Bottle, Plastic, Chemicals, 25 g
-
Cholic acid, 98%
BeanTown ChemicalCAS: 81-25-4 EC No: 201-337-8 MDL No: MFCD00003672 RTECS: FZ9350000 Powder Molecular Formula: C24H40O5 MW: 408.57 Melting Point: 200-201°
-
Cobalt(III) fluoride, 99%
BeanTown ChemicalCAS: 10026-18-3 EC No: 233-062-4 MDL No: MFCD00010942 UN No: UN3085; Haz Class: 5.1 (8); Packing Group: III Powder Molecular Formula: CoF3 MW: 115.93 Density (g/mL): 3.88
-
Dibenzyldithiocarbamic acid zinc salt
BeanTown ChemicalCAS: 14726-36-4 EC No: 238-778-0 MDL No: MFCD00014470 Powder Molecular Formula: C30H28N2S4Zn MW: 610.21 Melting Point: 183-188° Boiling Point: 330° Density (g/mL): 1.420
-
Iron(II,III) oxide, 98% trace metals basis
BeanTown ChemicalCAS: 1317-61-9 EC No: 215-277-5 MDL No: MFCD00011010 20-30nm APS Powder Molecular Formula: Fe3O4 MW: 231.54 Melting Point: 1538° Density (g/mL): 5.2
-
Silicon(IV) oxide, 99.99% trace metals basis
BeanTown ChemicalCAS: 7631-86-9 EC No: 231-545-4 MDL No: MFCD00011232 1-3mm Fused Lump Linear Formula: SiO2 MW: 60.08 Melting Point: 1610° Boiling Point: 2230° Density (g/mL): 2.2-2.6 Refractive Index: 1.544
-
AlbumiNZ™ Low Endo BSA
MP BiomedicalsBovine albumin is a single polypeptide chain consisting of approximately 583 to 595 amino acid residues and no carbohydrates. At pH 5-7 it contains 17 intrachain disulfide bridges and 1 sulfhydryl group. Albumin binds water, Ca2+, Na+, and K+. Due to a hydrophobic cleft, albumin binds fatty…
-
Boric Acid
MP BiomedicalsBoric acid has a single boron; its salt forms complex equilibria in solution, with the ion B4O7-2 being the predominant species. Boric acid is used for weatherproofing wood and fireproofing fabrics; as a preservative; manufacturing of cements, crockery, porcelain, enamels, glass, borates,…
-
Copper slug, 6.35mm dia. x 6.35mm length, 99.995% trace metals basis
BeanTown ChemicalCAS: 7440-50-8 EC No: 231-159-6 MDL No: MFCD00010965 Solid Molecular Formula: Cu MW: 63.55 Melting Point: 1083.4° Boiling Point: 2567° Density (g/mL): 8.94
-
L-Cysteine Hydrochloride Monohydrate
MP BiomedicalsL-Cysteine hydrochloride monohydrate (LCHCMH) is a water soluble salt of the non-essential amino acid, L-cysteine. Widely employed in the medicine industry Thermodynamic features of a solution of LCHCMH in water have been reported NMDA glutamatergic receptor antagonist L-Cysteine…
-
4-Amino-benzenesulfonic acid monosodium salt
BeanTown ChemicalCAS: 515-74-2 EC No: 208-208-5 MDL No: MFCD00064394 Solid Linear Formula: H2NC6H4SO3Na MW: 195.17
-
Lithium cobaltite, 99.5% trace metals basis
BeanTown ChemicalCAS: 12190-79-3 EC No: 235-362-0 MDL No: MFCD00049786 5 Micron APS Powder Linear Formula: LiCoO2 MW: 97.88
-
Tantalum(V) oxide, 99.85% trace metals basis
BeanTown ChemicalCAS: 1314-61-0 EC No: 215-238-2 MDL No: MFCD00011254 -325 Mesh Powder Linear Formula: Ta2O5 MW: 441.89 Melting Point: 1800° Density (g/mL): 8.2
-
Vanadium(V) trifluoride oxide, 99%
BeanTown ChemicalCAS: 13709-31-4 EC No: 237-250-7 MDL No: MFCD00042555 UN No: UN3290; Haz Class: 6.1 (8); Packing Group: II Powder Linear Formula: VOF3 MW: 123.94 Melting Point: 300°
-
4-Nitrobenzamide, 98%
BeanTown ChemicalCAS: 619-80-7 EC No: 210-613-7 MDL No: MFCD00007994 RTECS: CV5601000 Solid Molecular Formula: C7H6N2O3 MW: 166.13 Melting Point: 199-201°
-
1,3-Di-o-tolylguanidine, 99%
BeanTown ChemicalCAS: 97-39-2 EC No: 202-577-6 MDL No: MFCD00008513 RTECS: MF1400000 UN No: UN2811; Haz Class: 6.1; Packing Group: III Solid Molecular Formula: C15H17N3 MW: 239.32 Melting Point: 176-178°
-
Triethylamine trihydrofluoride
BeanTown ChemicalCAS: 73602-61-6 EC No: 277-550-5 MDL No: MFCD00043294 UN No: UN1790; Haz Class: 8 (6.1); Packing Group: II Liquid Linear Formula: (CH3CH2)3N·3HF MW: 161.21 Melting Point: -29° Boiling Point: 70°/15 mmHg Flash Point: 87°C…
-
Thymidine, 99%
BeanTown ChemicalCAS: 50-89-5 EC No: 200-070-4 MDL No: MFCD00006537 RTECS: XP2071000 Powder Molecular Formula: C10H14N2O5 MW: 242.23 Melting Point: 186-188°
