Corning, Glass, Bottles
-
Disposable, sterile, PYREX® individually wrapped Calibrated "to deliver" Has negative graduations and fire-polished tips for burr-free, even flow rates Individually wrapped in Steri-View™ wrapping (one side paper, one side plastic) for easier identification and opening
-
PYREXplus® Media Storage Bottles
CorningPatented heavy-duty bottle can be used for storage as well as mixing and sampling. A protective PVC coating helps prevent glass from shattering and reduces spills. Autoclavable (121°C) and resistant to thermal shock. Bottle comes complete with autoclavable, one-piece, teal colored,…
-
Chemical and thermal resistant Graduated Screw cap Bottles are made from PYREX® borosilicate glass for enhanced chemical and thermal resistance. Square bottles are easy to handle, take up less space (13-20%) on the shelf or autoclave and are ideal for mixing, sampling and…
-
PYREX Parr Weighing Bottles
CorningShort length external Standard Taper joints PYREX® Parr weighing bottles are designed for use in weighing small samples. The closure style cap fits over the externally ground body.
-
PYREX Dropping Bottles
CorningRecommended for use in preventing contamination by solubility or pH change With dropping bulb and pipet, Standard Taperground-glass stopper Stopper for 30 mL size is not standard Standard Taper. IMPORTANT: stopper is not covered by Standard Taperspecifications, but ground to…
-
Glass Stoppered Bottles
CorningNarrow mouth PYREX® with glass stopper With ground neck With ground glass stoppers 125 mL and 250 mL bottles are furnished with a number 19 Standard Taper stopper; 500 mL bottles are furnished with a number 24 Standard Taper stopper; 1,000 mL and 2,000 mL bottles are…
-
Sterile, disposable, cotton-plugged, individually wrapped, shorty, PYREX® glass Same pipets as 7536N10 series, but individually wrapped in Corning Steri-View™ pouch Color-coded
-
PYREX® Media Storage Bottles
CorningHeavy-duty media bottle can be used for storage as well as mixing and sampling. Includes linerless, one-piece autoclavable polypropylene plug seal cap with drip free pouring rings. Optional red PBT caps and red ETFE pouring rings are available for dry heat sterilization (180°C). New glass…
-
Wide Mouth Milk Dilution Bottles
CorningSquare bottle facilitates pipet entry and cleaning; wide mouth for ease in measuring and filling With cut-line graduation mark at 99±1 mL Includes phenolic screw cap, size 40-400, with cemented rubber liner Will withstand sterilization (wet at 121°C) Capacity: 160 mL
-
Featuring PYREXplus® protective PVC safety coating May be autoclaved or microwaved to 121°C (250°F) Resistant to thermal shock Similar to 1744F31 series. Borosilicate glass safety bottles provide good optical clarity and are mechanically durable. Can be marked with either…
-
For use with viscous fluids, semi-solid bitumens, emulsions, etc. For ASTM Standards D 70, D 115, D 234, and D 1963; also for AASHTO standards T-43, T-151, and M-125; and ANSI Methods A37.71 and K34.1 Standard taper 24/12 solid stopper, concave on the under side, with central opening 1.6 mm bore …
-
Corning Milk Dilution Bottles
CorningCorning glass milk dilution wide mouth bottle (approximately 28 mm opening) eases the additions of dry solids or liquids. The bottle has a phenolic screw cap with a rubber liner that will withstand wet sterilization (121°C). The bottle meets the requirements for milk dilution bottles stated in…
-
Pipets are color-coded by size for easy identification and sorting. Colored graduations are enameled onto the glass. These “to deliver” pipets must be blown out to obtain total rated capacity. Reference: ASTM E-1044.
-
Bottle Only 500 ml
CorningThese 500mL PYREX® gas washing bottles are replacements for 31760-500EC (5632D58) and 31760-500C (5632D64) These bottles have large hexagonal bases for stability
-
Bottle Gay-Lussac Unadjusted 2ml
CorningThese 2mL PYREX® specific gravity bottles are unadjusted for calibration in the laboratory.
