Chloride Test Kit

This kit tests for Chloride in fresh water samples using the Direct Reading Titrator method. Applications: Environmental Education, Aquarium and Fish Farming

…nearly all natural waters, chloride affects human taste above 250 mg/L. High levels inhibit plant growth, and many industrial processes need to limit chloride concentration. Test kits use either silver or mercuric nitrate titrant. The model CD-DT, a multi-range kit, is supplied with the…

Chloride is found in nearly all natural waters and affects human taste above 250 mg/L. High levels inhibit plant growth, and many industrial processes need to limit chloride concentration. Contains 40 tests. Easy to use, disposable, and inexpensive A great way to obtain quick,…

EPA-accepted method for NPDWR and NPDES Employs modified APHA Argentometric method Range of 0 to 50 ppm Cl in 1 ppm increments Sufficient for 50 tests Range of 0 to 200 ppm Cl in 4 ppm increments Sufficient for 50 tests at 200 ppm Employs Argentometric method

Chlorides are tested to control the blow down from boiler and cooling systems in industrial water treatment. The sample is titrated with a standard solution of silver nitrate with chromate used as the indicator. Mercuric nitrate titrants are available for lower level detections. Each kit is packaged…

…test for hydrate alkalinity provides a more accurate value than the calculation method. For hydrate alkalinity, CHEMetrics developed a titrimetric method that uses a hydrochloric acid titrant with a phenolphthalein indicator. The end point of the titration occurs at pH 8.3. Barium chloride is…

…Test Paper provides a simple, reliable, and economical means to measure the concentration of Quaternary Sanitizers, including n-alkyldimethylbenzyl and/or n-alkyl dimethyl ethyl benzyl ammonium chloride, and Rocall II. With color matches at 0-100-200-300-400ppm (parts per million), the test paper…

… Chloride is very corrosive to most metals in systems with elevated pressures and temperatures such as boilers and oil-drilling equipment. The Mercuric Nitrate Method References: APHA Standard Methods, 22nded., Method 4500-Cl- C-1997. ASTM D 512-04, Chloride Ion in Water, Test Method…

Contents: 30 mL Hydrogen Peroxide 3% 30 mL Chloride Reagent A 30 mL Sulfuric Acid, 0.5N 15 mL Phenolphthaein Indicator 0.5% 2 x 30 mL Silver Nitrate 0.171 N 1 Sample Tube, 5-10-25 mL w/ cap  

…funnels, filter paper, stirring rods, test tube brush, water-resistant color charts, soil handbook and soil test report forms. WARNING: Calcium Test Solution included in outfit contains sodium oxalate. Ammonia Nitrogen Test Solution contains mercuric chloride. PLEASE NOTE: Item for sale…

…Determination of Chlorides in Water," Analytical Chemistry, Vol 28, No. 11, pp. 1665-1668, November 1956. J. O'Brien, "Automatic Analysis of Chlorides in Sewage,"Wastes Engineering, pp. 670-672, December 1962. The Chloride Vacu-vials® test employs the ferric…

Method: photometric 2.5 - 250 mg/l Cl?

…increments Test requires three titrations: one to determine bicarbonate and carbonate ions; one to determine sulfate and chloride ions; and one to determine calcium and magnesium ions; sodium concentration is then calculated from the results of the three titrations. Sufficient for 50 tests at 500…

Method: colorimetric with test strips and reagents 0.02 - 0.05 - 0.1 - 0.2 - 0.5 mg/l As 0.1 - 0.5 - 1.0 - 1.7 - 3.0 mg/l As MQuant™ UN Number: UN3316 Storage class: 10 - 13 Other liquids and solids Storage: Store at +15°C to +25°C. Hazard: Irritant;…

For determining salinity (as chloride content) of water Employs modified APHA Argentometric method Range of 0 to 20 ppt salinity in 0.4 ppt increments Sufficient for 50 tests at 20 ppt 

Octet Comparator For determining sulfate in natural waters and waste waters Employs modified APHA turbidimetric method with barium chloride Has color standards representing 20, 40, 60, 80, 100, 120, 160, and 200 ppm sulfate, sufficient for 50 tests

…versatility and accuracy of this test kit will prove invaluable to boiler operators and chemical sales professionals. Model PBC-DT Professional Boiler Treatment/Boiler Feed and Cooling Water Test Kit: Alkalinity CaCO3 10-4000mg/L in six different ranges Chloride Cl 10-8000mg/L in seven…

Chloride Titrant Reagent Refer to the Test Kit Replacement Reagent Section for proper kit replacements Silver nitrate, 1.88 N Bottle/100 mL medicine dropper bottle

Reagent Set includes: Diphenylcarbazone Reagent Powder Pillows, Mercuric Nitrate Titration Cartridge, 0.2256 N and Mercuric Nitrate Titration Cartridge, 2.256 N Used in Digital Titrator Kit Mercury nitrate Method 10 – 8,000 mg/l Approximately 100 Tests

Applications: Laundry and Sanitation This kit tests for caustic levels by adding drops of Barium Chloride solution to a sample where white precipitate will form if carbonates are present. Levels are then determined using the Phenolphthalein Indicator. Range and sensitivity is 1 drop = 0.1 or 1%…

…Test Kit, is designed to meet the demands of specialized salt-water applications. Each kit includes the apparatus and reagents necessary to measure 10 critical parameters. Two tests, ammonia-nitrogen and convenient chloride titration test for salinity, have been designed exclusively for this kit. …

… Nonpolar Column Test Mix, 500 μg/mL in methylene chloride, analytical standard; Intermediate Polar Column Test Mix, 500 μg/mL in methylene chloride, analytical standard; Polar Column Test Mix, 500 μg/mL each component in methylene chloride, analytical standard…

Chloride 2 Indicator Powder Pillows for argentometric method For test kit

…and provides grater accuracy than drop count testing. This sophisticated test kit offers testing of treatment chemicals and feedwater parameters, with the accuracy demanded by water treatment professionals. Test kit parameters include alkalinity, chloride, hardness, sulfite, phosphate, and pH, with…

…This kit provides testing capability for alkalinity, chloride, hardness, sulfite, phosphate, pH, iron, silica, and total chlorine. Includes popular boiler treatment tests Monitors chlorine Determines silica and iron concentrations Provides a wider range of pH testing capability…

… Range/sensitivity is 0-10%/0.2% NaOH # Tests (# Rgts) is 50 at 10% (4) The Sodium Hydroxide Test Kit contains the following: (30 g)               Barium Chloride Powder * (2 x 30 mL)    …

…economical test kit for monitoring scale formation in small industrial boilers, the BSC-1 Boiler Feed and Scale Test Kit uses drop count titration methods to determine levels of alkalinity, chloride, and hardness. Utilizes drop count titration - a simple, economical titration method Kit…

The test measures both ammonium ions and dissolved ammonia in e.g. groundwater and surface water, seawater, drinking water and aquarium water.

UN Number: UN3316

UN Number: UN3316

UN Number: UN3316

…routine monitoring of effluents. The Maximum Contaminant Level for free cyanide in drinking water is 0.2 mg/L. CHEMetrics’ cyanide test kits are applicable to the monitoring of effluents and surface water supplies. It is recommended, however, that the sample be distilled and hydrogen…