Bottle With Spout

Compare Tool

Select up to 3 products

Bottle With Spout
1 - 32 of 39
Sort
View
Show
  • Wash Bottles

    Dynalon

    bottles are supplied in flexible natural polyethylene and are fitted with a white leak proof, wide neck polypropylene spout closure. The wide neck offers easy spill-free filling, and the acute angled, precision molded dispensing spout, ensures a consistent, downward pointing jet. The wash bottles

  • bottles and spouts come with sealer caps Spout openings standard .030 inches, can be enlarged by cutting with scissors Sealer snaps on easily after using and gives tight seal 15 mL bottles are furnished with size 15 caps; 30 and 60 ml bottles with size 18 caps; 120, 180 and 240 ml bottles with

  • …discharge cocks fits all containers with G 3/4" connection threads. Thread adapters facilitate connection of cocks to nearly all containers. With discharge angle and rotatable spout preventing drips With tapered spout for bottles with narrow openings with a diameter from 6 to 8 mm …

  • …handle Wide base for stability High-density polyethylene (HDPE) Jerricans have a built-in spout with separate air cap vent for smooth pouring and venting as needed. The spout retracts into the collar to conserve shelf space when transported or stored. A large, molded-in top handle…

  • Product Dimensions (l x w x h) : 0x3.1x10.875in Tall-style one liter cylindrical bottle supplied with spout and sealer caps. Sealer snaps on easily for tight seal. Spout openings are standard .030" and can be enlarged by cutting tip. Maximum temperature for low-density Polyethylene is…

  • Wide Mouth Unitary Wash Bottles

    Thermo Scientific Nalgene

    …and mismatching of delivery spouts when refilling bottles Made of lower density polyethylene with wide mouth and polypropylene screw cap Delivery tube is molded into bottle wall with inlet at lower-most position in bottle Spout emerges from shoulder rather than through mouth of bottle

  • For use with immunoassay reagent products.

  • Low density polyethylene bottles with polyethylene dropper closure with captive cap. Supplied capped in shrink-wrapped packs of ten. Maximum temperature for low density polyethylene is 80°C.

  • Drop-Dispenser Bottles

    Thermo Scientific Nalgene

    Always dispense just one drop at a time Nalge 2411 Of low-density polyethylene Captive spout in center of screw cap with closure Leakproof

  • …sections for date received and date opened. The pint and quart buffer bottles come with an inner cone cap to prevent leaking. 19 liter sizes are supplied in a cube shaped, cardboard encased polyethylene container with a spout.   Color-Coded Buffers A minute amount of colorant in…

  • Collection Bottle

    Barnstead

    … Also controls still with feed water input from Barnstead D1 or D2 Deionizer (see Thomas numbers 3923J30 and 3923J40) Heavy-walled borosilicate glass bottle with bottom drain hole Control assembly, seated on bottle neck, turns off water and power to still when bottle is full and restores feed…

  • Dispensing Bottles

    DWK Life Sciences (Wheaton)

    Translucent color Very flexible with high impact strength Excellent for mild and strong buffers, good chemical resistance Raise the spout to dispense contents and depress spout to seal bottle

  • Polyethylene Jugs With Spout

    Thermo Scientific Nalgene

    …dispensing Nalge 2340 series Central wide neck, 2 1/2” i.d., has size 83B polypropylene screw cap Easy handling with handle at top and bottom and offset pouring spout with captive plug Leakproof 10 L jugs are 15 1/4” high, 9 3/4” o.d.; 20 L jugs are 20 1/2” high; 11…

  • …makes these bottles ideal for long-term storage. The cap and bottle neck have molded-in tagging points which are designed for securing the cap to the bottle using wire security ties. This makes the bottle tamper-evident. The bottle is approved for use with food products. These bottles are easy…

  • These low density polyethylene bottles are supplied with a ribbon applicator cap. The specially designed spout dispenses a free-flowing ribbon 5/16" wide. Ribbon may be adjusted from thin to thick spread by positioning on cap. The sealer top tongue completely seals the dispenser spout.