-
Bis-Tris
MP BiomedicalsBis-Tris is a zwitterionic buffer; an amine buffer similar to Tris Hydrochloric acid that exhibits only a very small shift in dissociation constant with respect to temperature. It is structurally analogous to the the Good buffers that were developed to provide buffers in the pH range of 6.15 - 8.35…
-
Sodium Dodecyl Sulfate
MP BiomedicalsSDS is an anionic detergent and wetting agent that is effective in both acid and alkaline solutions. Most proteins bind SDS in a ratio of 1.4 grams SDS to 1 gram protein. The charges intrinsic to the protein become insignificant compared to the overall negative charge provided by the bound SDS. The…
-
Sodium hydroxide, pellets, 99.99% trace metals basis
BeanTown ChemicalCAS: 1310-73-2 EC No: 215-185-5 MDL No: MFCD00003548 RTECS: WB4900000 UN No: UN1823; Haz Class: 8; Packing Group: II Pellets Linear Formula: NaOH MW: 40.00 Melting Point: 318° Boiling Point: 1390° Density (g/mL): 2.13
-
Tantalum(V) oxide, 99.5% trace metals basis
BeanTown ChemicalCAS: 1314-61-0 EC No: 215-238-2 MDL No: MFCD00011254 Powder Linear Formula: Ta2O5 MW: 441.89 Melting Point: 1800° Density (g/mL): 8.2
-
L-(+)-Ascorbic acid, ACS, 99.0% min.
BeanTown ChemicalCAS: 50-81-7 EC No: 200-066-2 MDL No: MFCD00064328 RTECS: CI7650000 Powder Molecular Formula: C6H8O6 MW: 176.12 Melting Point: 190-194° (decomposes) Optical Rotation: [α]25/D +20.5 to +21.5°, in water
-
Quinhydrone, 97%
BeanTown ChemicalCAS: 106-34-3 EC No: 203-387-6 MDL No: MFCD00010310 RTECS: VA4550000 UN No: UN2811; Haz Class: 6.1; Packing Group: III Crystalline Molecular Formula: C12H10O4 MW: 218.21 Melting Point: 167-172° Density (g/mL): 1.4
-
Deoxycholic Acid Sodium Salt Monohydrate
MP BiomedicalsDeoxycholic Acid Sodium Salt Monohydrate is an anionic biological detergent for the solubilization of membrane-bound proteins. Anionic detergent; useful for extraction of membrane receptors and other plasma membrane proteins and for nuclei isolation. Deoxycholic acid has been used in a modified…
-
Benzoic acid, ACS, 99.5% min.
BeanTown ChemicalCAS: 65-85-0 EC No: 200-618-2 MDL No: MFCD00002398 RTECS: DG0875000 Crystalline Linear Formula: C6H5CO2H MW: 122.12 Melting Point: 121-125° Boiling Point: 249° Flash Point: 121°C (250°F)
-
PIPES
MP BiomedicalsPIPES is a zwitterionic N-substituted aminosulfonic acid "Good" buffer. PIPES is used to buffer glutaraldehyde fixative solutions when fixing plant and/or animal tissue samples. This will help prevent the loss of lipids. It is also used to buffer glutaraldehyde and formaldehyde when…
-
Cerium(IV) oxide, 99.9% trace rare earth metals basis
BeanTown ChemicalCAS: 1306-38-3 EC No: 215-150-4 MDL No: MFCD00010933 RTECS: FK6310000 50-105nm APS Powder Molecular Formula: CeO2 MW: 172.12 Density (g/mL): 7.13
-
Magnesium oxide, 99% trace metals basis
BeanTown ChemicalCAS: 1309-48-4 EC No: 215-171-9 MDL No: MFCD00011109 40-60nm APS Powder, S.A. 30-40 m2/g Molecular Formula: MgO MW: 40.30 Melting Point: 2852° Boiling Point: 3600° Density (g/mL): 3.58 Refractive Index: 1.736
-
Humic acid
BeanTown ChemicalCAS: 1415-93-6 EC No: 215-809-6 MDL No: MFCD00147177 RTECS: MT6544000 Crystalline/Powder
-
3-Aminopropionitrile, 98%, stabilized
BeanTown ChemicalCAS: 151-18-8 EC No: 205-786-0 MDL No: MFCD00014820 RTECS: UG0350000 UN No: UN2735; Haz Class: 8; Packing Group: III Liquid Molecular Formula: C3H6N2 MW: 70.10 Density (g/mL): 0.952
-
Lidocaine hydrochloride monohydrate
BeanTown ChemicalCAS: 6108-05-0 EC No: 200-803-8 MDL No: MFCD00150329 RTECS: AN7700000 UN No: UN2811; Haz Class: 6.1; Packing Group: III Crystalline/Powder Molecular Formula: C14H22N2O·HCl·H2O MW: 288.82
-
Erbium(III) oxide, 99.99% trace rare earth metals basis
BeanTown ChemicalCAS: 12061-16-4 EC No: 235-045-7 MDL No: MFCD00010991 <20 Micron Powder Molecular Formula: Er2O3 MW: 382.56 Density (g/mL): 8.64