IBI’s CS-9615 is a Casting Fixture built to hold and seal the GB-9615, 23.5cm (wide) x 15cm (long) Gel Bed, during the pouring of agarose gels. This fixture seals both ends of the gel bed and once the agarose has cooled, the gel bed can be easily removed. The CS-9615 is constructed of…

IBI's CS-3210 Casting Fixture Tray is an accessory for JSB-302 Double-Wide Mini Gel-O Submarine system. It's built to hold and seal the GB-3210 - 15cm (wide) x 10cm (long) Gel Bed, during the pouring of agarose gels This fixture seals both ends of the gel bed and once the agarose…

The JSB-30 is a 7.5cm x 10cm mini gel in a . horizontal format that will accommodate up . to 18 samples per run. The ideal unit for PCR, . fragment analysis or recombinant screening. Constructed of heavy-duty 1/2" cast acrylic . for years of dependable service. The JSB-30 also provides the user…

Gel Size: 7cm(w) x 10cm(l) Buffer volume: 375ml Designed for quick screening and rapid, linear separation of nucleic acids. The QS710 (IBI No. IB51000 ) requires minimal set-up and provides excellent band resolution and consistent lane-to-lane mobility for accurate results. A versatile system,…

Operational speed: 0-100RPM Platform Pitch Control: 0° - 8° Operating Temperature: 0°C - 60°C Operates: CO₂ Incubator and 97% Non-condensing humidity Weight on platform: 5lbs Standard Platform: 7” x 7” The Belly Button Shaker Lab…

The PR-10 pipette filler stand is a colorful utility stand for your lab’s pipette fillers. It is constructed of sturdy and durable 1/4” cast acrylic for years of continued use. The 1” diameter hole accepts most mechanical pipette fillers with ease. The skid-proof rubber feet also…

Gel Size: 10cm(w) x 15cm(l) Buffer volume: 500ml The MP1015 is the ideal multi-purpose gel box for both extended high resolution, linear runs, and economical quick screens. The MP1015 contains buffer recirculation ports for long runs requiring recirculation. The MP1015 is constructed of…

Well Width: 5.8mm Sample Volume per mm Gel Thickness: 8.7ul The CSD-1516, 1.5mm x 16 tooth comb is compatible with the JSB-302 Double-Wide Mini Gel-O Submarine system. This comb requires the use of the CH-302 comb holder for use in the JSB-302 system. These combs are press-cut from…

Gel Size: 18 x 16 cm Buffer volume: 1L This double slab Vertical System allows two gels to be run simultaneously under identical buffer conditions in an 18 x 16cm format. A soft silicone sponge gasket and notched inner plate ensure a perfect seal and prevent leaking. The system uses a…

Gel Size: 43cm x 36cm Buffer volume: 530 ml Overall height: 48 cm Unit footprint: 49 x 22 cm The IBI STS-45i sequencing unit has a complete list of features that has made it a favorite in laboratories worldwide. Featuring easy turn knobs that are designed for ease of…

The IBI Blot Washer system provides an economical way to automate your western blotting procedures while reducing background issues. The pump/control unit coupled with the 4L wash and waste reservoirs provide automated dispensing and aspiration of western blot reagents. The IBI Blot Washer system…

Gel Size: 25cm(W) x 25cm(L) Buffer volume: 1500ml This high throughput system is designed to complete analysis of up to 200 samples from microtiter plates and is ideal for running all types of precast gels. The large format can run gels in less than 30 minutes. This…

IBI Flow Cells are an affordable, sterile, consumable apparatus for the creation of biofilms and for direct, non-destructive, on-line microscopic examination of biofilms. The gamma irradiated, fully-assembled flow cell assemblies come in an airtight package and only need to be opened and connected…

The IBI Hi-Lo Rocker is rugged and versatile. Constructed of 300 series stainless steel, this unit is made to operate in multiple environments and provide years of worry free service. Stainless steel construction allows for cleaning and sterilization of shelves and also prevents staining, fading or…

Arrange your pipettes with a 3-, 4-, or 6-place IBI pipette stand. The fluorescent orange shelves accept most major brands of pipettes, and we help brighten up your bench top as well. These pipette stands are made from durable 1/4” cast acrylic for years of use, and the skid resistant feet…

The IBI Low Profile Roller is a lightweight unit designed as a compact, space saving, non-dedicated instrument. This unit will operate on the bench top, inside high humidity and CO2 incubators, high temperature ovens (60°C), and refrigerators (0°C). The IBI Low Profile Roller comes standard…

The PST-10 is a colorful utility stand for your multi-channel pipette, made from durable 1/4” cast acrylic for years of use on your bench top. The large 1 1/2” x 1 1/8” notch accepts most pipettes available today, and the skid-sresistant feet keep this pipette stand from sliding.

