test tube, Supplies
-
OneRack® Half-Size Delrin® POM Test Tube Racks
Heathrow ScientificExtra tough to resist most acids, solvents, and heat. Extra-tough storage for smaller spaces. These durable racks are molded in a single, continuous piece—no assembly required and no detachable pieces. Racks are made of Delrin® fiberglass-reinforced polyoxymethylene (POM), an…
-
Polypropylene Test Tube Racks
BrandTech®Polypropylene racks snap together for easy assembly, sturdy construction, stackable, and are available in four colors. Will not float in waterbath. Alphanumerical positions for clear sample identification. Wide spaces between positions. Operating temperature -20 to 90°C. Autoclavable at 121°C.
-
Scienceware® No-Wire™ Test Tube Racks
SP Bel-ArtGreat alternative to wire racks Stackable Available for 6 standard tube diameters Available in 3 colors Dimensions: 246mm x 104mm x 64mm high (9.7" x 4.1" x 2.5") Autoclavable at 121°C (250°F) Rugged racks are molded of autoclavable polypropylene. Footprint dimensions…
-
Unwire Polypropylene Test Tube Racks
Thermo Scientific NalgeneReady-to-use No assembly required Provides an unrestricted view of tubes Available in 2 sizes: 13 and 16 mm and four colors: white, blue, green and red. Do not autoclave.
-
Unwire Polypropylene Test Tube Racks with Handles
Thermo Scientific NalgeneNon-scratching Empty racks can be stacked Tube-centering depressions in bottom shelf are perforated. The hole rows have molded-in numbers and letters. Not autoclavable. All racks are 115 mm wide x 95 mm high.
-
Constructed of a special blend of polypropylene, these autoclavable racks will sink in a water bath Interlocking feet allow racks to be stacked while not in use Racks feature end plates for labeling. Rows are numbered and lettered for tube identification. Outside dimensions: 9.7” x…
-
Scienceware® No-Wire™ Test Tube Half Racks
SP Bel-ArtCompact size polypropylene plastic racks save space in water baths, laminar flow hoods and fume hoods. Available in 5 grid sizes to accommodate the full range of laboratory test tubes Steam autoclavable at 121°C (250°F) Dimensions: 12.8 x 10.5 x 7.2cmH (5.1 x 4.1 x 2.8")
-
Heavy Duty Cube Test Tube Rack
United Scientific SuppliesA very sturdy one piece molded polypropylene rack. All four sides can be used interchangeably for 12mm through 25mm diameter tubes. 88 spaces on its four sides
-
Biotransport Test Tube Carrier
Thermo Scientific NalgeneDesigned for transportation of potentially hazardous materials in racks Constructed of clear polycarbonate with a silicone gasket Autoclavable Four polysulfone clamps securely lock the top and bottom together. Dimensions: 14.5” x 7.3” x 6.687” (368 x 184 x 171…
-
Poxygrid® "Rack and a Half" Test Tube Racks
SP Bel-ArtFor High Volume Work High quality epoxy-coated wire racks in convenient extra-long sizes for volume test tube work. Epoxy coated steel wire is chemical and corrosion resistant Steam autoclavable at 121°C (250°F)
-
-
Test Tube Slant Racks
Thermo Scientific NalgeneIncubate liquid cultures on a slant using Thermo Scientific™ Nalgene™ Test Tube Slant Racks. Slant racks allow 5 or 20 degree tilt to allow media to harden at an angle for incubating liquid cultures. These racks are keyed with numbers and letters for easy identification and are…
-
Poxygrid® "Half-Size" Test Tube Racks
SP Bel-ArtExcellent space-savers for use in water baths, laminar flow hoods, fume hoods or any place where space is limited. Choice of three colors: orange for biohazard warning, green and blue for general lab use. Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy …
-
Unwire Half-Racks For 30 mm Test Tubes
Thermo Scientific NalgeneMolded of glass-reinforced polyketone No vinyl or epoxy coating to chip or scratch Assorted colors available Racks are molded in one-piece in a 3 x 3 array. The three-tier design has letters and numbers to identify tube locations.The racks’ thermal properties allow both autoclaving and…
-
Foam Test Tube Racks
Bio PlasFlame Retardant Color: Charcoal Long wearing Chemical and solvent resistant Float on H20 bath with full tube and sample Ideal for refrigerated or frozen storage samples All tubes can be decanted simultaneously Low profile: Will not tip over easily Lightweight: Weighs less…
-
Wooden Test Tube Rack, 13-Tube
United Scientific SuppliesTwo-tier rack with thirteen 25mm holes, and six drying pins Solid hardwood construction Polished to minimize damage from spills
-
20 - 21mm, 40-Place Polypropylene Test Tube Racks
Globe ScientificDimensions: 246 x 105 x 72mm Racks are shipped flat for easy storage Easy to assemble: simply fold and snap together securely Racks are Autoclavable at 121°C for 20 minutes Can be used dry, wet or in water baths and will not float Special design allows…
-
Rugged racks are molded of autoclavable polypropylene. Footprint dimensions fit many different auto samplers. The rack can sink in a water bath and remain stable even in agitated water. Each rack features end plates for labeling as well as numbered and lettered rows for tube identification.…
-
Racks Test Tube w/Pins
GSC International, Inc.Test tube racks are excellent space savers and can act as an extra pair of hands in the lab. There are 6 holes to hold tubes, as well as 6 pins for letting the tubes dry. PRODUCT WARNINGS WARNING: This product can expose you to chemicals including styrene, which are known to the State…
-
Test Tube Supports
DynalonTest Tube Supports for 10, 13, 16 mm tubes. Acrylic units have clear shelves with white sides and bases.
