Polypropylene, Bottles
-
MCT/PCR Rack
SP Bel-ArtPerfect for benchtop use or freezer storage, this compact, double-sided polypropylene rack accommodates 0.2ml thin-walled PCR tubes on one side while the opposite side holds 1.5ml to 2.0ml microcentrifuge tubes. 80 wells on each side keep tubes upright in a 5 x 16 array and are numbered for …
-
PPCO Centrifuge Bottles with Sealing Closure
Thermo Scientific NalgeneCentrifugalize low- to moderate-speed large-volume biological and chemical samples with Thermo Scientific™ Nalgene™ PPCO Centrifuge Bottles, which include a sealing closure for added leakproof assurance at maximum speeds for when spinning hazardous materials. Molded of rigid and robust…
-
Polypropylene Screw Closures
Thermo Scientific Nalgene1228A16, A17 and A25 are for use only with NALGENE narrow- and wide-mouth bottles and Erlenmeyer flasks 1228A27 is for use with carboys Autoclavable Available in natural and amber
-
Unwire Polypropylene Test Tube Peg Racks
Thermo Scientific NalgeneAutoclavable Consists of an array of pegs spaced to hold tubes while allowing full view of contents Pegs convenient for holding inverted tubes for drying When racks are inverted, ribs keep tubes off base to allow drainage through holes 9260B01 and B13 are 13 mm with an array of 8 x…
-
Centrifuge Bottles With Sealing Cap
Thermo Scientific NalgeneIdeal for bacterial, yeast and tissue isolations True one liter volume Autoclavable Excellent clarity and mechanical strength Non-cytotoxic USP class IV Recommended operating temperature: 4 to 22°C Storage to -70°C Leakproof up to 15,810 x g
-
-
Test Tube Slant Racks
Thermo Scientific NalgeneIncubate liquid cultures on a slant using Thermo Scientific™ Nalgene™ Test Tube Slant Racks. Slant racks allow 5 or 20 degree tilt to allow media to harden at an angle for incubating liquid cultures. These racks are keyed with numbers and letters for easy identification and are…
-
Polypropylene Test Tube Racks
BrandTech®Polypropylene racks snap together for easy assembly, sturdy construction, stackable, and are available in four colors. Will not float in waterbath. Alphanumerical positions for clear sample identification. Wide spaces between positions. Operating temperature -20 to 90°C. Autoclavable at 121°C.
-
White Polypropylene Cap With Poly-Vinyl Liner
DWK Life Sciences (Wheaton)Suitable for a wide range of applications Excellent moisture barrier Good for mild acids, alkalis, solvents, alcohols, oil and aqueous products Cap liner consists of one mil poly vinyl film bonded to one mil HDPE on a #30 white pulp paper backing. Superior to plain pulp paper because…
-
Scienceware® Round Bottom Flask Support
SP Bel-ArtRound-bottom flasks of any size up to 10 liters are cradled securely in the stepped concentric rings of this holder. Can be stacked together for convenient storage Polypropylene plastic rack; not affected by spilled acids, alkalis or other corrosive liquids Steam autoclavable at…
-
Narrow Mouth and Wide Mouth Bottle Replacement Closures
Thermo Scientific NalgeneFit Thermo Scientific™ Nalgene™ Narrow Mouth and Wide Mouth Bottle Replacement Closures onto Nalgene narrow mouth and wide mouth bottles.