  • Wash Bottles

    Dynalon

    …wash bottles are supplied in flexible natural polyethylene and fitted with a white leak proof, wide neck polypropylene spout closure. The wide neck offers easy spill-free filling, and the acute angled, precision molded dispensing spout, ensures a consistent, downward pointing jet. The wash bottles

  • HDPE Lowboys With Spigots

    Thermo Scientific Nalgene

    …dispensing reagents, titrants, distilled water Tolerates strong acids and bases Not recommended for use with most organic solvents Spigot closure is included. Closure size 63 mm; spout takes 5/8” i.d. tubing; serrated tubing adapter that takes 1/4” or 1/8” i.d. tubing is…

  • Bottle Dispensing Autoclavable PPCO 125 ml

    Thermo Scientific Nalgene

    …Polypropylene Copolymer Dispensing Bottles can be used to dispense sterile solutions. Easily view liquid level. May be autoclaved full with cap off spout. Tethered spout cap snaps securely into place and won't pop off or leak when the closed bottle is squeezed. Fine, steady stream…

  • Wide Mouth Wash Bottles

    Thermo Scientific Nalgene

    Made of lower density polyethylene with a wide mouth Polypropylene screw cap, size 63 mm and delivery spout are molded in one-piece Draw tube is polyallomer

  • Teflon™ FEP Drop-Dispensing Bottles

    Thermo Scientific Nalgene

    …and solvents with Thermo Scientific™ Nalgene™ Teflon™ FEP Drop-Dispensing Bottles, featuring excellent chemical resistance for dispensing virtually any chemical. Tethered spout cap snaps securely into place and won't pop off or leak when the closed bottle is squeezed. Usable…

  • Shur/Mount

    General Data Healthcare

    …mediuum is Xylene based and specifically designed for automatic coverslipping insturments. Antioxidant prevents fading of stain over years of storage, UV absorbent to prevent yellowing of resins. Rackaged in 16 oz. bottles with convenient twist-top spout, eliminating messy bottles and droppers.

  • Wash Bottles

    Dynalon

    …sloped shoulder wash bottles feature an acute angled "swan neck" dispensing spout. Maximum temperature of low-density polyethylene is 80°C. Washbottle 250 ML Water (1210A92 ) Product Dimensions (l x w x h) : 0x2.153x8.625in Printed with a water label and white…

  • Pour Spout PP 38-430

    Thermo Scientific Nalgene

    Polypropylene with polyethylene insert For all bottles with 38-430 (38-mm) neck finish

  • …polyethylene squeeze bottle, which comes partially filled with mixed-bed ion exchange resin that exhibits a color change as it nears exhaustion Screw cap, which has built-in filter to prevent resin from flowing out Cap on 50 mL bottle has molded dispensing spout with captive, friction-fit…

  • Made of polypropylene Features a dip-stick well for small volume testing and a pour spout for dripless pouring. Translucent, with a stable square base. Can be autoclaved. Also useful as a drosophila stock bottle. Snap Cap for 1219C81 Specimen Bottle Made of polyethylene; 46 mm

  • Bottle Dispensing Autoclavable PPCO 250 ml

    Thermo Scientific Nalgene

    …Polypropylene Copolymer Dispensing Bottles can be used to dispense sterile solutions. Easily view liquid level. May be autoclaved full with cap off spout. Tethered spout cap snaps securely into place and won't pop off or leak when the closed bottle is squeezed. Fine, steady stream…

  • Spout Closure

    Thermo Scientific Nalgene

    Dispense just one drop at a time, with convenient, one-hand operation Captive spout cap stays in place when bottle is squeezed

  • …bead media for "beadbeating." Beads are sold in one pound bottles with easy pour spouts. Zirconia beads have a density of 5.5g/cc (Twice as dense as glass beads - good for tough tissue). Sold in one pound bottles. Listed bead sizes are median (average) values. Because beads are…

  • M-Zone MicroDispenser™

    Micronova Manufacturing

    …dispensing with no-hassle installation and easy change out of bottles. The compact, gravity fed unit has no tubes and a simple pump action – which means easier bottle insertion and more efficient battery use. A bubble spout screws onto the 500ml bottle. The 2ml capacity green spout works with

  • …for pH 4.01, pH 7.00 and pH 10.01: pH 4.01, pH 7.00 and pH 10.01 are available in the practical 50mL bottles as well as in 1L special bottles with dosing device and pour spout.  The buffer 10.0 is a special case: It is only still suitable for inoLab® device of the series…

  • Fluorinated Polyethylene Jerricans

    Thermo Scientific Nalgene

    Durable and specifically designed for hard use Nalge 2242 HDPE Improved permeation barrier Lower extractables Useful with acids, alkalies and aggressive organic solvents Economical Similar to Nalge 2240 except fluorocarbon surfaces provide improved barrier…

  • High Performance Ammonia Electrode

    Thermo Scientific Orion

    …increased durability with chemical-resistant body. Electrode has a waterproof BNC connector and 1 meter cable. Electrode includes 20 loose membranes (1229G33), 1 pre-assembled outer body and membrane cap (1229G34), 60 mL bottle of electrode filling solution (1229G35), spout cap and tweezers.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.