Kemtech America Lab Flasks
-
SYNTHWARE Round Bottom Flasks
Kemtech AmericaSYNTHWARE round bottom boiling flasks with full length standard taper outer joint. All sizes are heavy wall design and are hand blown from borosilicate tubing to ensure uniform wall thickness.
-
SYNTHWARE round bottom, heavy wall, four neck flasks with standard taper outer joints on both the center neck and the vertical side necks. All sizes are hand blown from tubing to ensure uniform wall thickness.
-
SYNTHWARE Storage Tubes with Outer Joints
Kemtech AmericaSYNTHWARE storage tube with standard taper outer joint and high vacuum valve. Valve has a PTFE o-ring at the tip. Valve is used to control liquid or gas flow into the vessel.
-
SYNTHWARE Round Bottom Angled Three Neck Flasks
Kemtech AmericaSYNTHWARE round bottom, heavy wall, three neck flasks with standard taper outer joints on both the center neck and the angled side necks. All sizes are hand blown from tubing to ensure uniform wall thickness.
-
SYNTHWARE Immersion Well, Photochemical
Kemtech AmericaImmersion Well, Photochemical, Synthware, Without Joint, Outer Body Length: 390mm.
-
SYNTHWARE Round Bottom Vertical Three Neck Flasks
Kemtech AmericaSYNTHWARE round bottom, heavy wall, three neck flasks with standard taper outer joints on both the center neck and the vertical side necks. All sizes are hand blown from tubing to ensure uniform wall thickness.
-
SYNTHWARE Schlenk Storage Tubes with High Vacuum Valves
Kemtech AmericaSYNTHWARE Schlenk storage tube with a high vacuum valve. The valve has a PTFE O-ring at the tip and a PTFE wiper to protect the O-rings on the shaft. Valve is used to control liquid or gas flow into the vessel.
-
SYNTHWARE Microscale Pear-Shape Flasks
Kemtech AmericaPear Shape Flask, Threaded, Synthware, Capacity: 5, 10, and 25mL available, Joint: 14/10, Supplied with one open top compressioncap and one size 014 Viton O-ring and one PTFE-faced septa.
-
SYNTHWARE Low Form Hemispherical Dewar Flasks
Kemtech AmericaDewar Flask, Low Form, Hemispherical Multiple sizes available, with aluminum base to allow transfer of magnetic field. *Due to extra high vacuum, the Dewar flasks still have a rare possibility to explode, so working behind a safety shield in hood and always wearing goggles are strongly recommended.
-
SYNTHWARE Heavy Wall Cylindrical Pressure Vessels
Kemtech AmericaPressure Vessel, Heavy Wall, Cylindrical, Synthware, Capacity: 15-120mL available, GL Thread Size: 15, Vessel has an internal thread for use with PTFE bushing, O-ring is positioned above the thread for inproved sealing.
-
SYNTHWARE Round Bottom Flasks with Threaded Side Inlets
Kemtech AmericaSYNTHWARE round bottom, heavy wall, flask with standard taper outer joint and threaded side port. All sizes are hand blown from tubing to ensure uniform wall thickness. Side port is for insertion of thermometer or bleed tube having an O.D. between 5mm and 7.5mm.
-
SYNTHWARE Round Bottom Two Neck Flasks
Kemtech AmericaSYNTHWARE round bottom, heavy wall, two neck flasks with standard taper outer joints on both the center neck and the angled side neck. All sizes are hand blown from tubing to ensure uniform wall thickness.
-
SYNTHWARE Pear Shaped Flasks
Kemtech AmericaSYNTHWARE pear shaped, heavy wall, two neck flasks with an angled side neck. All joints are standard taper outer joints. All sizes are hand blown from tubing to ensure uniform wall thickness.
-
Synthware Heavy Wall Volumetric Flasks
Kemtech AmericaHeavy Wall Available from 5mL-1000mL Individually Certified Class A Glass Stopper included
-
SYNTHWARE Pear Shaped Flasks
Kemtech AmericaSYNTHWARE pear shaped, heavy wall, single neck flasks with a standard taper outer joint. All sizes are hand blown from tubing to ensure uniform wall thickness.
-
SYNTHWARE Microscale Filtering Flasks
Kemtech AmericaFiltering Flask, Microscale, Synthware, Capacity: 25 or 50mL available, Top is tooled for #2 neoprene filter adapter or #3 rubber stopper
-
SYNTHWARE Modified Schlenk Flasks with Glass Stopcocks
Kemtech AmericaSYNTHWARE modified Schlenk flask with a standard taper outer joint and 2mm bore glass stopcock in side arm. The Kjeldahl shape permits easy transfer of liquids and solids. The lower portion of the flasks fits standard heating mantles to facilitate heating and stirring.
