Autoclavable Plastic Bottle

…wire cage supports the collection vessel and secondary vacuum trap without crowding your workspace. The heavy wall two liter (64 oz) polypropylene collection bottle and all components withstand 27” (686 mm) of mercury vacuum and all parts are steam autoclavable at 121°C (250°F).

These autoclavable caps are designed to ensure the ultimate in product safety.

…kit or refresher set.  Includes an assortment of popular plastic labware items. All items in the set, except wash bottles, are autoclavable.  An excellent value, this set includes 26 labware items in addition to 12 plastic tubes.  Contains: 5 Beakers (50ml, 100ml, 250ml, 500ml and…

…enhances bottle support and improves chemical resistance to Phenol solutions when compared with Noryl™ plastic caps. These caps are available for both polypropylene copolymer (PPCO) bottles, designed for excellent chemical resistance and are autoclavable, or polycarbonate (PC) bottles, which…

…fluid lines Robust threaded ports accept 1/4"-28 UNF(M) fittings Anti-twist design Caps 21942-82 and -83 are designed to fit plastic bottles These Q-series solvent caps ensure a leak-free, vapor-tight seal to protect lab staff from exposure to toxic fumes, prevent ingress of…

…polystyrene and polycarbonate storage bottles and glass bottles with GL45 threads for applications requiring venting. Individually double bagged Features large knurls for ergonomic handling Sterilized (10?6 SAL) by gamma radiation; autoclaving is not recommended Disclaimer:…

KimCote® plastic-coated bottle has enhanced graduations and marking spot is permanent white enamel. This general use bottle is provided with a wide opening (approx. 30 mm ID) GL 45 screw thread and is supplied with linerless autoclavable (121 ºC max) polypropylene blue cap. Bottle design includes a…

…autoclavable aspirator bottles are made from polypropylene and can be used for dispensing distilled water and other laboratory solutions. The leak-proof spigot screwed to the bottle requires only a half turn to open or close. Polyethylene cap and stopcock should be removed before autoclaving.

…pure virgin medical grade plastic Quality Design Dependable Service Bottles are re-usable yet disposably priced Bottles Available in transparent autoclavable polypropylene or less transparent non-autoclavable polyethylene Bottle openings are designed to accept…

Transparent plastic skin protects bottles from mechanical damage and leakage in case of breakage. Autoclavable to 135C, but do not use water for cooling in autoclave.Please note: Cap not included. Synonyms: bottle laboratory; lab bottle Legal Information: DURAN is a registered trademark of…

Standard capacity Nalge 2105 series Autoclavable Rigid and translucent walls Includes polypropylene screw caps Leakproof Excellent chemical resistance

…than glass and plastic bottles. Bottles use a linerless, one-piece autoclavable orange GL45 threaded polypropylene plug seal cap. Individually packaged bottles are sterilized by gamma radiation. Bottles can be autoclaved once at 121°C and 15 psi. Repeated autoclaving weakens polycarbonate…

Excellent chemical resistance Easy-to-fill Autoclavable Leakproof Bottles and lids are constructed of translucent, rigid polypropylene. Unique closure design eliminates closure back-off. Easy pour container finish permits no-spill pouring.

Nalge 2015 series Leakproof, autoclavable and reusable with temperature  range -135° to 135°C (-211° to 275°F) Polypropylene cap; square design allows maximizing storage space Graduated

Resistant to strong acids, alcohols and bases Nalge 2505 Autoclavable Polypropylene screw cap without liner Contact-clear bottles are graduated at 90 mL and 99 mL , accurate to 4 mL . Polypropylene copolymer, polypropylene screw closure. Temperature range -40 to 121°C (-40…

…chemical resistance Autoclavable Polypropylene screw caps Rigid, translucent walls Leakproof Closure size for 4 mL bottles is 13 mm; 8 mL , 30 mL and 60 mL bottles is 20 mm; 125 mL and 250 mL bottles is 24 mm; 500 mL bottles is 28 mm; and 1,000 mL bottles is 38-400 mm.

