Store any components requiring controlled storage conditions, such as anhydrous and hygroscopic biological and chemical compounds and electronic assemblies. Thermo Scientific™ Nalgene™ Acrylic Desiccator Cabinets are clear and feature gaskets to provide a tight seal. Neoprene…

Maintain an airtight seal on the Thermo Scientific™ Nalgene™ Transparent Polycarbonate Classic Design Desiccator without the need of vacuum grease which can act as a possible lab contaminant. Lightweight and nearly unbreakable, the desiccator can be used under full-vacuum and non-vacuum…

Fits faucet with 3/ 8 inch internal pipe thread Usable for pump-off of corrosive vapors which attack metal Operates efficiently with water pressures as low as 7.5 psi for minimum water consumption Maximum free air pumping capacity of 11.5 liters per minute at a water flow rate of 6.5 liters per minute

Compact, lightweight, light duty hand pumps Useful for numerous small volume vacuum or pressure requirements in the laboratory or field Provides vacuum of 25 inches Hg (85 kPa) Pumping rates of 15 or 36 cc per stroke Pumps are molded of polyvinyl chloride, with finger grips in squeeze-type…

Ensure leakproof† service of Thermo Scientific™ Nalgene™ centrifuge bottles at their recommended maximum rated speeds by using Nalgene sealing caps for oak ridge centrifuge tubes. They are also recommended for use when spinning hazardous materials.

Polypropylene screw closure Teflon TFE stir bar Polyvinylidene fluoride, stainless steel reinforced shaft TFE impeller Ideal for low-speed mixing of large volumes of media and buffer solutions on a magnetic stir plate For use with Nalgene 10 and 20-liter carboys with 83B (83-mm)…

Reduce the risk of carry-over contamination and eliminate the cost of cleaning, sterilizing and associated validations. Use sterile, ready-to-use Thermo Scientific™ Nalgene™ Biotainer™ bottles and Carboys, designed specifically for pharmaceutical and biological manufacturers. Excellent for freezing applications.

Concave PC, White

Works best between 10 to 28 in. Hg Prevents back pressure with aspirator-type vacuum pumps Made of high-density polyethylene with gum rubber flap Serrated connectors on inlet and outlet take 1/4- to 5/16-inch-bore tubing Useful for vacuum systems Not for use with liquids

Top used with 3756H10 and 3756C60 Dessicators Transparent PC cover and PP base will not shatter or implode at full vacuum when used properly Desiccator body is resistant to solid desiccants, including acids and alkalines Convenient vacuum connection on body makes cover easy to handle …

Wear the adjustable Thermo Scientific™ Nalgene™ Polycarbonate Faceshield over safety glasses. With an optically clear window made of 1/16" (1.5mm) thick polycarbonate, this faceshield provides impact protection as well as protection from UV light in the 200-360nm range. It is…

Conical bottom bottles RCF 27,500 x g Withstand temperatures of -40° to +121°C Autoclavable bottles include 58 mm polypropylene sealing caps and retained silicone gaskets. Dimensions (o.d. x H, mm): 61.5 x 140.

Polycarbonate bottles RCF to 27,500 x g Withstand temperatures of -135° to +135°C Round bottoms Autoclavable (autoclaving shortens bottle life). Include 38 mm polypropylene caps. Dimensions (o.d. x H, mm): 61.7 x 136.

Ensure leakproof† service of Thermo Scientific™ Nalgene™ centrifuge bottles at their recommended maximum rated speeds by using Nalgene sealing caps for oak ridge centrifuge tubes. They are also recommended for use when spinning hazardous materials.

Ideal for temporary waste containment Easy-snap safety latch on lid Lid/vent system reduces volatile emissions Wide mouth funnels for easy pouring Safer than glass HDPE and PTFE material construction resists most common lab solvents, acids and bases. Removable neck screen…

Ensure safe and efficient liquid dispensing from tanks by using Thermo Scientific™ Nalgene™ spigots for storage tanks. Spigots are for use with Naglene™ tanks up to 100 gal. with factory installed threaded boss.