The IB57020 is a UVT casting tray designed for use in the IB57000 (HR2525 Horizontal Electrophoresis System). It is constructed of OP-1 grade cast acrylic to allow the passage of UV light during the viewing the elecrophoresis gel run. This tray produces a gel measuring 25x25cm, and has 4 equal…

The IBI MaGELin IB94300 allows for rapid analysis of protein and nucleic acid samples in an 10cm x 10cm pre-cast polyacrylamide gel format. Analysis can be completed two to three times faster than is possible with conventional 16cm gels while maintaining comparable resolution. This system has been…

Well Width: 4.0mm Sample Volume per mm Gel Thickness: 6.0ul The CSD-1527, 1.5mm x 27 tooth comb is compatible with the JSB-302 Double-Wide Mini Gel-O Submarine system. This comb requires the use of the CH-302 comb holder for use in the JSB-302 system and is included with the purchase of…

Gel Size: 22 x 20 cm Buffer volume: 550ml each chamber Designed for high resolution DNA or protein separations. It is ideal for mapping purposes or for blotting applications.

Arrange your pipettes with this 6-place IBI pipette stand. The fluorescent orange shelves accept most major brands of pipettes, and we help brighten up your bench top as well. These pipette stands are made from durable 1/4” cast acrylic for years of use, and the skid resistant feet will…

IBI's Semi-Dry Blotters are electrophoretic devices designed for fast, efficient, and economical transfer of proteins, DNA, or RNA from polyacrylamide or agarose gels onto a solid membrane support. These membranes can be visualized by staining or other immunological methods.

The MaGELin Western Transfer System provides the user with a complete system for the rapid transfer of protein or peptide samples or nucleic acids separated by mini polyacrylamide gels to 8cm x 10cm or 10cm x 10cm membranes. The unit accommodates two cassette sandwiches for simultaneous…

IBI’s PST-50 and PST-51 are four (4) place pipette holders with an additional place for a mechanical pipette filler. These pipette racks are constructed of durable 1/4” cast acrylic for years of reliable use, and the fluorescent orange color will add color to your lab. The PST-50 and…

IBI’s GB-9615 is a 23.5cm (wide) x 15cm (long) UV transmittant Gel Bed for use in the JSB-96 Ultra-Wide Mini Gel-O Submarine system. Ideal for saving agarose when shorter gel runs are sufficient. This Gel Bed mates with the CS-9615 casting fixture for pouring agarose gels. The GB-9615 is…

IBI’s PR-40 and PR-42 have four fluorescent orange angled shelves that ensure your pipettes remain safely in place, while adding a touch of color to your lab. The PR-40 and PR-42’s notched shelves also offer easy access to many different pipette lengths. Depending on the size of the pipette, the…

The unique, undulating motion of The Belly Dancer shaker is designed to provide the optimal movement for tissue culture, staining and destaining gels, Northern, Southern, or Western blotting, and immunoprecipitation. The simple liquid agitation system, consisting of an orbiting platform flexibly…

The GB-3210 is a 15cm (wide) x 10cm (long) UVT gel casting tray for use in the JSB-302 Double-Wide Mini Gel-O Submarine system Ideal for saving agarose when shorter gel runs are sufficient This Gel Bed mates with the CS-3210 casting fixture for pouring agarose gels Constructed of…

The JSB-96 is designed for quick-screening a large number of samples while utilizing a limited amount of agarose (100ml). It is ideal for for PCR RFLP analysis or plasmid screening. The JSB-96 microtiter plate format can run all samples as well as standards and blanks in under 90 minutes. The…

The IBI Belly Bath is a versatile laboratory instrument. The light-weight, fast-heating water bath can be placed on the Belly Dancer platform or run separately on the side of the unit. The microprocessor PID controller has a set point control pad and digital display of actual water temperature. The…