Molded-in graduations Autoclavable Packed in shrink-wrapped trays Optically clear Nalgene graduated square polycarbonate bottles and closures are made from virgin resin to ensure product integrity. Resins are compliant with FDA guidelines for food contact, and materials meet current USP Class…

…for autoclaving Plastic screw cap with cemented-in rubber liner is suitable for autoclaving up to 121°C 1756K30 is useful for water sampling and for tissue culture 1756K60 bottle has mark at 99 mL level KIMAX-35 bottles are designed from the requirements for milk dilution bottles given…

…can wrinkle, cause leaks or contaminate your reagents Autoclavable/Transparent/Leakproof Includes: Leakproof  polypropylene screw caps. Note: Before autoclaving, completely disengage threads or remove cap. Autoclave empty. Repeated autoclaving will shorten the bottle life.

…bottle when used with a barbed bulkhead fitting (Thomas number 1753M30). 1752M85 and 1752M92 a ccept Nalgene filling/venting closures, 83B size (1753M10). 1752M70 and 1752M75 accept Nalgene filling/venting closures, 53B size (0656U14) . Autoclavable. NOTE: before autoclaving, set…

…of bottle retaining contents if bottle is accidentally broken Non-slip coating allows for greater ease and stability when handling wet or dry Made from clear soda-lime glass that conforms to USP Type III requirements Autoclaving / sterilizing bottle is not recommended Bottles with…

…service ALERT: Hand wash LDPE wash bottles with mild, non-abrasive detergent. Follow with a rinse in tap water and final rinse in distilled or deionized water. To avoid scratching the plastic or printing, do not use abrasive cleaners or scouring pads. Do NOT autoclave LDPE wash bottles.

Perfect for micro work, filling burettes, manometers and small bottles. Polypropylene plastic Steam autoclavable at 121°C (250°F)

Nalge 2121 series Autoclavable bottles with rigid and translucent walls All bottles have size 100 polypropylene cap Excellent chemical resistance NOTE: Not recommended for shipping liquids. Not leakproof.

Graduated to ± 5% accuracy and autoclavable at 121°C Ideal for storing and sterilizing fluids and dry chemicals Supplied with a 45 mm white polypropylene cap Wide mouth eliminates fluid surges while pouring Made of borosilicate glass

Ideal for bacterial, yeast and tissue isolations True one liter volume Autoclavable Excellent clarity and mechanical strength Non-cytotoxic USP class IV Recommended operating temperature: 4 to 22°C Storage to -70°C Leakproof up to 15,810 x g

Leakproof bottles are ideal for a wide range of liquids and solids High performance polypropylene bottle with polypropylene screw cap Autoclavable Wide mouth for easy filling Wide mouth bottles, constructed of high-clarity polypropylene, are available in a full range of sizes…

…high-density polyethylene Nalge 2018 series Economical, most chemical and break resistant of all Nalge square bottles High-density polyethylene bottles have polypropylene screw cap and leakproof closure Usable from -100° to 120°C (-148° to 248°F); not autoclavable

…polyethylene terephthalate (PET) bottles Ideal for mixing, sampling and storage in environments ranging from -40° to 50°C Raised graduations Neck ID: 29 mm Includes polypropylene caps Sterilized using gamma radiation Individually bagged Disposable Not autoclavable

…to most acids, alcohols and bases Contact-clear bottle provides visible liquid level Repeatedly autoclavable and guaranteed leak-proof Closure size for 60 mm bottles is 28 mm; 175 mL bottles is 38 mm; 250 mL bottles is 43 mm; 500 mL bottles is 53 mm; 1,000 mL bottles is 63 mm.

…-270°C to 250°C Autoclavable Linerless, leakproof closure Nalge 1630 series Inert to virtually all chemicals except molten alkalai metals, fluorine at elevated temperatures, and certain complex halogenated compounds at elevated temperatures and pressures. Translucent bottles allow liquid levels…

…walls; autoclavable Usable from 105°C to 150°C; bottle without cap usable to 205°C For high purity analysis or storage; these bottles can be rigorously cleaned in boiling nitric acid. Closure size for 30 and 60 mL bottles is 20 mm; 125 and 250 mL bottles is 24 mm; 500 mL bottles is 28 mm;…