-
Disposable, sterile, PYREX® canister pack Calibrated "to deliver" Packaged in a flip-top canister to keep the pipets racked Sealed in polyethylene bags for sterility
-
PYREX Centrifuge Bottle
CorningHeavy wall Screw cap Particularly useful in handling sputum specimens, this bottle enables digestion, shaking, neutralizing and centrifuging to be performed in one container. The tight-fitting polypropylene screw cap with Teflon® liner reduces the possibility of aerosol escape.
-
Calibrated "to deliver" Large tip opening to allow more rapid intake and delivery of suspensions and viscous materials Color-coded by size for easy identification and sorting Accu-Red graduations are permanently fused into the glass Two rings at the top indicate the pipet…
-
These PYREX® heavy wall centrifuge bottles have beaded necks and use No. 6 rubber stoppers. These bottles have a small bottom area and are designed for use where relatively small amounts of solids are involved, which permits concentration of sediment for decanting operations. Due to the heavy…
-
Bottle Comp 350 C
CorningThese 350mL PYREX® gas washing bottles provide an inexpensive but effective method for washing and drying gases. Sidearm tubulations are 10mm O.D. The side inlet tube on this bottle has a rod sealed to the bottle near the top for extra strength. A 24/40 Standard Taper stopper is used to seal…
-
Pyrex® sterile multi-pack Designed for the larger volume user, these pipets are calibrated "to deliver" and are packed to permit easy access to several pipets at a time without contaminating the entire case Multi-packed plastic bags to ensure sterility Cotton-plugged …
-
These reusable PYREX® pipets are calibrated to Class A tolerances in accordance with ASTM E-542, and ASTM E-1293. Each pipet is individually serialized and supplied with a Certificate of Identification and Capacity, traceable to NIST standards. Calibrated "to deliver" (TD) their total…
-
Specially designed for use in low tissue culture hoods or other confined enclosures The 1, 5 and 10 mL sizes of these pipets are almost 3” shorter than comparable disposable serological pipets The 25 mL size is 5” shorter than most comparable reusable pipets All sizes have…
-
Gas Washing Bottles
CorningFritted disc provides greater efficiency and more uniform dispersion of gas bubbles for complete absorption Tall form, with fused-in fritted disc 20 mm diameter and Standard Taper 40/50 joint Large hexagonal base for stability Tubulation o.d.’s are 8 mm Offered in 125,…
-
Bottle Comp 125C
CorningThese 125mL PYREX® gas washing bottles provide an inexpensive but effective method for washing and drying gases. Bottles have large hexagonal bases for stability Sidearm tubulations are 8mm O.D A 29/42 Standard Taper stopper is used to seal the top to the base These…
-
Disposable, Shorty, PYREX Glass Similar to 7536D49 series, but neither sterilized nor cotton- plugged Markings removed by dichromate cleaning solution
-
PYREX Regular Weighing Bottles
CorningShort length external Standard Taper joints These PYREX standard weighing bottles have an external Standard Taperjoint style opening. The closure style cap fits over the externally ground body.
-
Color-coded Calibrated “to deliver” Graduated PYREX pipets are designed for cotton plugging. The uniform top-end openings permit performing of plugs and allow precise control of liquid column. Color-coded by size for easy identification and sorting. Colored graduations in…
-
Tall Form PYREX® Washing Bottles With fused-on fritted cylinder 12 mm diameter on inlet tube and with Standard Taper 29/42 joint. With glass hooks on both bottle and cap, but without springs. Offered in 250 and 500 mL capacities, in coarse (C) and extra coarse (EC) porosities. 250EC and…
-
PYREX Tall Weighing Bottles
CorningShort length Standard Taper joints Capacities from 7 to 85 mL These PYREX tall form weighing bottles have a Standard Taperjoint style opening that accepts a closed bottom, hollow pennyhead style stopper.
-
Safety Coated Aspirator Bottles
CorningChemically and thermally resistant PYREXplus® borosilicate glass bottles offer good optical clarity and durability PVC coating helps contain glass and contents should breakage occur Autoclavable or microwaveable to 121°C (250°F) Resistant to thermal shock Bottle…
-
PYREX Low Weighing Bottles
CorningShort length external Standard Taper joints PYREX low form weighing bottles have an external Standard Taper joint style opening. The closure style cap fits over the externally ground body.