Polypropylene, Bottles
-
Replacement polypropylene open top closures have a bonded-in 0.045” thick septa except for 1709B03, which is a 24-414 open top closure without septa. Choose an I-CHEM® 0.125” thick, 22 mm, PTFE silicone replacement septum to complete the closure system. Thin septa are also available.
-
GL 45 Media Storage Bottle Caps
DWK Life Sciences (Kimble)Caps are designed to fit GL 45 threaded ware. Autoclavable Solid top polypropylene Cap colors available in blue, white, orange, gray, green, or pink High-temperature version with red cap available
-
Test Tube Slant Racks
Thermo Scientific NalgeneIncubate liquid cultures on a slant using Thermo Scientific™ Nalgene™ Test Tube Slant Racks. Slant racks allow 5 or 20 degree tilt to allow media to harden at an angle for incubating liquid cultures. These racks are keyed with numbers and letters for easy identification and are…
-
PPCO Centrifuge Bottles
Thermo Scientific NalgenePerform biopharmaceutical aseptic fluid transfer or sampling applications with the tri-clover flange of Thermo Scientific™ Nalgene™ PPCO Centrifuge Bottles, molded of transparent polypropylene copolymer. Ideal for large-volume cell harvesting, pelleting and protein purification, these…
-
Polypropylene Test Tube Racks
BrandTech®Polypropylene racks snap together for easy assembly, sturdy construction, stackable, and are available in four colors. Will not float in waterbath. Alphanumerical positions for clear sample identification. Wide spaces between positions. Operating temperature -20 to 90°C. Autoclavable at 121°C.
-
Scienceware® Hydrometer Racks
SP Bel-ArtPolypropylene racks Top and middle plates have 25 mm diameter holes; bottom plate has wells tapering from 25 to 9 mm to hold hydrometer bulb Overall height is 251 mm Steam autoclavable at 121°C 6040A10 has top plate of 143 mm high for short hydrometers
-
-
Narrow Mouth and Wide Mouth Bottle Replacement Closures
Thermo Scientific NalgeneFit Thermo Scientific™ Nalgene™ Narrow Mouth and Wide Mouth Bottle Replacement Closures onto Nalgene narrow mouth and wide mouth bottles.
-
Open-Top Polypropylene Screw Thread Closures with Red
Chase ScientificConvenient assembly of caps and liners Available with standard or pre-slit septa Autoclavable and used for multiple injections
-
Closure / Stem / Drwtube, 24mm
Thermo Scientific NalgeneStem & Draw Tube Closure Applicable with Nalge # 2401-0125 & 2401-0250
-
CryoSure® & MST™ Vial Processing Racks
Caplugs Evergreen®Racks are designed for our CryoSure® vials & MST™ tubes, holding up to fifty vials/tubes in alpha-numerically labeled holes. The racks are autoclavable and stackable. Tubes and vials sold separately.
-
58-400 Redi-Cap, PP White, Fmd PE Liner
DWK Life Sciences (Wheaton)Use these caps with WHEATON or other manufacturers# glass bottles or vials White polypropylene screw cap provides clear surface for writing on cap Foamed polyethylene liner provides chemical resistance for acids, alkalis, solvents, alcohols, oils, household cosmetics and aqueous products …
-
Scienceware® Microtube Rack
SP Bel-ArtRound-holed Stackable, autoclavable White, polypropylene rack takes 72 centrifuge tubes in 6 rows of 12. Molded cutouts in end panels form handles. 2591C58 and C60 hold 400-500 µL tubes and are 9” L x 4 3/8” W x 4 3/8” H. 2591C62 and C64 hold 1.5 mL tubes and are…
-
Closure 18-415 0
DWK Life Sciences (Kimble)Closure of one-piece construction with a seal achieved due to a unique inner sealing ring. Intended for use with 73750, 73760 and 73770 disposable culture tubes and 73785 disposable centrifuge tubes. Natural polypropylene Autoclavable Designed from ASTM Specification E982
-
20-410 Dropper Tip Caps
DWK Life Sciences (Wheaton)Screw cap made of radiation grade polypropylene Variety of colors Packaged in case of 100 or 1000
-
Cap w / Strap 53mm F / Jerricans
Thermo Scientific NalgeneJerrican Cap with Strap 53mm screw thread
-
Polypropylene Dilution Bottles
Thermo Scientific NalgeneResistant to strong acids, alcohols and bases Nalge 2505 Autoclavable Polypropylene screw cap without liner Contact-clear bottles are graduated at 90 mL and 99 mL , accurate to 4 mL . Polypropylene copolymer, polypropylene screw closure. Temperature range -40 to 121°C…
-
Polypropylene Open-Top Screw Caps
DWK Life Sciences (Wheaton)Bonded Teflon®-Faced Silicone Liners White autoclavable open-top caps have a bonded Teflon-Faced Silicone Liner making them ideal for storage and retrieval of volatile solvents, sensitive compounds and corrosive chemicals. The liners consist of 0.055” of Silicone and 0.005” of…
-
No-Wire Test Tube Grip Racks
SP Bel-ArtTest Tubes ‘Hang in There’ in Any Position, Even Inverted! Retainer fingers hold tubes firmly in the rack plates with no fear of dislodging, making them perfect for both decanting and water bath work. • Fingers allow simultaneous decanting to save valuable…
-
Blue Threaded Luer Lock Hub; 22 gauge 1.25 inch High Precision Taper Tip- id inch:0.017(0.420mm) polypropylene plastic threaded tapered dispensing tip.
