Corning, Supplies
-
CoolBox™ XT Systems
CorningCorning CoolBox XT systems are bench top cooling workstations that provide sample cooling or freezing without ice, electricity or batteries. CoolBox systems are versatile and accommodate a variety of sample formats and temperatures. The modular design enables the use of CoolRack® and…
-
Breathable film that allows effective gas exchange for cellular/bacterial cultivation while preventing contamination.
-
PYREX® VISTA volumetric flasks provide precise volume measurement. The necks are tooled for Standard Taper glass stoppers. The graduation line is sharp and permanent and large blue block letters make the inscription easy to read. The 1 mL and 2 mL sizes are test tube shaped. These Class A…
-
These PYREX® VISTA™ volumetric pipets are manufactured to Class A capacity tolerances as indicated by ASTM E-969.
-
For user convenience, PYREX Erlenmeyer flasks are graduated to show approximate capacity. The 25- 50- and 125 mL flasks are satisfactory for use as a weighing bottle. Erlenmeyer flasks come with a PYREX Standard Taper stopper.
-
Corning® HYPERStack™ Manifold
CorningThe Corning® HYPERStack™ manifold is made of high quality thermoplastic elastomer.
-
CellBIND Roller Bottles
CorningProvides enhanced cell attachment Polystyrene construction Easy-Grip vent cap Printed lot numbers aid product traceability Corning® CellBIND roller bottles feature a ribbed design that provides twice the surface area with the same exterior dimensions. Bottles are treated…
-
These PYREX® replacement tubes fit the Kuderna Danish Apparatus and have an outer 19/22 Standard Taper joint. The tube graduations go from 0 to 2mL in 0.1mL increments and from 3mL on in 1.0mL increments.
-
Poly-D-Lysine, 20 mg
CorningPoly-D-Lysine, used to culture a wide variety of cell types, particularly neurons, glial cells, and transfected cells. (20 mg) Source: Synthetic Quality: Shown to promote cell attachment and spreading of rat cerebellar granule cells Filtered (0.2 µm membrane) and tested and found negative…
-
Beakers With Handle
CorningCorning 1010 Handle attached by an adjustable, stainless steel strap which fits securely into a shallow groove molded in upper part of beaker Beaker (1530K40) fitted with molded glass handle which facilitates pouring. Replacement beaker (1530K50) supplied without handle or strap.
-
These PYREX® chromatography columns have a reservoir at top and a Product Standard 2mm bore PTFE (Polytetrafluorethylene) plug stopcock at the bottom. The top opening will accept a #2 rubber stopper.
-
0.4 µm or 1.0 µm pore sizes Membrane is treated for optimal cell attachment Large apical and basolateral access ports Products include Transwell unit (1 integral tray with 96 wells), reservoir plate (for cell growth steps), receiver plate (96 wells for growth or assay…
-
PYREX Cylindrical Jars
CorningMold-blown with substantial walls for mechanical strength Rim of 152 mm diameter jars is fine- polished; other sizes have ground rim Can also be used as animal jars Without lids. Capacity and o.d. x height are shown in listings.
