70% IPA - 30% DI Water, Non-Sterile
-
TekniMax ™ EX Knitted Microfiber Heavy-weight and durable, TekniMax™ EX utilizes a proprietary weaving pattern to create pillowed loops of sweeping power to efficiently wipe away micro-contamination from even the roughest surfaces. APPLICATIONS Best choice for…
-
TekniClean ™ LX Polyester Knit Wipers Available in cleanliness levels for ISO 4 and higher cleanrooms with edge finishes suitable for a wide range of applications. TekniClean™ LX is made via an Ultra-Clean proprietary manufacturing process that reduces the potential for shedding…
-
Extremely soft polypropylene and pure IPA bring wet wiping to delicate, scratch-sensitive surfaces. With high resistance to acids and many chemicals, these wipes are excellent for removing residues from surfaces and general wet wiping. Recommended for ISO 5-8 critical environments. Features …
-
PROSAT® Sterile™ Polynit Heatseal LE Wipes are made of 100% knitted polyester Polynit Heatseal, presaturated with a blend of 70% isopropanol and 30% water for injection (WFI). Each lot is tested before release and low endotoxin certified to less than <1EU/wipe. The sealed edge…
-
TekniCleanTM LX Polyester Knit Wipers Available in cleanliness levels for ISO 3 and higher cleanrooms with edge finishes suitable for a wide range of applications, Teknipure™ LX is made via an Ultra-Clean proprietary manufacturing process that reduces the potential for shedding while e…
-
Pre-Wetted Wipers
ValutekValutek’s pre-wetted spunlace non-woven wiper is composed of a hydro entangled, nonwoven blend of 55% cellulose and 45% polyester pre-wetted with a blend of isopropyl alcohol and DI water. The pre-wetted format enhances the wipers absorbent capacity, effectiveness, and reduces airbone…
-
FREE-SAT™ ULTIMATE 70™ Pre-Saturated Polyester Wipers
High Tech ConversionsSealed edges Cleanroom Class 10 (ISO Class 4) 100% Polyester Pre-saturated in 70% IPA/30% DI Water FREE-SAT ULTIMATE 70™ pre-saturated wipers are made of 100% polyester. These wipes have heat sealed edges. A laser beam cuts and melts each fiber along the edges, eliminating…
-
Teknisat nonwoven wipes are made from a hydroentangled of 55% cellulose / 45% polyester which creates a strong, clean & absorbant wiper. Saturated with 70% Pure Isopropry Alcohol & 30% 18Mohm DI water in precise saturation level provide excellent wipe down/pick up with economy in mind. This…
-
Pre-Saturated USP <797> 70% IPA/30% Non-Sterile 7" x 15" Polyester Use with: TX7108 Full Size Mop 25/Bag x 4 Bags/cs + 4 pads - QTY 100 + 4 pads
-
Tekniclean microfiber wipes are constructed with mixed weave yarn, as fine as 0.1 decitex, knitted extremely tight to ensure durability. The structure of the yarn (30% Nylon / 70% Polyester) provides hydrophilic properties of nylon, loipophilic polyester properties, and the capillary effect of the…
-
Pre-Wetted Wipers
ValutekValutek’s pre-wetted pressure-heat sealed polyester wiper is composed of 100% continuous-filament polyester fabric pre-wetted with a blend of isopropyl alcohol and DI water. The pre-wetted format enhances the wipers absorbent capacity, effectiveness, and reduces airborne contamination from…
-
PHARMA-SAT PLUS™ 9 x 11" 70% IPA Poly/Cell, Low Endotoxin Non Sterile Wiper, 50…
Acute Care PharmaceuticalsPharma-Sat Plus™ wipers are low endotoxin, non-sterile, ISO Class 5, non-woven, 45% polyester / 55% cellulose blended wipers. Our economical, non-shedding, pre-saturated wipers can be used throughout your cleanroom for cleaning, disinfecting, spill control and wipe down of products.