-
Tube Racks, Micro
DynalonTube Rack Micro 1.5ML (1212Y33) Product Dimensions (l x w x h) : 8.25x3.5x1.937in Microcentrifuge Tube Rack PP, for 1.5ml tubes. Racks allow storage of 20 micro test tubes. Top step is numbered from 1 to 10, lower step is numbered from 11 to 20. Made of autoclavable…
-
Scienceware® Stack Rack® Test Tube Racks
SP Bel-ArtMatch Rack Material to Lab Use These sturdy, rigid racks feature interlocking end plates with handles for secure stacking when loaded with tubes up to 10cm (4") long. Rows are numbered and lettered for easy tube identification. All racks are steam autoclavable at 121°C (250°F). …
-
Unwire™ Test Tube Racks: Resmer™ Manufacturing Technology
Thermo Scientific NalgeneSmooth finish leaves fewer places for contaminants to lodge; no welds to break, no sharp edges. Endplates accept large labels for easy identification of samples. Higher specific gravity than water so it stays submerged in a water bath and won't float. Withstands most lab chemicals and…
-
Bel-Art® Poxygrid Test Tube Racks
SP Bel-ArtChoice of Four Colors and Multiple Sizes Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy. Orange racks can be used for biohazard warning, yellow for radioactive warning. Epoxy coatings are unaffected by organic solvents, salts, weak acids and weak…
-
Stainless Steel Test Tube Rack
United Scientific SuppliesSturdy Z-shaped rack made from a single sheet of heavy gauge Stainless 304. Rack features 25 wells in 5 rows, for tubes up to 16mm in diameter. Polished, smooth surface facilitates easy cleaning and labeling.
-
Unwire™ Half-Racks: Resmer™ Manufacturing Technology
Thermo Scientific NalgeneConstructed with Thermo Scientific™ Resmer™ Manufacturing Technology. Racks are repeatedly autoclavable. Smooth finish leaves fewer places for contaminants to lodge; no welds to break, no sharp edges. Endplates accept large labels. Rack withstands most lab chemicals and…
-
Test Tube Rack Set
United Scientific SuppliesThis set contains twleve 24 mL glass test tubes with rubber stoppers, and a brightly colored two tiered test tube stand.
-
Test Tube Rack For 60 Tubes 20 mm
Thermo ScientificThermo Scientific™ Cimarec™ i Test Tube Racks for use with Telesystem Series Stirrers. Stainless-steel test tube rack Ensure test tubes are precisely centered over stirring point Rack holds 20 mm tubes
-
Autoclavable Rows are numbered and lettered Base plate has rounded wells with drain holes. Molded cutouts in end panels form handles. 9259L10 and L20 are 213 x 110 x 111 mm high; 9259L30 through L50 are 213 x 110 x 127 mm high.
-
Rugged racks are molded of autoclavable polypropylene. Footprint dimensions fit many different auto samplers. The rack can sink in a water bath and remain stable even in agitated water. Each rack features end plates for labeling as well as numbered and lettered rows for tube identification.…
-
Rugged racks are molded of autoclavable polypropylene. Footprint dimensions fit many different auto samplers. The rack can sink in a water bath and remain stable even in agitated water. Each rack features end plates for labeling as well as numbered and lettered rows for tube identification.…
-
Aluminum Test Tube Baskets
Heathrow ScientificIdeal for washing and storing test tubes Use these lightweight yet strong baskets with mechanical washers and autoclaves. Durable construction will withstand repeated use in the lab.