High-density Polyethylene bottles RCF to 8,000 x g Withstand temperatures to -100°C Flat bottoms HDPE bottles are for use with refrigerated centrifuges. Bottles include 43 mm polypropylene screw caps. Dimensions (o.d. x H, mm): 61 x 128.

Conduct secondary containment of biohazardous waste with Thermo Scientific™ Nalgene™ Biohazardous Waste Containers, which feature convenient one-step sterilization-no need to remove the bag. A port opening in the cover allows for one-handed disposal of materials, limiting exposure to infectious…

Easily fill and pour with Thermo Scientific™ Nalgene™ square wide-mouth HDPE bottles with closure. Featuring molded-in graduations for easy measuring and durable, uniform walls that are resistant to splitting or puncturing, these translucent bottles provide visible liquid levels and come in a…

Maintain an airtight seal on the Thermo Scientific™ Nalgene™ Transparent Polycarbonate Classic Design Desiccator without the need of vacuum grease which can act as a possible lab contaminant. Lightweight and nearly unbreakable, the desiccator can be used under full-vacuum and non-vacuum…

Reduce the risk of carry-over contamination and eliminate the cost of cleaning, sterilizing and associated validations. Use sterile, ready-to-use Thermo Scientific™ Nalgene™ Biotainer™ Bottles and Carboys, designed specifically for pharmaceutical and biological manufacturers.…

Ideal for temporary waste containment Easy-snap safety latch on lid Lid/vent system reduces volatile emissions Wide mouth funnels for easy pouring Safer than glass HDPE and PTFE material construction resists most common lab solvents, acids and bases. Removable neck screen…

Wear the adjustable Thermo Scientific™ Nalgene™ Polycarbonate Faceshield over safety glasses. With an optically clear window made of 1/16" (1.5mm) thick polycarbonate, this faceshield provides impact protection as well as protection from UV light in the 200-360nm range. It is…

Impellers made of stainless steel (8592H39 through H48) or glass-filled propylene (8592H36) Autoclavable 8592H36 Lower Assembly/Shaft and Impeller; shaft length x diameter: 13-1/2" x 3/8"; impeller diameter: 4". 8592H39 Lower Assembly is for use with the Nalgene 30-gallon,…

All-plastic clamp will not rust, corrode or deform Molded in one piece to eliminate sharp edges Autoclavable Allows precise, one hand regulation of fluid flow, from completely open, to restricted flow, to completely closed. Ideal for use with Nalgene laboratory tubing.

Clearly view contents with the transparent PC cover of the Thermo Scientific™ Nalgene™ Polypropylene Desiccator with Stopcock. Lighter in weight than glass, the robust polypropylene body is compatible with all solid desiccants and protects against breakage. This desiccator is for room…

Thermo Scientific™ Nalgene Probe Adapter Closures allow for insertion of 7- to 14mm diameter probes into Thermo Scientific Nalgene Culture Vessels and Bottles with 38-430 neck finishes. Provides a seal between the external environment and the interior of the culture vessels to prevent…

Acrylic Plastic Made of transparent acrylic plastic to give maximum protection against beta radiation during procedures such as nucleic acid sequencing, recombinant DNA studies, etc., using beta emitting isotopes Beta radiation from a 100 mCi point source of P 32 shows no penetration through a…

Closure with Silicone Grommet for Nalgene # 2227-0020

Double your cryobank storage capacity and cut storage costs by 50%. The Thermo Scientific™ dense storage options use standard CryoBoxes™ with 13 x 13 tube separators and fit 169 1mL tubes in a single CryoBox™. These standard-sized boxes are compatible with existing standard-sized lab freezer racks.

Designed for use in a wide range of applications, Thermo Scientific™ Nalgene™ filtration hardware and accessories can be used in conjunction with our various lines of filtration devices.

Angled pipet holder prevents pipets from sliding out. Accommodates bags, boxes, pipet canisters or 1 - 100 mL individually-wrapped serological pipets.

