Columns are supplied complete with glass barrel, 2 end fittings with 20 μm porosity HDPE bed supports, and screw caps Each column is also supplied with 5 feet (1.5 m) of FEP PTFE tubing (1/16” OD with 1.0 cm; 1/8” OD with 2.5 and 4.8 cm), 2 flangeless tubing nuts and 2 flangeless…

Three-prong extension clamps hold objects ranging from 0.80 to 89 mm securely and safely. Two separate adjustment screws ensure even, precise pressure on glass to minimize the chance of breakage Clamp is easily adjusted to vary holding angle and distance from the stand Jaws are coated…

Basic column used for many separations in adsorption and ion exchange chromatography. 40-60 micron porosity fritted disc is sealed in Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

Columns are supplied complete with glass barrel, 2 end fittings with 20 μm porosity HDPE bed supports, and screw caps Each column is also supplied with 5 feet (1.5 m) of FEP PTFE tubing (1/16” OD with 1.0 cm; 1/8” OD with 2.5 and 4.8 cm), 2 flangeless tubing nuts and 2 flangeless…

Columns are supplied complete with glass barrel, 2 end fittings with 20 μm porosity HDPE bed supports, and screw caps Each column is also supplied with 5 feet (1.5 m) of FEP PTFE tubing (1/16” OD with 1.0 cm; 1/8” OD with 2.5 and 4.8 cm), 2 flangeless tubing nuts and 2 flangeless…

Aluminum construction to connect tops to flasks Wing nuts or thumb screws are spaced to assure uniform compression for sealing the system

A Standard Taper clamp made of corrosion-free stainless spring wire.

Gravity chromatography column manufactured from medium wall tubing with PTFE stopcock and in-line reservoir for containing liquid buffer Standard Taper joint size 24/40 These gravity columns may be used alone or in combination with 420575-2440 flow control adapter A coarse porosity glass…

Has separate reflux overflow tube Graduated in 1/10 ml divisions from 0 to 1 mL; in 1/5 mL divisions from 1 to 10 mL With 24/40 joints; meets ASTM Standard E 123 Specialized for determination of water in emulsified asphalts With Standard Taper24/40 joints and reflux overflow…

Columns are supplied complete with glass barrel, 2 end fittings with 20 μm porosity HDPE bed supports, and screw caps Each column is also supplied with 5 feet (1.5 m) of FEP PTFE tubing (1/16” OD with 1.0 cm; 1/8” OD with 2.5 and 4.8 cm), 2 flangeless tubing nuts and 2 flangeless…

Lower column fitting with a luer outlet for Disposaflex™ Chromatography Columns. Luer tip only Standard taper joint: 14/20

The narrow annular space of the West design provides high cooling efficiency due to the increased flow rate of the cooling medium. Full length 24/40 joints Standard Taper outer joint at the top and Standard Taper inner drip joint at the bottom Manufactured from 33 expansion, low…

The KONTES® DISPOSAFLEX® column is an inexpensive, multi-purpose column designed to satisfy a wide range of analytical separations using aqueous buffers. A typical application of the Disposaflex® column is the extraction of the cyclic nucleotides cAMP and cGMP from sample preparations…

KIMAX® desiccators are designed and made for durability and efficiency in daily laboratory use. Ideal for removing moisture from solids, storing hygroscopic materials, and applications requiring vacuum desiccation. Can also be used for cooling oven-dried samples while maintaining sample…

Lower column fitting with a luer outlet for Disposaflex™ Chromatography Columns. Includes recess to hold polyethylene bed support or glass wool plug Case of 100

FLEX-COLUMNS® are economical and easy-to-use. Short columns are typically used for ion exchange chromatography, sample desalting and semi-disposable applications, while the long columns are ideally suited for gel filtration and adsorption chromatography. Constructed of polypropylene…

Columns are supplied complete with glass barrel, 2 end fittings with 20 μm porosity HDPE bed supports, and screw caps Each column is also supplied with 5 feet (1.5 m) of FEP PTFE tubing (1/16” OD with 1.0 cm; 1/8” OD with 2.5 and 4.8 cm), 2 flangeless tubing nuts and 2 flangeless…

Apparatus is for determining the proteinaceous nitrogen content in water. It is also useful for preparing small quantities of distilled water. Apparatus can be used for phenol, selenium and fluoride determinations. It has 24/40 Standard Taper joint and a #2 hose connection. Unit measures 595 mm H x…

Standard Taper outer joint at the top Standard Taper inner drip joint at the bottom Hose connections accept 3/8” ID flexible tubing Ref: ASTM Method D322 Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

420300 series are basic columns used for many separations in adsorption and ion exchange chromatography Glass wool (not supplied) is used to support column packing Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

Ideal for use with gel filtration, ion exchange, affinity and adsorption media Economical Easy to use Universal fittings and tubing connections Ideal for use with gel filtration, ion exchange, affinity and adsorption media. Polypropylene reservoirs and column outlets are permanently…

Excellent for storage of hygroscopic chemicals, and to prevent adsorption of moisture when using crucibles, weighing bottles, and watch glasses. Plastic screw-thread top cap for easy cover removal Recessed base for containment of desiccant Includes metal plate Manufactured from…

Snyder distillation column with floating ball valves for improved vapor-liquid contact. Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements.

Useful for refluxing and distillation assemblies. The narrow annular space of the West design provides high cooling efficiency due to the increased flow rate of the cooling medium Medium length Standard Taper joints Condensate is not restricted with this design Manufactured from…

Tightly wound coil provides enough surface area to condense high vapor pressure solvents like hexane. With an internal, coil-type cold finger Standard Taper outer joint at the top, Standard Taper inner drip joint at the bottom 283000 does not have a drip joint Two hose connectors…

Columns are supplied complete with glass barrel, 2 end fittings with 20 μm porosity HDPE bed supports, and screw caps Each column is also supplied with 5 feet (1.5 m) of FEP PTFE tubing (1/16” OD with 1.0 cm; 1/8” OD with 2.5 and 4.8 cm), 2 flangeless tubing nuts and 2 flangeless…

Columns are supplied complete with glass barrel, 2 end fittings with 20 μm porosity HDPE bed supports, and screw caps Each column is also supplied with 5 feet (1.5 m) of FEP PTFE tubing (1/16” OD with 1.0 cm; 1/8” OD with 2.5 and 4.8 cm), 2 flangeless tubing nuts and 2 flangeless…

Gravity chromatography column manufactured from medium wall tubing with 821000 PTFE stopcock Similar in design to the 420530 series 40-60 micron porosity glass frit at the lower end to act as a support for column packing material Replacement stopcock plug is 821001 Manufactured from 33…

Jacketed CHROMAFLEX® columns are provided with an acrylic water jacket to provide thermal control of temperature-sensitive chromatographic separations.  The acrylic jacket also acts as a safety shield.  Threaded Recommended sterilization is with ethylene oxide, 2N NaOH or…