provide the perfect 3-dimensional motion for all blot related applications. Their tilt angle and speed have been optimally set for gentle, but thorough mixing in gel trays, boxes and other flat…

50 person First Aid Kit with weatherproof plastic case. OSHA compliant box has easy carry handle or is wall mountable. Weatherproof Plastic , 10.5" x 10" x 3", 50 Person Kit Contents meet or exceed those required items from ANSI Z308.1-2009 Contents exceed requirements of ANSI Standard…

…the input of liquids or gases into reactions. Stopcock is PTFE with a bore of 1mm. Inner joint is a 14/10. CONDENSERSS, COLD FINGER, ADJUSTABLE, MINUM-WARE®, Cold finger style CONDENSERS is made to fit into MW-50 Hickman still head while the lower drip tip directs distillate into the…

…breaker design for the minimum loss of cold temperature during a door opening High performance VIP insulation panels to minimize cabinet heat gain and to improve temperature stability Patented cabinet insulation system designed for optimal performance of cold storage temperature and minimal…

…controlled incubations, the ENDURO™ MiniMix may be used in a cold room or an incubator. The unit is lightweight and compact and easily moved where needed. Labnet Blot Boxes™ are available in two sizes. The small boxes have a capacity for 3-5mL of solution and are perfect for mini protein…