-
SYNTHWARE round bottom two neck reaction flask with standard taper outer joints and 2mm bore glass stopcock sidearm. Useful for sample storage and simple reactions. The stopcock has a constant pressure retention device.
-
SYNTHWARE Filter Flasks
Kemtech AmericaSYNTHWARE filter flask with standard taper outer joint and 10mm O.D. hose connection. All sizes are blown from tubing to ensure heavy and uniform wall.
-
SYNTHWARE Round Bottom Angled Four Neck Flasks
Kemtech AmericaSYNTHWARE round bottom, heavy wall, four neck flasks with standard taper outer joints on both the center neck and the angled side necks. All sizes are hand blown from tubing to ensure uniform wall thickness.
-
SYNTHWARE Cylindrical Filter Funnels with Valve/Stopcock
Kemtech AmericaFilter Funnel, Cylindrical, Valve/Stopcock, Synthware, Capacity: 60 or 200mL available, Joints: 14/20 or 24/40 available, Frit OD: 30 or 40mm available, Frit Porosity: Medium or coarse, with a 0-4mm high vacuum valve and a 2mm glass stopcock/having a constant pressure retention device.
-
SYNTHWARE Filter Funnels with Fritted Disc & 2mm Glass Stopcocks
Kemtech AmericaFilter Funnel with Fritted Disc with 2mm glass stopcocks. Joint Size: 14/20 or 24/40, Frit O.D: 30mm, Porosity: Coarse or Medium, Capacity: 60mL.
-
SYNTHWARE Flat Bottom Flasks
Kemtech AmericaSYNTHWARE flat bottom boiling flasks with full length standard taper outer joint. All sizes are heavy wall design and are hand blown from borosilicate tubing to ensure uniform wall thickness.
-
SYNTHWARE Evaporation Flasks
Kemtech AmericaSYNTHWARE modified evaporation single neck flask with a standard taper outer joint. Low profile design sits upright on bench and also provides for easy product access with a spatula. Flask shape is excellent for the controlled evaporation of foaming solvents such as toluene or xylene on a rotary evaporator.
-
SYNTHWARE Tall Form Dewar Flasks
Kemtech AmericaDewar Flask, Tall Form, Metal Housing Capacity: 350, 665, 1000, 1900, 3500, and 4300mL available Interior Depth: 125, 195,190, 302 and 305mm available Interior Diameter: 70mm Flask has weighted base for stability and a full length aluminum housing which extends to the top rim. *Due…
-
SYNTHWARE Round Bottom Three Neck Flasks with Bottom Outlets
Kemtech AmericaSYNTHWARE round bottom, heavy wall, three neck flasks with a bottom outlet. Both the center neck and the vertical side necks are standard taper outer joints. The lower outlet is a 4mm straight bore PTFE stopcock. All sizes are hand blown from tubing to ensure uniform wall thickness.
-
SYNTHWARE Modified Schlenk Flasks with Teflon® Stopcocks
Kemtech AmericaSYNTHWARE modified Schlenk flask with a standard taper outer joint and a 2mm bore PTFE stopcock in side arm. The Kjeldahl shape permits easy transfer of liquids and solids. The lower portion of the flasks fits standard heating mantles to facilitate heating and stirring.
-
SYNTHWARE Kuderna-Danish Flasks
Kemtech AmericaTop joint is a 24/40 outer while the lower joint is a 19/22 inner.
-
SYNTHWARE Recovery Flasks
Kemtech AmericaSYNTHWARE recovery/evaporating, heavy wall, single neck flask with a standard taper outer joint. Desined for easy recovery of reaction products and for use with rotary evaporators. All sizes are hand blown from tubing to ensure uniform wall thickness.
-
-
SYNTHWARE Round Bottom Flasks with Spherical Socket Joints
Kemtech AmericaSYNTHWARE round bottom boiling flasks with spherical socket joint. All sizes are heavy wall design and are hand blown from borosilicate tubing to ensure uniform wall thickness. These flasks can be used as replacements for the collection flask on rotary evaporators.
-
SYNTHWARE Round Bottom Pressure Vessels
Kemtech AmericaPressure Vessel, Round Bottom, Synthware, Capacity: 75, 15, or 350mL available, OD: 46-80mm available, Length: 129-162mm available, GL Thread: 15 or 25 available.