Thermo Scientific™ Nalgene Fernbach Culture Flask is constructed of durable, transparent polycarbonate, and provides a wide surface area desirable for culturing in liquid media, increasing aeration for better growth. Break-resistant, transparent polycarbonate; safer than glass…

Designed for staining, fixing, destaining and handling electrophoresis gels and blotting membranes Usable on a shaker Two sizes accommodate 100 x 100 and 200 x 200 mm gels Holds 500 to 750 mL liquid Cover reduces evaporation and spillage Integral drain plug allows for easy…

Store any components requiring controlled storage conditions, such as anhydrous and hygroscopic biological and chemical compounds and electronic assemblies. Thermo Scientific™ Nalgene™ Acrylic Desiccator Cabinets are clear and feature gaskets to provide a tight seal. Neoprene…

Works best between 10 to 28 in. Hg Prevents back pressure with aspirator-type vacuum pumps Made of high-density polyethylene with gum rubber flap Serrated connectors on inlet and outlet take 1/4- to 5/16-inch-bore tubing Useful for vacuum systems Not for use with liquids

Concave PC, White

Polycarbonate bottles RCF to 27,500 x g Withstand temperatures of -135° to +135°C Round bottoms Autoclavable (autoclaving shortens bottle life). Include 38 mm polypropylene caps. Dimensions (o.d. x H, mm): 61.7 x 136.

Polypropylene screw closure Teflon TFE stir bar Polyvinylidene fluoride, stainless steel reinforced shaft TFE impeller Ideal for low-speed mixing of large volumes of media and buffer solutions on a magnetic stir plate For use with Nalgene 10 and 20-liter carboys with 83B (83-mm)…

Ensure safe and efficient liquid dispensing from tanks by using Thermo Scientific™ Nalgene™ spigots for storage tanks. Spigots are for use with Naglene™ tanks up to 100 gal. with factory installed threaded boss.

Reduce the risk of carry-over contamination and eliminate the cost of cleaning, sterilizing and associated validations. Use sterile, ready-to-use Thermo Scientific™ Nalgene™ Biotainer™ bottles and Carboys, designed specifically for pharmaceutical and biological manufacturers. Excellent for freezing applications.

Top used with 3756H10 and 3756C60 Dessicators Transparent PC cover and PP base will not shatter or implode at full vacuum when used properly Desiccator body is resistant to solid desiccants, including acids and alkalines Convenient vacuum connection on body makes cover easy to handle …

This durable pump easily and quickly attains and holds vacuum of 25 in. (635 mm) Hg Vacuum trigger release requires only one hand to operate and releases vacuum with the touch of an index finger Adjustable vacuum release rate Pumping rate of 15 cc/stroke and 15 psig (1.0 bar)…

Store reagents with the Thermo Scientific™ Nalgene™ Jerrican with Tethered Polypropylene Closure, featuring a space-saving design, molded-in handle and recessed grip at the bottom to provide better control when pouring. The double-ported 2243-9013 is ideal as a reservoir in automated systems. The…

Ensure leakproof† service of Thermo Scientific™ Nalgene™ centrifuge bottles at their recommended maximum rated speeds by using Nalgene sealing caps for oak ridge centrifuge tubes. They are also recommended for use when spinning hazardous materials.

Guaranteed unbreakable Greater resistance to thermal shock than porcelain Fire polished, corrosion-resistant, inert, non-stick glass surfaces bonded to metal Marked with numbered quadrants for easy location of crucibles and other containers, allows use by several people Diameter 9 inches;…

Conical bottom bottles RCF 27,500 x g Withstand temperatures of -40° to +121°C Autoclavable bottles include 58 mm polypropylene sealing caps and retained silicone gaskets. Dimensions (o.d. x H, mm): 61.5 x 140.

Nalgene™ 3/4 in x 1/2 in Mini Hose Barb Connector is an autoclavable, polypropylene 3/4 in. (19 mm) Sanitary to 3/8'' Hose-barb adapter. It adapts sanitary ports on Cat # 2688-2075 and Cat. # 2689-2075 end caps to tubing, either 3/8- or 1/2-in. Application: For Research Use Only