Air Sampling Canisters

Compare Tool

Select up to 3 products

Air Sampling Canisters
1 - 16 of 16
Sort
View
Show
  • air sampling canisters feature our unique Siltek treatment technology. Even highly active components, at low parts-per-billion concentrations, can be readily sampled and stored without loss. The RAVE valve is a high-quality, metal-to-metal seal, 2/3-turn valve with metal diaphragms to prevent sample

  • …on the canister. The unique holder attaches the handle and base to the canister without welds and protects the canister, tube stub, and valve. Each canister is slightly pressurized with contaminant-free nitrogen prior to shipment. Dimensions/Weights of Air Canisters Can Volume—Dimensions:…

  • Restek's passive air sampling kit incorporates all the hardware necessary to collect air samples and is easy to assemble for field sampling.* The improved filter design greatly reduces the number of potential leak sites. The passive air sampling kit is available in seven sampling flow ranges and…

  • These small canisters are designed for controlled sampling, such as personal air sampling, as an alternative to tube and pump samplers. The 1,000 cc canister is suitable for sampling volatile organic compounds in air according to methods TO-14A, TO-15, IP-1A, ASTM 5466, OSHA PV 2120, and NJ DEP Low…

  • Restek’s air canister tripod holds two canisters simultaneously for collocated ambient air sampling. The custom-designed bracket holds most 1, 3, and 6L canisters* securely without any tools. Lightweight (12 lb) and compact for easy storage and transport Extends from 6' to 9'…

  • …gauge Diaphragm rebuild kits available to extend the life of your valves American-made valves from Restek, your trusted partner for air sampling and chromatography Restek Air Valve Excellence (RAVE) is also great for upgrading existing air canisters to improve reliability and performance

  • …to stem fitting to open canister. Attach quick-connect stem protector to stem fitting when not sampling to prevent canister from accidentally opening. Connection: 1/4" tube fitting. Note: Quick-connect body fitting (cat.# 24187) must be ordered separately to sample with quick-connect stem…

  • … SUMMA canister equivalent. Featuring the proven long life, leak-free performance, and effortless operation of the new RAVE valve U.S. EPA Methods TO-14A and TO-15 regulate the collection, storage, and analysis of volatile organic compounds (VOCs) using treated air sampling canisters. Restek…

  • air samples and is easy to assemble for field sampling.* Kit includes flow controller, critical orifice, 2 µm frit filter, vacuum gauge, and sample inlet. The gauge and sample inlet are downsized for use with smaller canisters. Provide accurate integrated sampling without a sampling pump…

  • When cleaning SilcoCan or TO-Can canisters, it is important to use humidified air or nitrogen to help remove volatile organic contaminants. Restek's humidification chamber is made of acrylic and withstands pressure up to 90 psi. The 1/4-inch inlet and outlet compression fittings allow easy…

  • …designed to simplify both automated and manual air sampling. The easy-to-use keypad and graphic display facilitate the programming of up to 12 timed events. They offer the convenience of remote start/stop sampling and permit intermittent sampling throughout a test period. The LCD remains in sleep…

  • …6 L canisters for grab air sampling Variety of orifice sizes for fast sampling from 5 to 60 minutes Connect 1/4" compression fitting directly to canister valve inlet Replaceable frit protects orifice and valve from particulates Sample inlet design minimizes water entry into sampling

  • …or pressure before going into the field. These compact, convenient units are ideal for real-time calibration of air flow controllers, passive sampling kits, air canisters, sampling pumps, and more. They measure absolute pressure, mass flow, volumetric flow, and temperature of 30 different gases…

  • …Micro-QT valves Note: A RAVEqc valve bracket is required for use with Restek 1, 3, 6, and 15 L air sampling canisters when using the compression fitting mounted directly on the 1/4" canister tube stub. This bracket is not needed when using Restek miniature canisters or Entech canisters.

  • … Stainless steel tee with orifice Variety of orifice sizes for sampling from 4 minutes to 10 hours 1-1/2" vacuum gauge (–30" Hg to 0" Hg) 2 µm frit filter for insertion into 1/4" compression sample inlet Air sampling canisters sold separately.

  • sample loading and unloading as well was cleaning easy when using the Tray Dryer. Microwell Plate Holder (1177K20): Solid aluminum base tightly holds microplates. Eliminates air gap on bottom of plate for excellent heat transfer to microplate. Gives temperature stability to small samples

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.