Closure with Silicone Grommet for Nalgene # 2227-0020

Acrylic Plastic Made of transparent acrylic plastic to give maximum protection against beta radiation during procedures such as nucleic acid sequencing, recombinant DNA studies, etc., using beta emitting isotopes Beta radiation from a 100 mCi point source of P 32 shows no penetration through a…

All-plastic clamp will not rust, corrode or deform Molded in one piece to eliminate sharp edges Autoclavable Allows precise, one hand regulation of fluid flow, from completely open, to restricted flow, to completely closed. Ideal for use with Nalgene laboratory tubing.

Polycarbonate For use with Nalgene 3145 series

Nalgene™ 3/4 in x 1/2 in Mini Hose Barb Connector is an autoclavable, polypropylene 3/4 in. (19 mm) Sanitary to 3/8'' Hose-barb adapter. It adapts sanitary ports on Cat # 2688-2075 and Cat. # 2689-2075 end caps to tubing, either 3/8- or 1/2-in. Application: For Research Use Only

Thermo Scientific™ Nalgene Fernbach Culture Flask is constructed of durable, transparent polycarbonate, and provides a wide surface area desirable for culturing in liquid media, increasing aeration for better growth. Break-resistant, transparent polycarbonate; safer than glass…

Teflon® FEP Bottles RCF to 4,000 x g Withstand temperatures from -100° to +150°C Flat bottoms Autoclavable bottles have an 80% capacity (approx. 200 mL) in refrigerated centrifuges. Bottles include 38 mm Tefzel® ETFE screw caps. Dimensions (o.d. x H, mm): 62 x 122.

View contents easily with Thermo Scientific™ Autoclavable Polypropylene Desiccators, featuring a robust body and high resistance to all solid desiccants. These desiccators have a transparent polycarbonate cover. The small size (3756C20) comes with a 140mm aluminium plate. The plate for the…

Easily fill and pour with Thermo Scientific™ Nalgene™ square wide-mouth HDPE bottles with closure. Featuring molded-in graduations for easy measuring and durable, uniform walls that are resistant to splitting or puncturing, these translucent bottles provide visible liquid levels and come in a…

Secure-fitting Thermo Scientific™ Nalgene™ replacement screw closures and gaskets for Nalgene carboys provide leakproof† service.

Reduce the risk of carry-over contamination and eliminate the cost of cleaning, sterilizing and associated validations. Use sterile, ready-to-use Thermo Scientific™ Nalgene™ Biotainer™ Bottles and Carboys, designed specifically for pharmaceutical and biological manufacturers.…

Clearly view contents with the transparent PC cover of the Thermo Scientific™ Nalgene™ Polypropylene Desiccator with Stopcock. Lighter in weight than glass, the robust polypropylene body is compatible with all solid desiccants and protects against breakage. This desiccator is for room…

Double your cryobank storage capacity and cut storage costs by 50%. The Thermo Scientific™ dense storage options use standard CryoBoxes™ with 13 x 13 tube separators and fit 169 1mL tubes in a single CryoBox™. These standard-sized boxes are compatible with existing standard-sized lab freezer racks.

Guaranteed unbreakable Greater resistance to thermal shock than porcelain Fire polished, corrosion-resistant, inert, non-stick glass surfaces bonded to metal Marked with numbered quadrants for easy location of crucibles and other containers, allows use by several people Diameter 9 inches;…

Angled pipet holder prevents pipets from sliding out. Accommodates bags, boxes, pipet canisters or 1 - 100 mL individually-wrapped serological pipets.

Save lab space with stackable Thermo Scientific™ Nalgene™ microcentrifuge Tube Racks. These chemical-resistant racks have molded letters and numbers for easy identification. Thermo Scientific™ ResMer™ manufacturing technology retains its color and performance in harsh lab environments. Racks are…