Non-cytotoxic and non-pyrogenic Nalgene, linerless seal ring system External thread provides no risk of contaminating contents of vial Self-standing without a holder; conical bottom allows complete sample retrieval Deep-skirted closure allows single-handed aseptic technique without…

Ribbed exterior, which permits free air passage when funnel is seated and prevents bridging Reinforced rim and smooth inner surface Autoclavable

Perform biopharmaceutical aseptic fluid transfer or sampling applications with the tri-clover flange of Thermo Scientific™ Nalgene™ PPCO Centrifuge Bottles, molded of transparent polypropylene copolymer. Ideal for large-volume cell harvesting, pelleting and protein purification, these…

Resistant to strong acids, alcohols and bases Nalge 2505 Autoclavable Polypropylene screw cap without liner Contact-clear bottles are graduated at 90 mL and 99 mL , accurate to 4 mL . Polypropylene copolymer, polypropylene screw closure. Temperature range -40 to 121°C…

Fit Thermo Scientific™ Nalgene™ Narrow Mouth and Wide Mouth Bottle Replacement Closures onto Nalgene narrow mouth and wide mouth bottles.

Incubate liquid cultures on a slant using Thermo Scientific™ Nalgene™ Test Tube Slant Racks. Slant racks allow 5 or 20 degree tilt to allow media to harden at an angle for incubating liquid cultures. These racks are keyed with numbers and letters for easy identification and are…

Autoclavable polypropylene, with tapered sides Cover has hand grip at center; skirted edges fit into groove molded into flanged top of pan Can be stacked when cover is in place Dimensions shown are length x width x depth.

With ringed divergent arms for attachment of tubing Autoclavable Outer diameter of arms is given in listings.

Economical, non-sterile without printing or graduations Deep-skirted screw closure design minimizes risk of contamination Self-standing without a holder; conical bottom allows complete sample retrieval Externally-threaded polypropylene vials and high-density polyethylene closures minimize…

Lightweight and durable Bottom and top can be separated for easier cleaning Autoclavable

Polyproylene funnels resist virtually all chemicals including hydrofluoric acid (5246T01 to T19) Teflon® TFE stopcock and housing Leakproof closure and stopcock Visible phase interface TFE housing eliminates need for lubrication which reduces the possibility of…

Replace glass lab funnels with Thermo Scientific™ Nalgene™ Utility Funnels, which are an excellent shatter-proof alternative.  5207H70 and 5207H78 are made from shatter-proof, autoclavable polypropylene 5207H86 has a large throat opening for faster transfer of materials…

Nalge 2212 With polypropylene screw closure 3 1/2” neck opening Sturdy handle is attached to molded-in shoulder loops Leakproof Autoclavable Ideal for storing solutions, media, and sterile water. Useful for handling large volumes of powders and other solid samples. Calibrated in liters…

Used to carry test tube racks, blood bags, saline bags, etc. Autoclavable Excellent for use in clean room environment where everything needs to be sterilized Molded-in center division with handle; overall L 14 7/8” x W 9 1/2” x H 4 1/2”. Meets OSHA Standard 29 CFR Part…

With ringed divergent arms for attachment of tubing Autoclavable Outer diameter of arms is given in listings.

Jerrican Cap with Strap 53mm screw thread

Linerless closures are for use only with NALGENE narrow- and wide-mouth bottles and Erlenmeyer flasks Autoclavable Available in natural and amber

Nalge 2324 Excellent chemical resistance Low profile design fits easily in tight spaces, on shelves or in refrigerators Leakproof Can be autoclaved repeatedly Polypropylene spigot and screw closure, size 63 mm; tubing same as 1753L30 series Dimensions: 8 liter Lowboys…

Thick-walled polypropylene Nalge 2126 Wide mouth Polypropylene bottle and closure TPE gasket for leakproof vacuum Sizes range from 1 to 5 liters Durable bottle for extra-rugged service. Polypropylene bottle with white polypropylene closure and TPE gasket provide…

Similar to 8652N30 series, but with three arms Stopcock has T-shaped bore for connecting any two or all three arms Offered in 2 mm and 4 mm bore sizes Arms serrated to take 1/4 to 3/8 inch tubing

Centrifugalize low- to moderate-speed large-volume biological and chemical samples with Thermo Scientific™ Nalgene™ PPCO Centrifuge Bottles, which include a sealing closure for added leakproof assurance at maximum speeds for when spinning hazardous materials. Molded of rigid and robust…

All-plastic clamp will not rust, corrode or deform Molded in one piece to eliminate sharp edges Autoclavable Allows precise, one hand regulation of fluid flow, from completely open, to restricted flow, to completely closed. Ideal for use with Nalgene laboratory tubing.

Autoclavable Consists of an array of pegs spaced to hold tubes while allowing full view of contents Pegs convenient for holding inverted tubes for drying When racks are inverted, ribs keep tubes off base to allow drainage through holes 9260B01 and B13 are 13 mm with an array of 8 x…

Resist stress cracking and increase tolerance to many organic chemicals with the Thermo Scientific™ Nalgene™ Cylindrical Polypropylene Tank with Cover, an economic alternative to stainless-steel tanks. Autoclavable cylindrical tanks are available in sizes ranging from 19L to 378L…

Nalge 2203 series Leakproof Same design as 1706L80 series, but autoclavable Sizes 1/2 and 1 gallon include size 38-430 cap; 2 gallon size includes 53B cap Autoclavable 1 and 2 gallon sizes have loop on shoulder

Polypropylene with Teflon® TFE plug No lubrication required Offered in 2 mm and 4 mm bore sizes Arms are five-mm bore, serrated to take 1/4 to 7/16 inch rubber tubing

Nalge 2204 series Pigmented to provide protection for light-sensitive materials Leakproof Sizes 1/2 and 1 gallon include size 38-430 cap; 2 gallon size includes 53B cap Autoclavable 1 and 2 gallon sizes have loop on shoulder

Dry and sterilize instruments and labware with Thermo Scientific™ Nalgene™ Large Polypropylene Sterilizing Pans. These autoclavable pans are also useful for collecting and washing soiled lab equipment. Pans feature rolled edges for extra stiffness and molded-in handles for easy…

Polypropylene Leakproof silicone gasket in closure Externally threaded vial Printed fill line, graduations and white marking area For use in mechanical and vapor-phase freezers. Leakproof to 8000 x g in centrifuge. Includes Certificate of Quality which assures that vials are non-cytotoxic,…

Non-scratching Empty racks can be stacked Tube-centering depressions in bottom shelf are perforated. The hole rows have molded-in numbers and letters. Not autoclavable. All racks are 115 mm wide x 95 mm high.

Significantly reduce evaporation and contamination by using a Thermo Scientific™ Nalgene™ Rectangular Polypropylene Tank with Cover, offered in sizes ranging from 8 to 114L. Tanks can be modified with a factory-installed spigot. Features: Suitable for use with many…

Use the Thermo Scientific™ Nalgene™ Autoclavable Polypropylene Carboys with 1.5" Sanitary Flanges as dispensing ports or with secure hookup for supply reservoirs to systems such as fermentors or chromatography columns. Features: Molded-in handles for ease in…