4" x 4"
-
M1 C30L Nonwoven Polyester/Cellulose Cleanroom Wiper
M1 (a Thomas Scientific Brand)Made with hydroentangled blend of 55% cellulose / 45% polyester; providing economical performance & purity. This creates a strong, clean, and very absorbant wipe for liquid removal or lint free wiping in controlled areas. This nonwoven wipe exhibits lower particle & fiber release than…
-
M1 Technology C30L Cleanroom Polycellulose Wipers - Lightweight
M1 (a Thomas Scientific Brand)The C30L Cleanroom Wiper is a nonwoven, hydro-entangled wiper made of 55% cellulose and 45% polyester and it is lighter weight than it's sister product, the C30 Wiper. See the PDF Specification for details. It is soft, absorbent and the material is low linting. The extractables are 0.010 for…
-
Laser-Sealed Polyester Wipers
ValutekValutek’s laser sealed polyester wiper is constructed from 100% continuous filament polyester in a double-knit, no-run, interlock pattern with a laser sealed edge. This wiper is an ultraclean and highly absorbent wiper with critically low levels of particulate and extractable counts.…
-
Amplitude™ Theta™ Wipes
ContecAmplitude™ EcoCloth™ This spunlaced wipe made of cellulose/polyester fabric features enhanced sorbency while being economical due to its light weight. Its sorbency exceeds comparable standard weight cellulose/polyester wipes. Ideal for wipe down of products prior to introduction…
-
Non-Woven 100% Cotton Cleanroom Wipers
FG Clean WipesThese wipes feature 100% pure, USA-grown cotton that is highly resistant to heat and compatible with a wide variety of solvents, solutions and cleaning chemicals. With extreme absorbency—up to six times the wipe weight—you can increase efficiency by using far less wipes. Recommended for…
-
AlphaWipe is constructed from 100% continuous-filament polyester in a double-knit, no-run interlock pattern. Cleanroom laundered and packaged, AlphaWipe is an ultraclean and highly sorbent wiper ideal for critical environments. AlphaWipe has a laundered cut edge. It exhibits low particle and fiber…
-
Non-sterile sponges can be used for applications where sterile gauze is not required Not made with natural rubber latex
-
TexWipe Wipers, 100% Cotton Twill
ITW TexwipeTexWipe is a strong, double-sided twill-pattern cotton wiper woven in a cross section of 118 x 60 threads per square inch. The product is manufactured with long staple cotton yarn to eliminate free-floating fibers on fabric surface. Features • 100% cotton • Bias cut and tight…
-
DURX® 770 Wipers
BerkshireDurx® 770 is ideal for critical small parts cleaning. It can be used for cleaning and maintenance in laboratories, aerospace, electronics, food processing, photo processing, and semiconductor, circuit board, pharmaceutical, and biomedical device manufacture. Durx® 770 is enhanced with…
-
PROSAT® Sterile™ Polynit Heatseal Vial Wipes are made from 100% knitted polyester presaturated with a blend of 70% IPA and purified water. The polyester wipe generates a low level of particles and fibers so is ideal for use in product contact areas, reducing the risk of product…
-
Microfiber Wiper, Foamtec, MiraWipe
Foamtec InternationalMaterial Microfiber Packs/Case 8 Quantity/Pack 150 Carton Dimensions 10 x 17 x 10 Weight 23 Size 9" x 9" Seal Wide Sealed Edge Cleanroom Environment Class 1…
-
FG Wiper, Cleanroom Polycellulose C1
FG Clean WipesC1 polyester cellulose wipes offer all the advantages of a traditional polycell nonwoven in a cleaner, softer and stronger package. From supporting processes to critical cleaning, these wipes are incredibly versatile. Recommended for ISO 5-8 critical…
-
Cleanroom Wipe, Cellulose/Polyester
United Scientific SuppliesSpunlace non-woven wipes are constructed from a hydroentangled, nonwoven blend of 55% cellulose and 45% polyester. This composite substrate has the highly absorbent properties of a natural fiber with the cleanliness and strength of a synthetic yarn. Recommended for use in cleanroom critical…
-
DURX® 670 Wipers
BerkshireSuperior strength and absorbency make Durx® 670 an ideal choice for a general purpose wiper. Manufactured without the use of binders or surfactants, ion levels and organic extractables remain low. Durx® 670 can be used for cleaning and maintenance in laboratories, aerospace, defense…
-
Hydroentangled 100% Polyester Wipes (C3)
FG Clean WipesThese 100% hydroentangled polyester wipes offer the highest level of softness and abrasion resistance—perfect for cleaning and polishing the most sensitive surfaces. But that softness does not come with a tradeoff for durability. These wipes are built tough for usage in a variety of…
-
