2 mL
-
Cryogenic Vials
CorningPolypropylene construction withstands temperatures down to -196°C Sterilized by gamma radiation Certified non-pyrogenic Non-pyrogenic vials are ideal for use cryogenic workstations, racks and trays and come in a variety of capacities. Internal and external thread vials are…
-
Sterile, Polypropylene Cryogenic Vials
Thermo Scientific NalgeneNon-cytotoxic and non-pyrogenic Nalgene, linerless seal ring system External thread provides no risk of contaminating contents of vial Self-standing without a holder; conical bottom allows complete sample retrieval Deep-skirted closure allows single-handed aseptic technique without…
-
Made of polypropylene Having all the advantages of our popular T341T Series, the specially formulated polypropylene used to manufacture these tubes provides a low adhesion surface to obtain maximum sample yield. Ideal for research procedures such as nucleic acid amplifications, protein work…
-
Microtips
DWK Life Sciences (Wheaton)These tips are the highest quality pipette tips that enhance the precision of Socorex and other brands of pipettes. Tips are designed for a perfect fit which reduces premature detachment of tip, provides consistent results and maintains an absolute seal to the pipette shaft. Made from high grade,…
-
2mL Empty FastPrep® Tubes
MP BiomedicalsEmpty FastPrep tubes are 2mL volume and are used to manufacture all MP Bio Lysing Matrix Tubes. They are available for purchase empty for those who wish to fill their own tubes. Non Skirted. Caps not included.
-
Screw Cap Micro Tube
SarstedtThe Sarstedt screw cap micro tube comes with a skirted base and knurls and has a volume capacity of 2 mL. Polypropylene construction gives good impact resistance for rigorous use. With skirted base, with knurls, without closure, no print Without cap
-
Latex (Natural Rubber) Dropper Bulbs
Heathrow ScientificFlexible, easy-to-attach bulbs designed for use with Pasteur pipettes, small pipettes, and medicine droppers.
-
Microcentrifuge Tubes without Caps
Globe ScientificThese polypropylene (PP) microcentrifuge tubes without cap are resistant to most chemical reagents and can be autoclaved at 130°C. The tubes are offered in 1.5mL and 2mL sizes.
-
Cryotube, premium, w/external thread. Vol. 2ml/f12.4×48.5, self-standing.…
American Scientific ProductsMolded from high quality medical polypropylene material, produced in a clean room, these premium cryo tubes withstand temperature low to -196°C under gaseous phase of liquid nitrogen. The special cap pf external thread design and with silicone rubber liner gasket eliminates the possibility of…
-
Feature screw caps that provide a tight secure seal Sterile Attached cap with black silicone O-ring Withstands a maximum RCF of 20,000 x g
-
-
Material: Reinforced polypropylene to withstand high impact forces with silicon o-ring Certification: RNase & DNase Free Compatible with: Bead Ruptor 12 and Bead Ruptor 24 Material: Reinforced polypropylene O-Ring: Silicone Processing Range: 0.10 mL to 1.5 mL Temperature…
-
Cryogenic Vials with Bar Code
Thermo Scientific Nalgene1.2, 2.0 and 5.0mL standard and 1.5mL SYSTEM100™ cryogenic vials with bar code are ideal for automated data collection, sample inventory or to mask the identity of samples Code 128-numeric barcode is printed in black on white background Human readable is printed below bar code Barcodes are…
-
CryoPure Tube
SarstedtThe Sarstedt cryopure tube, with a durable construction, is an ideal accessory to have in any chemical laboratories, research facilities, manufacturing industries and pharmaceutical factories.
-
Low DNA-binding screw cap micro tubes are ideal for all applications involving DNA. They can be used for the storage of plasmids, oligonucleotides, and cell extracts and allow maximum DNA recovery even after a long storage period and with very small volumes.