-
PolySat incorporates soft, 100% melt-blown polypropylene substrate pre-wetted with a 0.2 µm filtered, 70% isopropyl alcohol/30% deionized water solution. Packaged in a reclosable slider bag, PolySat is convenient for cleaning sensitive surfaces in controlled environments.
-
TekniMaxTM DX Nonwoven Microfiber Designed for frequent use on transparent or sensitive surfaces, TekniMax™ DX restores cleanliness by removing haze, fine particles, or oily residue build-up in a single swipe APPLICATIONS Optics & Sensor Cleaning Polishing Surfaces…
-
TekniClean ™ LX Polyester Knit Wipers Available in cleanliness levels for ISO 4 and higher cleanrooms with edge finishes suitable for a wide range of applications, Teknipure™ LX is made via an Ultra-Clean proprietary manufacturing process that reduces the potential for shedding…
-
AlphaWipe is constructed from 100% continuous-filament polyester in a double-knit, no-run interlock pattern. Cleanroom laundered and packaged, AlphaWipe is an ultraclean and highly sorbent wiper ideal for critical environments. AlphaWipe has a laundered cut edge. It exhibits low particle and fiber…
-
Combining the benefits of validated sterility, a clean nonwoven and the all-purpose concentration of 70% IPA, these wipes are versatile and dependable. Packaged in a convenient resealable pouch, a range of wet wiping tasks that require validated sterility become more cost effective and efficient.…
-
TechniSat incorporates a pre-wetted fabric blend of nonwoven hydroentangled 55% cellulose and 45% polyester. This fabric combines the highly absorbent properties of a natural fiber with the cleanliness and strength of a synthetic fiber. It offers low particle counts, low extractable levels and…
-
Pre-Wetted Wipers
ValutekValutek’s pre-wetted laser sealed polyester wiper is composed of 100% continuous-filament polyester fabric pre-wetted with a blend of isopropyl alcohol and DI water. The pre-wetted format enhances the wipers absorbent capacity, effectiveness, and reduces airborne contamination from…
-
9" x 9" 70% IPA Presat Polypropylene Pouches
FG Clean WipesValidated sterile for the most exacting standards, these wipes feature extremely soft polypropylene and pure IPA for wiping delicate, scratch-sensitive surfaces. With high resistance to acids and many chemicals, these wipes are excellent for removing residues from surfaces and general wet wiping.…
-
MiraSAT™ 70/30 Wipers
Foamtec InternationalMiraSAT™ 70/30 is pre-saturated with 70% Semiconductor Grade IPA & 30% Ultrapure Water(UPW) & incorporates Foamtec’s industry-leading MiraWIPE™ Microfiber sealed edge wiper. The unique woven microfiber wiper wetted with only 7.2mL of fluid enables scrubbing like cleaning…
-
TekniZorb ™ LXS Meltblown Polypropylene TekniZorbTM LXS offers a very low-shedding wiping solution to deposit IPA while effectively removing residue from the surface in your controlled environment. APPLICATIONS Ideal for efficient surface cleaning and sanitization between…
-
PROSAT® Theta™ Wipes
ContecThese PROSAT® wipes are manufactured from a lightweight hydroentangled cellulose/polyester and saturated with a solution of 70% USP grade IPA and 30% deionized water. A cost effective wipe ideal for transfer disinfection and general cleaning, PROSAT Theta wipes offer a soft and durable wipe…
-
PolySat incorporates soft, 100% melt-blown polypropylene substrate pre-wetted with a 0.2 ë_m filtered, 70% isopropyl alcohol/30% deionized water solution. Packaged in resealable flexpacks or flip-top tubs, PolySat is convenient for cleaning sensitive surfaces in controlled environments. …
-
These PROSAT® Sterile™ Theta™ Wipes are manufactured from a lightweight hydroentangled cellulose/polyester and saturated with a solution of 70% USP grade IPA and 30% deionized water. A cost effective wipe ideal for transfer disinfection and general cleaning, PROSAT®…