10 L, Solutions
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
The LabChem 1.0N hydrochloric acid in liquid form, is soluble in water, ethanol and methanol. It is non-flammable and has odorless odor. Application: For Laboratory and Manufacturing Use Only
-
ISOPROPYL ALCOHOL 70% V/V
LabchemCAS Number: 67-63-0 Shelf Life (Months): 24 Traceable to NIST: No Refrigerated?: No DEA Registration Required?: No Hazard?: Yes Hazard Class: 3 Hazard Subrisk: (none specified) UN Number: UN1219 Packaging Group: P.G.II Compendia References: (none specified)
-
The LabChem 1.0N sodium hydroxide in liquid form, is non-flammable and odorless. Application: For Laboratory and Manufacturing Use Only
-
Silver Nitrate, 0.10N
chemForce® (powered by Thomas Scientific)Harmonized #: 2843.21.0000 0000 Shelf Life (months): 24 Specific Gravity: 1.01 DOT: Not regulated Appearance: Colorless Physical State: Liquid Flash Point: Not applicable Solubility: Miscible Storage Temperature: Ambient Storage Code: General
-
Ricca Surface Cleaning Solutions
Ricca ChemicalThis product is intended for laboratory cleaning and disinfection purposes and is typically used for disinfection of surfaces. All components of this product are filtered as part of the manufacturing process. The residue after evaporation is typically 0.001% (10 ppm) maximum at the time of…
-
The LabChem 0.02N sulfuric acid in liquid form, is soluble in water. it is perfect for all laboratory use. Application: For Laboratory and Manufacturing Use Only
-
LabChem Reagent Alcohol
LabchemThe LabChem reagent alcohol in liquid form, is soluble in water, ether, aceton, chloroform, oils/fats, methanol and acids. It is highly flammable in liquid as well as vapor and has alcohol/pleasant odor. Application: For Laboratory and Manufacturing Use Only
-
Ricca 30% (w/v) Potassium Hydroxide
Ricca ChemicalPotassium Hydroxide is a strong base in terms of chemical ionization and solutions of it can be assayed using a strong acid, such as Hydrochloric Acid or Sulfuric Acid, or by using an acidimetric standard such as Potassium Hydrogen Phthalate (KHP).
-
LabChem 7 pH Buffer Solution
LabchemThe LabChem 7 pH buffer solution in liquid form, is soluble in water. it is perfect for all laboratory use. Application: For Laboratory and Manufacturing Use Only
-
Sodium Thiosulfate, 0.10N, Standardized
Reagents®Concentration: 0.1N Composition: Water 97.40%, Sodium Thiosulfate Pentahydrate 2.46%, Proprietary 0.09%, Sodium Carbonate 0.05% Boiling Point: Approximately 100°C Density: 1.01 Melting Point: Approximately 0°C Color: Colorless liquid Physical State: Liquid pH Range: 6 to 8.4 …
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
-
Ricca Saturated Potassium Chloride, Approximately 4 Molar
Ricca ChemicalPotassium chloride is a metal halide salt composed of potassium and chlorine. It is odorless and has a white or colorless vitreous crystal appearance. The solid dissolves readily in water, and its solutions have a salt-like taste. Potassium chloride can be obtained from ancient dried lake deposits.
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
The LabChem 0.1M ethylenediaminetetraacetic acid in liquid form, is soluble in water. It is non-flammable and has odorless odor. Application: For Laboratory and Manufacturing Use Only
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
Ricca 0.01 N Silver Nitrate
Ricca ChemicalSilver Nitrate solutions are used almost exclusively for the determination of Halides, i.e., Chloride, Bromide and Iodide. Silver Nitrate solutions can be standardized potentiometrically, or by using the Mohr method or the Volhard method.
-
The LabChem 0.1N potassium permanganate in liquid form, is soluble in water. Application: For Laboratory and Manufacturing Use Only
-
Silver Nitrate 0.1N
ExaxolThe Exaxol 0.1 N silver nitrate is an inorganic chemical compound which acts as an antibacterial agent. It is used to treat skin infections around wounds and burns. Silver nitrate is used in analytical chemistry experiments. It is tested at ISO 17025 accredited laboratory. Application: For…
-
The LabChem 0.1N silver nitrate in liquid form, is soluble in water. It is non-flammable and has odorless odor. Application: For Laboratory and Manufacturing Use Only
-
Hyamine Solution, 0.004M, Standardized
Reagents®Concentration: 0.004M (N) Composition: Water 99.82%, Benzethonium Chloride 0.18% Boiling Point: Approximately 100°C Density: 1 Melting Point: Approximately 0°C Color: Colorless liquid Physical State: Liquid Solubility Information: Miscible Synonyms: Hyamine 1622 Shelf Life: 24…
-
Sodium molybdate, Na2MoO4, is useful as a source of molybdenum. This white, crystalline salt is often found as the dihydrate, Na2MoO4·2H2O. The molybdate(VI) anion is tetrahedral. Two sodium cations coordinate with every one anion.
-
The LabChem 0.2N potassium permanganate in liquid form, is soluble in water. Application: For Laboratory and Manufacturing Use Only
-
Sodium Thiosulfate, 0.010N, Standardized
Reagents®Concentration: 0.01N Composition: Water 99.65%, Sodium Thiosulfate Pentahydrate 0.25%, Proprietary 0.05%, Sodium Carbonate 0.05% Boiling Point: 100°C Density: 1 Melting Point: 0.0°C Color: Colorless liquid Physical State: Liquid pH Range: 6 to 8.4 Solubility Information: Miscible …
-
Titriplex® Solution B
MilliporeSigmaSolubility (20 °C) soluble Density 1.00 g/cm 3 (20 °C) Density 7.5 (H2O, 20 °C)
-
-
The LabChem 0.5N sodium hydroxide in liquid form, is non-flammable and odorless. Application: For Laboratory and Manufacturing Use Only
-
Hydrochloric Acid, 0.5N (0.5M)
LabchemCAS Number: 7647-01-0 Shelf Life (Months): 24 Traceable to NIST: Yes Hazard?: Yes Hazard Class: 8 Hazard Subrisk: None Specified UN Number: UN1789 Packaging Group: P.G.II Compendia References: None Specified
-
Sodium Thiosulfate, 0.20N, Standardized
Reagents®Concentration: 0.2N Composition: Water 95.02%, Sodium Thiosulfate Pentahydrate 4.84%, Proprietary 0.09%, Sodium Carbonate 0.05% Boiling Point: Approximately 100°C Density: 1.03 Melting Point: Approximately 0°C Color: Colorless liquid Physical State: Liquid pH Range: 6 to 8.4 …
-
TitriPUR® Sodium hydroxide solution
MilliporeSigmaMolecular Formula: HNaO Molecular Weight: 40.0 Linear Structural Formula: NaOH MDL Number: MFCD00003548 Density: 1.02 g/cm3 at 20 C Legal Information: Titripur is a registered trademark of Merck KGaA, Darmstadt, Germany
-
The LabChem 0.1N sodium thiosulfate in liquid form, is miscible with water. Application: For Laboratory and Manufacturing Use Only