-
Open-Top Polypropylene Screw Thread Closures with Red
Chase ScientificConvenient assembly of caps and liners Available with standard or pre-slit septa Autoclavable and used for multiple injections
-
Scienceware® Vacuum Aspirator Bottle
SP Bel-ArtThe Vacuum Bottle Trap is a useful tool for easy and continuous liquid aspiration with vacuum when aspirating tissue culture media, wash solutions, supernatant fluids after centrifugation, chemical waste, etc. The Aspirator Bottle safely retains up to 1600 mL (54 oz) of fluids while the…
-
No-Wire Test Tube Grip Racks
SP Bel-ArtTest Tubes ‘Hang in There’ in Any Position, Even Inverted! Retainer fingers hold tubes firmly in the rack plates with no fear of dislodging, making them perfect for both decanting and water bath work. • Fingers allow simultaneous decanting to save valuable…
-
Dispenser packs of non-sterile syringes make sense. They're more economical and easier on the environment. Available in both luer slip and luer lock styles. Convenient dispenser cartons Reduced waste No wrappers to remove Require less storage space These all polypropylene…
-
Full-View Test Tube Supports
SP Bel-ArtHold More Tubes, Waste Less Space This versatile polypropylene rack has pins for supporting or draining test tubes. Stores test tubes upright, full or empty Holds inverted test tubes over pins for draining The rack with 102 pins, 5 x 16 rows (9259G50), is excellent for drying…
-
Bulk White Closures
I-ChemLDPE foam-lined white polypropylene cap Bottles sold separately: 013-series and 012-series Recommended for general purpose sampling where cleaning and certification is not required, or ready for your own cleaning and certification procedures Economically bulk packed Includes:…
-
Cap w / Strap 53mm F / Jerricans
Thermo Scientific NalgeneJerrican Cap with Strap 53mm screw thread
-
White Polypropylene Screw Caps
DWK Life Sciences (Wheaton)Bonded Teflon®-faced silicone liners White, autoclavable caps have a bonded Teflon-Faced Silicone Liner making them suitable for storage and containment of volatile solvents, sensitive compounds and corrosive chemicals. The liners consist of 0.055” of Silicone and 0.005”…
-
Polypropylene Dilution Bottles
Thermo Scientific NalgeneResistant to strong acids, alcohols and bases Nalge 2505 Autoclavable Polypropylene screw cap without liner Contact-clear bottles are graduated at 90 mL and 99 mL , accurate to 4 mL . Polypropylene copolymer, polypropylene screw closure. Temperature range -40 to 121°C…
-
Polyporpylene Standard tapered stems Steam autoclavable at 121°C (250°F)
-
Closure 15-415 0
DWK Life Sciences (Kimble)Closed top, linerless screw thread caps. Made of Polypropylene Economical, one-piece construction Unique design provides exceptional sealing properties Color: Natural GPI finish: 15-415 Autoclavable
-
Polypropylene Open-Top Screw Caps
DWK Life Sciences (Wheaton)Bonded Teflon®-Faced Silicone Liners White autoclavable open-top caps have a bonded Teflon-Faced Silicone Liner making them ideal for storage and retrieval of volatile solvents, sensitive compounds and corrosive chemicals. The liners consist of 0.055” of Silicone and 0.005” of…
-
ThermalSeal® A™ Sealing Films for PCR and Storage
Excel ScientificThermalSeal® A™ sealing films are an advanced version of Excel Scientific's classic ThermalSeal® sealing films for PCR. ThermalSeal A films consist of 50 µm polyester film with a 41 µm layer of acrylic adhesive formulated for improved protection against…
-
Closure Stem + Drawtube 28mm
Thermo Scientific NalgeneStem & Draw Tube Closure Applicable with Nalge # 2401-0030, 2401-0060 & 2401-0500
-
Microcentrifuge Tube Racks
Caplugs Evergreen®Microcentrifuge tube racks are reversible 96-well racks that hold tubes in an 8 × 12 format. One side of the reversible rack holds 96 1.5 mL, 1.8 mL or 2.0 mL microcentrifuge tubes while the other side holds 96 0.5 mL tubes. Autoclavable racks are alpha-numerically…
-
-
Replacement closed-top polypropylene closures and PTFE liners are sold separately and unassembled except for 1709B73, which is a 24-414 size that comes with a bonded-in PTFE-lined silicone liner.
-
Closure / Stem / Drwtube, 24mm
Thermo Scientific NalgeneStem & Draw Tube Closure Applicable with Nalge # 2401-0125 & 2401-0250
-
The Flipper microtube rack is designed to hold either 96 0.5 mL or 96 1.5/2.0 mL style microcentrifuge tubes. Rack is reversible with one side suitable for larger tubes and the other side for smaller tubes. The Flipper is fitted with a clear polypropylene lid and both sides are labeled in…