-
Corning transfectagro Reduced Serum Medium is designed to maximize the growth of a variety of cell types under reduced serum conditions, generally allowing for at least a 50% reduction in serum use with minimal adaptation. transfectagro has also been proven to improve transient transfection…
-
These disposable 20x125mm PYREX® culture tubes have a round bottom, GPI 18-415 threads and come without a marking spot. They are designed for both tissue culture and general bacteriological work. These tubes hold approximately 24 mL, are made from borosilicate glass, bulk-packed and are sold…
-
A modification of Ham's F-12, F-12K contains higher concentrations of amino acids, sodium pyruvate and other components than the original. It is formulated to support the growth of cells including differentiated rat and chicken cell types and primary human hepatocytes. This medium contains…
-
Aspirator Device,
CorningThe Costar® Aspirator is a device using vacuum to safely and aseptically dispose of supernatant from a variety of laboratory vessels. Includes a hand piece to which disposable pipet tips are attached during use Grommet for accessory attachment and single-channel adapter for…
-
-
Jar 210 X 203 mm
CorningThese 4.7L PYREX® jars are recommended for use as animal jars or for other purposes where resistance to hot air and steam sterilization is of importance. These jars are blown with walls approximately 4.5mm (3/16") thick. The open ends are finished with a
-
96 Well Half-Area Assay Plates
CorningSaves reagents Fits standard readers Polystyrene Unique half-area plates achieve assay miniaturization without using 384 well plates. Half-area plates can help save on rare and expensive reagents by reducing the amount of reagent needed per well, while still retaining the ability to be read in…
-
This is a 1L PYREX® replacement flask with a 29/42 outer Standard Taper joint for the No. 3840-XL 1L extractor system. The tubulation O.D. on the condenser is 10mm.
-
Has low background fluorescence and minimize light scattering Designed to reduce well-to-well crosstalk 360µL total volume Recommended working volume of 75 to 200µL Conforms to standard microplate footprint and dimensions Ulta-Low attachment surface with covalently bonded…
-
These PYREX® long neck shaker culture flasks are basically Erlenmeyer flasks to which a long straight, rimless neck of heavy tubing has been added. The longer necks reduce the amount of splashed solution reaching the closure. They are ideal for shaker cultures. Their uniform wall thickness…
-
PYREX® Hickman Still Head
CorningThis Hickman Still Head is a replacement part for the 6949M series of PYREX® microchemistry kits.
-
These chemically resistant PYREX® keyhole stoppers are made from polytetrafluoroethylene (PTFE) and conform to Standard Taper stopper dimensions. The color-coded keys make sorting and selecting the correct size much faster and easier. These stoppers may be used in place of conventional glass…
-
Unique nitrogen-containing tissue culture surface chemistry Improves attachment, spreading, and growth for many primary cells or cell lines Crystal-grade polystyrene modified by proprietary vacuum gas plasma treatment process Stable, permanent surface modification Optically clear No…
-
Corning BioCoat products come in a variety of pre-coated options and are an ideal solution for enhanced cell attachment and growth of a variety of primary cells and transformed cells in serum-free or serum-containing cultures. Corning offers custom coating capabilities. Disclaimer: This…
-
Cover Glass
CorningManufactured from borosilicate glass with excellent clarity for microscopy use Available in both square and rectangular shapes Choose from three standard thicknesses: - No 1 (0.13 – 0.17mm) - No. 1½ (0.16 – 0.19mm) - No. 2 (0.17 - 0.25mm) Packaged in reclosable plastic boxes for…
-
Promotes neuronal cell attachment and differentiation for a variety of applications Corning® BioCoat™ Poly-D-Lysine/Laminin (PDL/LM) and Poly-L-Ornithine/Laminin (PLO/LM) Cellware is suitable for culturing many different types of peripheral and central nervous system (CNS) networks and is…
-
These PYREX® Erlenmeyer flasks with phenolic screw caps are ideal for use as a shaker flask or for mixing, media prep and storage needs. Impact resistant caps with 24-410 GPI threads are equipped with cemented-in, inert white rubber liners which are resistant to steam sterilization. Their…
-
PYREX® Ten Broeck Homogenizer
CorningThese 40mL capacity PYREX® homogenizers are designed for grinding small samples for pathological and biochemical work. The catch basin bulb has a 55mm outer diameter. Made in accordance with Federal Specification DD-T-363a. It may be used manually but is adaptable for use with a slow speed…
-
Dish 150X20 Pyrx Vista Pk12
CorningThese flat, clear Corning® petri dishes are made from Soda Lime Silica glass and will withstand repeated sterilization (wet or dry). Approximate dish bottom diameter and height is 142x22mm. The edges are beaded to provide greater mechanical strength. The bead also provides a means to equally…