-
Microcentrifuge Tube Racks
Caplugs Evergreen®Microcentrifuge tube racks are reversible 96-well racks that hold tubes in an 8 × 12 format. One side of the reversible rack holds 96 1.5 mL, 1.8 mL or 2.0 mL microcentrifuge tubes while the other side holds 96 0.5 mL tubes. Autoclavable racks are alpha-numerically…
-
Polyporpylene Standard tapered stems Steam autoclavable at 121°C (250°F)
-
Colored Polypropylene Caps
DWK Life Sciences (Wheaton)Inner seal ring 45 mm size Caps have built-in, wedge-shaped sealing ring, eliminating the need for a liner. Use with Wheaton Lab 45® media bottles.
-
Centrifuge Bottles With Sealing Cap
Thermo Scientific NalgeneIdeal for bacterial, yeast and tissue isolations True one liter volume Autoclavable Excellent clarity and mechanical strength Non-cytotoxic USP class IV Recommended operating temperature: 4 to 22°C Storage to -70°C Leakproof up to 15,810 x g
-
Polypropylene Screw Closures
Thermo Scientific NalgeneLinerless closures are for use only with NALGENE narrow- and wide-mouth bottles and Erlenmeyer flasks Autoclavable Available in natural and amber
-
PPCO Centrifuge Bottles with Sealing Closure
Thermo Scientific NalgeneCentrifugalize low- to moderate-speed large-volume biological and chemical samples with Thermo Scientific™ Nalgene™ PPCO Centrifuge Bottles, which include a sealing closure for added leakproof assurance at maximum speeds for when spinning hazardous materials. Molded of rigid and robust…
-
Constructed of a special blend of polypropylene, these autoclavable racks will sink in a water bath Interlocking feet allow racks to be stacked while not in use Racks feature end plates for labeling. Rows are numbered and lettered for tube identification. Outside dimensions: 9.7” x…
-
Interlocking 20-Place Tube Racks
Heathrow ScientificAttach several racks for large experiments Heavy polypropylene construction Glove friendly Hold 1.5/2.0 mL tubes Racks slide together on both sides. Internal ribbing make racks stable and sturdy. The “Hold-It” finger slot on the front of the racks allows racks to…
-
Unwire Polypropylene Test Tube Peg Racks
Thermo Scientific NalgeneAutoclavable Consists of an array of pegs spaced to hold tubes while allowing full view of contents Pegs convenient for holding inverted tubes for drying When racks are inverted, ribs keep tubes off base to allow drainage through holes 9260B01 and B13 are 13 mm with an array of 8 x…
-
Scienceware® Stack Rack® Test Tube Racks
SP Bel-ArtMatch Rack Material to Lab Use These sturdy, rigid racks feature interlocking end plates with handles for secure stacking when loaded with tubes up to 10cm (4") long. Rows are numbered and lettered for easy tube identification. All racks are steam autoclavable at 121°C (250°F). …
-
Polypropylene Racks for 12mm and 16mm OD Vials
DWK Life Sciences (Kimble)Disposable polypropylene vial rack Lettered and numbered for indexing individual tubes Corners interlock for convenient stacking