Glass, Flasks
-
Flask 50ml
DWK Life Sciences (Kimble)Kontes™ flask with three angle necks for heating, stirring and solvent stripping without impairing ease of liquid and solid transfer. Three-neck heavy wall round-bottom flask with Standard Taper outer joints Side necks are angled Manufactured from 33 expansion, low extractable…
-
The strength of these flasks has been increased appreciably through machine-blown bodies. Sealed, heavy-beaded, heavy-tubing necks are tooled for snap-cap fit. Graduation line is sharp, permanent and large; white block letters make the inscription easy to read. 1 mL and 2 mL sizes are…
-
6513C60 stopper was traditionally offered by Thomas for 300/500 mL combustion flasks; glass tip extends 50 mm below ground joint 6513C65 stopper is used for 1,000 mL combustion flasks; glass tip extends 90 mm below ground joint All feature U-shaped platinum gauze with 3 mm opening for insertion…
-
PYREX VISTA flat bottom boiling flasks have full length outer 24/40 Standard Taper joints, but with shorter necks. Wall thicknesses are controlled to provide balance between thermal expansion and mechanical strength for greater shock resistance. The flat bottom boiling flasks are designed to ASTM E-1403.
-
With barrel-shaped Standard Taper glass stopper Calibrated to contain at 20°C
-
PYREX® VISTA volumetric flasks provide precise volume measurement. The necks are tooled for Standard Taper glass stoppers. The graduation line is sharp and permanent and large blue block letters make the inscription easy to read. The 1 mL and 2 mL sizes are test tube shaped. These Class A…
-
For user convenience, PYREX Erlenmeyer flasks are graduated to show approximate capacity. The 25- 50- and 125 mL flasks are satisfactory for use as a weighing bottle. Erlenmeyer flasks come with a PYREX Standard Taper stopper.
-
Thomas Ogg Combustion Flasks
labForce® (powered by Thomas Scientific)6514F35 Ogg Flask of borosilicate glass, with Standard Taper 35/25 socket mouth; without stopper or sample carrier. 1233S49 Platinum Ogg Sample Carrier has a perforated aluminum sheet. It features a 13 mm deep basket on lower end that takes the paper-wrapped sample. 6514F40 Stopper fits the 1,000…
-
These PYREX® long neck shaker culture flasks are basically Erlenmeyer flasks to which a long straight, rimless neck of heavy tubing has been added. The longer necks reduce the amount of splashed solution reaching the closure. They are ideal for shaker cultures. Their uniform wall thickness…
-
Trypsinizing Flasks
DWK Life Sciences (Wheaton)For forming cell suspensions through trypsin digestion of connective proteins Fluted design improves homogenization Autoclavable with screw cap Constructed of borosilicate glass that conforms to USP Type I and ASTM E 438 Type I, Class A requirements Caps have white styrene butadiene…
-
These PYREX® Erlenmeyer flasks with phenolic screw caps are ideal for use as a shaker flask or for mixing, media prep and storage needs. Impact resistant caps with 24-410 GPI threads are equipped with cemented-in, inert white rubber liners which are resistant to steam sterilization. Their…
-
PYREX Boiling Flasks
CorningCarefully designed and manufactured from borosilicate glass Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and mechanical strength for greater shock resistance Excellent chemical durability provides contamination-free results and long life…
-
Round bottom Short ring neck These PYREX® round bottom boiling flasks have short ring necks. These ring neck boiling flasks are precisely tooled for uniform stopper fit. The reinforced rim increases mechanical strength. These flasks are used in applications requiring rigid stoppering…
-
Can be used with direct drive motor or magnetically driven paddle assembly Side baffles enhance aeration and agitation of flask contents Proprietary "stretch" impeller design ensures optimal stirring 4, 45mm vertical sidearms permit use with sidearm probes and fittings Vessels…
-
These PYREX® Erlenmeyer flasks have heavy tooled rims for maximum durability. The same baffle design as found on PYREX® Delong flasks promotes optimal and consistent solution agitation when used with flask shakers. Their uniform wall thickness provides the proper balance between mechanical…
-
PYREX Micro Tubulation Flask
CorningSmall filtering flasks are recommended for microchemical use All flasks have permanent white-enamel marking spots Takes rubber stopper No. 3; 50 mL size, No. 4; 125 mL size, No. 5
-
Flask Complete 6000 ml
CorningThese PYREX® 6L volumetric flasks provide improved lab convenience, broad selection and precise volume measurement. The strength of these flasks has been increased appreciably through machine-blown bodies to which are sealed heavy-tubing necks tooled for No. 38 Standard Taper pennyhead glass…
-
Plug-seal screw caps Graduated Neck opening: 29 mm Ideal for all media prep and storage needs. Easy to use with larger volume serological pipets.
