PerkinElmer Lab Sampling Systems
-
SPB 100-30, 30 position 100 mL 115/230 V
PerkinElmerGraphite blocks are PTFE-coated to resist aggressive corrosive attack for guaranteed long life in harsh laboratory environments. Our sample blocks operate with either a SPB Digital Controller or SPB Touch Controller*. Please select a controller below and the appropriate Start Up Kit* which includes…
-
-
4 L Polypropylene Rinse Container with Cap
PerkinElmerThis 4 liter polypropylene rinse container features a filtered air inlet.
-
Cap for High Pressure 100 mL (100 Bar) Digestion vessels without DPC pressure sensor for Titan MPS 8 Position Microwave Sample Preparation Systems. Includes Vessel Cap made of TFM with pressure sensor for High Pressure 100 mL (100 Bar) Digestion Vessel.
-
50 mm Camlock Powder Cup with Quartz Base
PerkinElmerA black, round, metal sample cup with quartz glass installed in the base. The cup comes with a locking metal back and a foam insert. The cup can be used to analyze dry, ground food or agriculture products. Once the cup is filled, please use disposable backs (L1281934).
-
Type B Sample Tray
PerkinElmerThe PerkinElmer Type B sample tray with a sample capacity of 98 can hold 15 mL and 16 mL sample vessels and is used with PerkinElmer AS-90/90A/90plus auto sampler.
-
Length: 1m, Inner Diameter: 0.6mm, Two Fittings
-
100 mL PFA Bottle with Cap
PerkinElmerPFA bottles and vials are ideal for a wide range of demanding fluid handling and storage applications in general laboratory, semiconductor and environmental industries.
-
For Standard 75 mL (40 Bar) Digestion Vessel.
-
Polypropylene needs with 24 Positions
PerkinElmerPolypropylene or stainless steel needles minimize dead volume.
-
-
2.5mL Polypropylene Disposable Sample Cups
PerkinElmerSample cups are of heavy-duty construction to prevent cracking or tipping. Their conical design allows for use of nearly the entire sample. Translucent; preferred for most solvents.
-
Autosampler Carbon Fiber Sample Probe
PerkinElmerThe carbon fiber reinforced probes are designed to be mounted to a Z-drive with two probe clamps and without a guide plate. The carbon fiber probes can also be used with the prior version Z-drives, but the guide plate must be used. Most CETAC autosamplers built since January 2009 are equipped with…
-
-
Bue polypropylene plugs used with 15 mL polypropylene tubes (N0777167).
-
It includes: 6 ft (1.82 m) 1/8" I.D. Tygon ® tubing 1 - Y connector assembly w/ attached Tygon tubing 1 - 20 cm length 1/8" in I.D. Tygon tubing 1 - 12.7 cm length 1/8" I.D. Tygon tubing 2 - uptake lines w/ 1.2 m 1/8" I.D. Tygon w/ 30 cm 3/32" I.D. FEP tubing 2 - 4.25" lengths of 1.6 mm…
-
-
-
Start Up Kit for SPB 15-108
PerkinElmerPerkinElmer offers SPB Start Up kits containing all consumable items required to operate the system including: RackLock DigiTUBEs and Caps and DigiFILTers, RackLock Racks and Storage Racks. Includes 540 Caps and 2 Racks.
-
-
Polypropylene needs with 12 Positions
PerkinElmerSPE Vacuum Manifolds accommodate either 12 or 24 cartridges; 1, 3, 6, 15 and 25 mL columns can be used. Manifolds are equipped with a vacuum port to connect a standard laboratory vacuum pump. Vacuum pulls the sample through the stationary phase, metered by the stopcocks, to control the speed of the…
-
NexION Sample Tray
PerkinElmerWe offer replacement Sample Trays for use with NexION 300 inductively coupled plasma mass spectrometry (ICP-MS) models.
-
Plastic Storage Rack, 50 mL
PerkinElmerWe offer several storage racks for storing DigiTUBEs. The plastic storage rack stores 50 mL DigiTUBEs and comes in packs of 5.
-
Vis/NIR (400 to 2400nm) 2 x 2m each.
-
10 position standards rack 31mm
PerkinElmer10 position standards rack, 31mm, for 30 mm PFA vessels (N8145132, N8145133, and N8145134) or 31 mm digestion tubes
-
Optional accessory for exhausting Titan MPS oven cavity in laboratories that do not have exhaust systems. Includes: one 1.5 m exhaust tube. ID = 76 mm, OD = 82 mm. and power cord (US).
-
Adapter M, 1/4in (6.4 mm) External Screw Thread, 4mm Outer Diameter Nipple for FIAS-100, FIAS-400, FIAS-400MS and AS-93 Plus/S10 Rinsing Kit
-
Vacuum Pump 115V
PerkinElmerThe vacuum assisted Digi FILTER assembly provides a quick and easy way to filter samples prior to analysis.
-
Sample Tray Cover
PerkinElmerThe PerkinElmer sample tray cover is installed on the auto sampler tray of AS-800 and AS-900 absorption instruments to cover the sample cups.
-
60 mm Soda Glass Petri Dishes
PerkinElmerThe PerkinElmer 60 mm Soda Glass Petri Dishes are suitable for NIRA II 60 mm spinner. Includes pack of 10 Soda glass Petri dishes with lids.
-
-
The Standard Cell Holder is provided as standard equipment with your PerkinElmer LAMBDA Series instrument. A lifter (included) makes short cell removal easy. It accommodates a large selection of rectangular cells up to 10 mm pathlength. The Standard Cell Holder is adjustable both vertically and horizontally.