DWK Life Sciences (Kimble), Bottles
-
Aspirator Bottles
DWK Life Sciences (Kimble)With white enamel marking spot Glass conforms to ASTM E438, Type 1, Class A Sizes 250 and 500 mL accept 5/16" I.D. flexible tubing, 1000 mL and larger accept 3/8: I.D. tubing. Kimax glass hose connection outlet is fused to the bottle. 250 mL bottle takes size 2 rubber stopper; 500 mL…
-
Serological Pipet, KIMAX-51, Color-Code, Serialized
DWK Life Sciences (Kimble)Pipet, KIMAX-51, Color-Coded, Serialized Similar to 7464D13 series, but is Class A serialized Pipet has a Safe-Gard tempered tip and meets ASTM specification E 694
-
Beaker Silicone Lid
DWK Life Sciences (Kimble)The reusable KIMBLE® silicone lids stretch easily and adapt to many container sizes, improves lab safety, enhances sample management, offers a more sustainable and cost-effective solution over foils, films and other single-use covers.
-
-
GL 45 Media Storage Bottle Caps
DWK Life Sciences (Kimble)Caps are designed to fit GL 45 threaded ware. Autoclavable Solid top polypropylene Cap colors available in blue, white, orange, gray, green, or pink High-temperature version with red cap available
-
Specific Gravity Bottles, Pycnometers, Medium Length
DWK Life Sciences (Kimble)Special medium length Ts 10/18 thermometer with a range of 14 to 38°C in 0.2° Accuracy within ±0.2°C Cap for the side tube is Standard Taper 5/12 and has small vent near the top Each flask body is numbered for easy identification The 50 mL size is used to obtain the specific gravity of…
-
Serological Pipets, Shorty Glass Pipets
DWK Life Sciences (Kimble)Ideal for use in tissue culture work and other procedures performed under a fume hood or in other confined areas Calibrated to deliver with blow-out Reverse and negative calibrations Sterile Plugged Disposable serological pipets are packaged in color-coded, paper/plastic…
-
Serological Pipet, KIMAX-51, Color-Coded
DWK Life Sciences (Kimble)Pipet, Color-Coded With Fused Scale Made from uniform-bore N51A tubing Designed from ASTM Specification E 1293, Style 1, Class B requirements Graduated between points above Safe-Gard tempered tip 50 mL size is not color-coded; calibrated to deliver Tolerances: 1/10 mL…
-
KIMBLE® Amber Glass Wide-Mouth Packer Bottles, Convenience Packs (Caps Attached)…
DWK Life Sciences (Kimble)Wide-mouth design for efficient addition and removal of contents especially powders and solids Choose from a variety of cap / liner combinations Protection from UV rays and ideal for light-sensitive products Manufactured from soda-lime glass conforming to USP Type III and ASTM E438, Type…
-
Serum Bottles - Heavy-Duty Bottles, Plastic Safety Coated
DWK Life Sciences (Kimble)KimCote® plastic-coated bottle with rounded shoulders. Neck is tooled for a uniform fit with a #8 rubber stopper.
-
Snap Cap No. 5 Cs 6
DWK Life Sciences (Kimble)Replacement snap caps for Class A serialized and certified volumetric flasks. Yellow polyethylene construction Fits Kimble® series 28000, 28008, 28010, 28010K and 28015 Fits flask size 200, 250, 500 mL Case of 6
-
Kimax, Narrow Mouth Solution Bottle With PTFE Stopper
DWK Life Sciences (Kimble)KIMAX bottles conform to ASTM E438, Type I, Class A glass. Bottle necks are ground to accept flathead color-coded PTFE stoppers. Replacement stoppers are 41941.