The ACL Staticide® Low Lint Wipes economical all-purpose wipes are ideal for industrial labs. Soft and strong with remarkable absorbency, these low-particle wipes hold liquid without breaking down or causing lint contamination. This non-woven material uses no binders and has lower…
-
NOVA-COT™ Cotton Cleanroom Wipers
High Tech ConversionsNOVA-COT™ 100% cotton cleanroom wipes are woven from the highest grade cotton into a 2×1 twill construction. It is bleached, singed, and mercerized to remove virtually all impurities that are required to meet critical federal government and major semiconductor manufacturer…
-
Pharma-Wipe™
Acute CareNon-sterile 9" x 9" Polyester/cellulose Low endotoxin Dry wiper ISO Class 5 300 Bag x 12 Bags/Case - QTY 3600 Non-sterile 12" x 12" Polyester/cellulose Dry wiper ISO Class 5 150 Bag x 10 Bags/Case - QTY 1500 Non-sterile 4" x…
-
TekniClean ™ LX Polyester Knit Wipers Available in cleanliness levels for ISO 4 and higher cleanrooms with edge finishes suitable for a wide range of applications. TekniClean™ LX is made via an Ultra-Clean proprietary manufacturing process that reduces the potential for shedding…
-
TechniCloth wipers are fabricated from a hydroentangled, nonwoven blend of 55% cellulose and 45% polyester. This fabric blend combines the highly absorbent properties of a natural fiber with the cleanliness and strength of a synthetic wiper. With its low particle counts, low extractable levels and…
-
Wiper, M1 Class 100 Laundered, Standard Weight 100% Polyester Knit Fabric, Non…
M1 (a Thomas Scientific Brand) -
TekniMax ™ DX Nonwoven Microfiber Designed for frequent use on transparent or sensitive surfaces, TekniMax™ DX restores cleanliness by removing haze, fine particles, or oily residue build-up in a single swipe. APPLICATIONS Optics & Sensor Cleaning Polishing…
-
TekniClean ™ LX Polyester Knit Wipers Available in cleanliness levels for ISO 4 and higher cleanrooms with edge finishes suitable for a wide range of applications. TekniClean™ LX is made via an Ultra-Clean proprietary manufacturing process that reduces the potential for shedding…
-
TekniMax ™ LX Mixed-Weave Microfiber Light-weight and conformable, TekniMax™ LX utilizes a mixed weaving pattern to create multi-directional, high surface area contact to thoroughly remove a range of contaminates. From fine, nearly invisible particles and fluids to oily residues…
-
Super Polx® 1200 Wipers
BerkshireBerkshire Super Polx® 1200 is a knife-cut, cleanroom laundered wipe recommended for controlled environments rated ISO Class 4 and above. It is composed of 100% continuous filament polyester knit fabric. This combination of properties provides Super Polx® 1200 with high level of cleanliness,…
-
M1-C30 Nonwoven Polyester/Cellulose Wiper
M1 (a Thomas Scientific Brand)M1 cleanroom wipes are made from a hydroentangled blend of 55% cellulose / 45% polyester. This creates a strong, clean, and very absorbant wipe for liquid removal or lint free wiping of surfaces for contamination removal. This nonwoven wipe exhibits lower particle and fiber release than other…
-
NOVA-TECH™ Lint Free Nonwoven Cleanroom Wipes
High Tech ConversionsNOVA-TECH™ Lint Free Wipes are a popular general purpose non-woven wipe comprised of blended cellulose and polyester. They are tough, abrasion resistant, absorbent, and virtually free of particle generation. The synergistic blend of virgin polyester and cellulose is hydro-entangled into a…
-
Polynit Wipes
ContecThe Polynit Wipe is made from filament polyester and is knitted in a special stitch which reduces degradation of the wipe and subsequent particle generation. The Polynit Wipe is specifically designed for ISO Class 5 or cleaner environments and is exceptionally low in particles and extractable…
-
M1 Quilted Polyester Sealed Edge Wiper
M1 (a Thomas Scientific Brand)M1 polyester knit wipes are made with a hi strength continuous filament polyester yarn in a double knit, no run interlock pattern. A unique quilting pattern is used in the 2-ply polyester wipes for optimum contamination & liquid holding capacity, resulting in the most absorbent, clean &…
-
The ACL Staticide® Microfiber Wipe is an excellent choice for critical task cleaning. Having four times the filaments of ordinary microfiber wipes, this hydro-entangled split microfiber offers superior pick-up and removal of contaminants. Whether used for wet or dry applications, the…
-
TekniZorb™ LX Polycellulose Versatile, absorbent, and low shedding, TekniZorb™ LX offers the performance needed to restore your controlled environment to its required cleanliness. APPLICATIONS Benchtop liner Product storage solution Spill management Plenum…