KimCote® plastic-coated bottle with rounded shoulders. Neck is tooled for a uniform fit with a #8 rubber stopper.

Closure of one-piece construction with a seal achieved due to a unique inner sealing ring. Intended for use with 73750, 73760 and 73770 disposable culture tubes and 73785 disposable centrifuge tubes. Natural polypropylene Autoclavable Designed from ASTM Specification E982

Special medium length Ts 10/18 thermometer with a range of 14 to 38°C in 0.2° Accuracy within ±0.2°C Cap for the side tube is Standard Taper 5/12 and has small vent near the top Each flask body is numbered for easy identification The 50 mL size is used to obtain the specific gravity of…

KimCote® plastic-coated bottle has enhanced graduations and marking spot is permanent white enamel. This general use bottle is provided with a wide opening (approx. 30 mm ID) GL 45 screw thread and is supplied with linerless autoclavable (121 ºC max) polypropylene blue cap. Bottle design includes a…

Disposable polypropylene vial rack Lettered and numbered for indexing individual tubes Corners interlock for convenient stacking

Pipet, Color-Coded With Fused Scale Made from uniform-bore N51A tubing Designed from ASTM Specification E 1293, Style 1, Class B requirements Graduated between points above Safe-Gard tempered tip 50 mL size is not color-coded; calibrated to deliver Tolerances: 1/10 mL…

Clear glass allows for easy viewing of contents Wide mouth design allows for efficient addition and removal of contents Easy-to-use, versatile storage for solids, liquids, powders and specimens Five capacities: 1, 2, 4, 8, and 16 ounces Type III soda-lime glass

Wide mouth design makes it easy to add or remove contents Clear glass allows for easy viewing of contents Amber glass protects light-sensitive contents Type III soda-lime glass Six capacities: 1, 2, 4, 8, 16 and 32 ounces Choice of six liner styles

Caps are designed to fit GL 45 threaded ware. Autoclavable Solid top polypropylene or open top with membrane A variety of cap colors available Red, high-temperature version made from PBT(polybutylene terephthlate)

Clear glass allows for easy viewing of contents Wide mouth design makes it easy to add or remove contents Square shape bottle maximize shelf storage space Type III soda-lime glass Six capacities: 0.5, 1, 2, 4, 8 and 16 ounces Choice of six liner styles

Designed for aluminum seal finish vials Two-leg style reduces possibility of legs sticking together Gray high grade butyl rubber, lyophilization style

Wide-mouth design for efficient addition and removal of contents especially powders and solids Choose from a variety of cap / liner combinations Protection from UV rays and ideal for light-sensitive products Manufactured from soda-lime glass conforming to USP Type III and ASTM E438, Type…

Bottles come bulk packed in shrink wrapped with caps in bags Clear glass allows for easy viewing of contents Amber glass protects light-sensitive contents Five capacities: 1, 2, 4, 8 and 16 ounces Choice of six liner styles Type III soda-lime glass Narrow mouth design

Sterile, cotton-plugged, bagged N-51A borosilicate glass; color-coded, graduated scale Designed from ASTM Standard E-714 Tolerances: 1 mL pipet, ±0.02 mL ; 2 mL pipet, ± 0.4 mL ; 5 mL pipet, ± 0.15 mL ; 10 mL pipet, ±0.30 mL Calibrated to tip, for blow-out, 7536S55 pipet is ungraduated below…

Color Coded - natural, red, green, yellow and blue

Uses include outgassing NMR tubes, pressure venting or adding reactants via syringe. Hollow, plug-type stopper fits into the neck of the glassware apparatus Sleeve extension fits over the neck for a secure seal Diaphragm can be punctured with a syringe needle Series 774261 may be…

Universal Tube Rack will fit tubes from 10mm to 17mm OD. 25 position with patented inner clamps that keep tubes centered and vertical. This rack is dishwaher safe and can be used for temperatures up to 90°C.

Calibrated "to deliver" N-51A borosilicate glass Not sterilized or cotton-plugged Size 10 mL has constriction near top, forming chamber in which protective cotton plug can be inserted 7536U86 contain five shelf packs of 100 each.

KIMAX bottle with a plug-style, closed bottom stopper that fits into an internally ground body. Designed from Federal Specification NNN-B-1493, Type I, Style I requirements Plug-style glass stopper with a closed base fits into the neck of the bottle and seals it to secure contents and…

Clear glass allows for easy viewing of contents Wide mouth design makes it easy to add or remove contents Square shape bottle maximize shelf storage space Type III soda-lime glass Five capacities: 0.5, 1, 2, 4, and 8 ounces

Plug-style needle closures White Polyethylene Designed for shell vials Economical

Designed for use with 14395 series bottles and 26720 series flasks. Pour rings are made of clear drip-free polypropylene or red ETFE 14395E-452 high temperature ring is recommended for use with 14395H-452 high temperature cap

A tight-fitting, polyethylene cap which stays in place even with a build-up of internal vaporization pressures.

Open top closures with excellent chemical resistance Specially formulated phenolic resin to withstand the effects of repeated autoclaving Linerless Identified in ASTM Specification E982, Class A requirements

General purpose single-hole silicone rubber stoppers. Steam autoclavable Opaque yellowish-white color Silicone stoppers with holes are manufactured from pure silicone rubber

Hollow plug type With sealed bottom and vertical penny head

KimCote® plastic-coated bottles conform to ASTM E438, Type 1, Class A glass.

These stoppers are used as an accessory for microscale threaded Standard Taper 14/10 kits. Pennyhead stopper sizes 10/18 through 19/22 are solid borosilicate glass Sizes 24/25 and larger are hollow borosilicate glass Manufactured from 33 expansion, low extractable borosilicate glass…

An all-glass manifold for connecting inert gas and vacuum sources. Double vacuum gas manifold with vacuum chambers. Fabricated from 1/2" medium wall tubing Stopcocks are 4 mm bore glass with lower vacuum chamber and are spaced 85 mm apart Top right connection is for inert gas and…

Sterile, cotton-plugged, individually wrapped Individually wrapped in resealable plastic bags Borosilicate glass Tolerances: 1/2 mL pipet,± 0.013 mL ; 1 mL pipet, ±0.02 mL ; 5 mL pipet, ± 0.15 mL ; 10 mL pipet, ±0.3 7536T48 pipets have black markings: remaining sizes have blue markings.