-
Closure 18-415 0
DWK Life Sciences (Kimble)Closure of one-piece construction with a seal achieved due to a unique inner sealing ring. Intended for use with 73750, 73760 and 73770 disposable culture tubes and 73785 disposable centrifuge tubes. Natural polypropylene Autoclavable Designed from ASTM Specification E982
-
Wide Mouth Packer Bottles With Bagged Caps
DWK Life Sciences (Kimble)Wide mouth design makes it easy to add or remove contents Clear glass allows for easy viewing of contents Amber glass protects light-sensitive contents Type III soda-lime glass Six capacities: 1, 2, 4, 8, 16 and 32 ounces Choice of six liner styles
-
Serological Pipets, Glass Cotton-Plugged, Bagged
DWK Life Sciences (Kimble)Sterile, cotton-plugged, bagged N-51A borosilicate glass; color-coded, graduated scale Designed from ASTM Standard E-714 Tolerances: 1 mL pipet, ±0.02 mL ; 2 mL pipet, ± 0.4 mL ; 5 mL pipet, ± 0.15 mL ; 10 mL pipet, ±0.30 mL Calibrated to tip, for blow-out, 7536S55 pipet is ungraduated below…
-
KIMBLE® Full Length Hex Head Hollow Glass Stopper, 24/40
DWK Life Sciences (Kimble)Hollow, hexagonal head, Standard Taper stopper May be set on the flattened top to avoid contamination of the ground surface Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
-
Specific Gravity Bottles (Pycnometers)
DWK Life Sciences (Kimble)KIMAX® brand, Hubbard-Carmick Used in the determination of specific gravity Conforms to ASTM D 70, D 1963, D 1429 and D 115 for a variety of semi-solid materials and emulsions Conical stopper has 1.6 mm hole to allow air to escape
-
Sedimentation Tube Racks with Leveling Bubbles and Adjustment Screws
DWK Life Sciences (Kimble)10 Place Erythrocyte Sedimentation Rate (ESR) Tube Rack for Westergren and Wintrobe Tubes
-
Snap Cap No. 4 Cs 6
DWK Life Sciences (Kimble)Snap Caps are designed for KIMAX volumetric flasks Yellow polyethylene Caps may not be usable with items lacking necks specially tooled to proper diameters and contours Fits 100mL volumetric flasks
-
-
KIMAX Brand Joint Stoppers
DWK Life Sciences (Kimble)Borosilicate, with penny head Conforms to ASTM Standard E 675 Size Standard Taper 13 has solid plug; size Standard Taper 38 has recessed bottom Standard Taper designation indicates the approximate diameter of the ground zone at its widest (gauging) point.
-
Boston Round Glass Bottles With Bagged Caps
DWK Life Sciences (Kimble)Clear glass allows for easy viewing of contents Amber glass protects light-sensitive contents Narrow mouth design Type III soda-lime glass
-
Bottle Reservoir 2L
DWK Life Sciences (Kimble)KIMAX bottles are graduated with an approximate capacity scale. Bottom outlet is controlled with an 8 mm valve which can be used with 1/4" flexible tubing (not supplied) attached to the quick-release hose barb connector. It may also be used with rigid 1/4" O.D. PTFE tubing with the o-ring…
-
Gray Butyl Rubber Lyophilization Style Stoppers
DWK Life Sciences (Kimble)Designed for aluminum seal finish vials Two-leg style reduces possibility of legs sticking together Gray high grade butyl rubber, lyophilization style
-
-
Black Caps with PTFE-Faced Rubber Liners
DWK Life Sciences (Kimble)Excellent for general laboratory use Specially formulated phenolic resin and liner adhesive to withstand the effects of repeated autoclaving PTFE-faced/general purpose white rubber liners are highly resistant to chemical effects Identified in ASTM Specification E982, Class A requirements
-
Kimax, Solution Bottle With Tooled Top for Rubber Stopper
DWK Life Sciences (Kimble)KIMAX bottles conform to ASTM E438, Type 1, Class A glass.
-
Medium Round AC Bottles Without Caps
DWK Life Sciences (Kimble)Clear glass allows for easy viewing of contents Wide mouth design allows for efficient addition and removal of contents Easy-to-use, versatile storage for solids, liquids, powders and specimens Graduated in both ounces and mL Five capacities: 1, 2, 4, 8, and 16 ounces Type…
-
Cap Weighing Bottle 33 X 24mm
DWK Life Sciences (Kimble)For use with Kimax brand 03-422 Series weighing bottles. Cap-style stopper only Standard taper joint: 29/12 Size: 33 x 24mm
-
Bottle Weighing Tall Plug 30 X 60mm Cs18
DWK Life Sciences (Kimble)KIMAX bottle with a plug-style, closed bottom stopper that fits into an internally ground body. Designed from Federal Specification NNN-B-1493, Type I, Style I requirements Plug-style glass stopper with a closed base fits into the neck of the bottle and seals it to secure contents and…
-
Bottle Aspirator 500ml
DWK Life Sciences (Kimble)KIMAX glass hose connection outlet is fused to the bottle. Accepts 5/16" I.D. flexible tubing With white enamel marking spot Glass conforms to ASTM E438, Type I, Class A
-
Weighing Bottles, Low Form With Glass Stopper
DWK Life Sciences (Kimble)Low Form, KIMAX® Brand (Kimble 15165) Of borosilicate glass, with Standard Taper glass stopper. Bottom part of stopper is sealed. Designed from Federal Specification NNN-B-1493. Dimensions indicated in table are i.d. x height without cap.