-
Wide Opening Screw Top Glass Vials
Agilent TechnologiesAgilent provides a wide variety of vials and cap compatible with the HTC LC Injector listed in the Vials and Caps section. CTC recommends using Silicone/PTFE and PTFE/Silicone/PTFE septa for purity and penetration properties. Below are featured the most popular vials and caps used with the HTC. …
-
Unattached HDPE rim seal caps provide a tight secure seal Polypropylene Self-standing Sterile Withstands a maximum RCF of 20,000 xg
-
-
-
Snap Cap Microcentrifuge Tubes
Globe ScientificThe Globe Scientific snap cap microcentrifuge tube is made of polypropylene material which offers durability and good chemical resistance. It is used in scientific laboratories to store small volume of chemical samples and reagents.
-
Vial 2 ml
DWK Life Sciences (Kimble)ACCUFORM® micro-vials have a V-shaped interior to enable recovery of a minute residual sample by means of a syringe needle. Designed for an aluminum seal Graduated Closures not included Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I…
-
E-C Vials w / Rubber Lined Caps, Clear, 2 ml
DWK Life Sciences (Wheaton)Wheaton Sample Vials, 2mL or 0.07oz, Clear, 8-425 Finish with 14B Rubber Liner, Type I Borosilicate Glass (2 mL E-C Vial, Glass Clear, 8-425 Rubber Lined Cap)2 mL E-C Vial, Glass Clear, 8-425 Cap, Rubber. Wheaton Glass E-C Sample Vial, with Phenolic Teflon-Faced Rubber Lined Cap Packaged…
-
HTC PAL Liquid Injection Vials and Caps
Agilent TechnologiesAgilent provides a wide variety of vials and cap compatible with the HTC LC Injector listed in the Vials and Caps section. CTC recommends using Silicone/PTFE and PTFE/Silicone/PTFE septa for purity and penetration properties. Below are featured the most popular vials and caps used with the HTC. …
-
General Storage Cryogenic Vials
Thermo Scientific NalgeneEconomical, non-sterile without printing or graduations Deep-skirted screw closure design minimizes risk of contamination Self-standing without a holder; conical bottom allows complete sample retrieval Externally-threaded polypropylene vials and high-density polyethylene closures minimize…
-
Screw Cap Micro Tube
SarstedtThe Sarstedt screw cap micro tube, with a durable construction, is an ideal accessory to have in any chemical laboratories, research facilities, manufacturing industries and pharmaceutical factories.
-
Microcentrifuge Tubes with Tethered Caps
Caplugs Evergreen®Microcentrifuge tubes fit all standard microcentrifuges and cover a range from 250 µl to 1.8 mL. Tubes come in variety of material options and different styles, such as standard, thin-wall or graduated. Polypropylene tubes withstand up to 11,600 × g and polystyrene tubes…
-
Economical, Sterile Cryogenic Vials for General Storage
Thermo Scientific NalgeneSame as 5150C12 series, except bulk-packed Conical bottom allows complete retrieval of sample Non-cytotoxic; non-pyrogenic When used with cryogenic holder, base of vial interlocks with holder to permit one-handed replacement of closure. Fill line, graduations and large marking area on vial.…
-
Costar Microcentrifuge Tubes
CorningDNase/RNase-free External graduations and frosted writing spot for easy sample identification Flat cap surface for convenient labeling Withstands maximum RCF of 17,000 x g Costar microcentrifuge tubes are certified RNase-/DNase-free and are autoclavable. The tubes are made of polypropylene.
-
E-C Sample Vials w / out Caps, Clear, 2 ml
DWK Life Sciences (Wheaton)Volume (mL) 2 Tube Material Borosilicate Glass Tube Bottom Shape Flat Tube Color Clear Cap Diameter (mm) 8 Autoclavable Yes Height (in) 1 1/2 Outside Diameter (in) 15/32 Height (mm) 38 Outside Diameter (mm) 12
-
Screwcap Microcentrifuge Tubes
Globe ScientificThese disposable screwcap microcentrifuge tubes are available sterile or non-sterile. The sterile tubes include a cap with a clear (natural) nitrile o-ring. All are DNase, RNase and Pyrogen free. These disposable screwcap microcentrifuge tubes are available sterile or non-sterile The sterile…
-