-
Pear-shaped boiling flasks have full length outer 14/20 Standard Taper joints and are manufactured from No. 7740 borosilicate glass. Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and mechanical strength for greater shock resistance. Their…
-
Flask Only 200 ml
CorningThese PYREX® 200mL volumetric flasks provide improved lab convenience, broad selection and precise volume measurement. The strength of these flasks has been increased appreciably through machine-blown bodies to which are sealed heavy-tubing necks tooled for No. 13 Standard Taper glass stoppers.…
-
Angled Three Neck Round Bottom Flask
DWK Life Sciences (Kimble)Three-neck heavy wall round-bottom flask with Standard Taper outer joints Side necks are angled Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
-
PYREX round bottom boiling flasks have full length outer Standard Taper joints, but with shorter necks. They are manufactured from No. 7740 borosilicate glass. Wall thicknesses are controlled to provide balance between thermal expansion and mechanical strength for greater shock resistance. The…
-
PYREX Heavy Wall Filter Flasks
CorningWithout tubulation blown in special molds, designed to give maximum mechanical strength Graduated to show approximate capacity Permanent white-enamel graduations and marking spots Sizes from 250 mL to 4,000 mL
-
PYREX Erlenmeyer Shaker Flask
CorningDelong style Extra deep baffles These PYREX Delong style shaker culture flasks have three extra deep baffles designed to provide greater agitation of solutions to improve oxygen or gas transfer when used with rotary or reciprocating shakers. The long neck reduces splashing and is…
-
Spectral transmission varies from 0 at 300 nm to 4% at 500 nm With barrel-shaped, No. 27 Standard Taper stopper Capacity: 250 mL The protective color is an integral part of the flask, which retains the mechanical strength, chemical stability and thermal resistance of PYREX brand labware.
-
Magna Flex™ Microcarrier Spinner Flasks
DWK Life Sciences (Wheaton)The Wheaton Magna Flex Spinner Flasks feature a flex-type, bulb-shaped glass impeller that rotates from a fixed position above liquid level around an indentation in the base of the flask. Primarily designed for use with microcarrier cultures, this unique stirring system increases stirring…
-
Flask Complete 4000 ml
CorningThese PYREX® 4L volumetric flasks provide improved lab convenience, broad selection and precise volume measurement. The strength of these flasks has been increased appreciably through machine-blown bodies to which are sealed heavy-tubing necks tooled for No. 38 Standard Taper pennyhead glass…
-
Airless-Ware Kjeldahl Schlenk Flasks
DWK Life Sciences (Kimble)With a unique design for the manipulation of air-sensitive and moisture-sensitive compounds Features a modified Kjeldahl shape that facilitates heating, stirring and solvent stripping without impairing ease of liquid and solid transfer The bottom of the flask is shaped to fit Kontes oil…
-
Full length 24/40 joint on all sizes except 50 mL, which has Standard Taper 19/38 joint Graduated scale indicates approximate volumes Extra large marking space
-
PYREX Micro Volumetric Flasks
CorningMicrovolumetric Class A flasks are individually serialized and supplied with a Certificate of Identification and Capacity. Flasks are designed for microchemical work in accordance with the recommendations of the Committee of Microchemical Apparatus, Analytical Division of the A.C.S. To…
-
PYREX® Distilling Flasks
CorningSuitable for microchemical applications Side-arm on all sizes is approximately 77 mm below the top of the neck at an angle of 75° Adaptable for use with thermometer calibrated for 76 mm immersion 50 mL flask takes rubber stopper No. 1; 250 mL flasks, stopper No. 3; 500 mL flask, stopper No.…
-
Thomas Dissolution Vessel
labForce® (powered by Thomas Scientific)Graduated and sterilized, for use with popular dissolution testers Individual serial numbers Precision-made Fits popular instrumentation Borosilicate glass, round-bottom dissolution vessel for use with Vankel, Distek and others. Each flask is individually numbered for…