Corning, Equipment
-
-
PC-400D & PC-600D Hot Plates
CorningConserves energy Hot top indicator for safety Two-year warranty Corning® hot plates have a glass-ceramic Pyroceram® top and offer superior performance and reliability in a low profile, space-saving design. Advanced insulation technology conserves energy by keeping heat safely at the top where…
-
This simple PYREX® cold finger condenser, of relatively low efficiency, is often used to regulate refluxing by adjusting the flow of air or water through it (dephlegmation). The tubulation O.D. is approximately 10mm. This condenser has a 24/40 inner Standard Taper joint and is a replacement…
-
These PYREX® homogenizers are designed for use in hand grinding small samples for pathological or biochemical studies. The mortar tubes and pestles are ground to be interchangeable. Clearance between the two parts is approximately 0.15mm. The medium grind provides the required abrasive action…
-
Horizontal Gel Boxes
CorningAxygen horizontal gel boxes are high-quality, full-featured units designed for exceptional durability and efficiency. The gel boxes feature leak-free external gel casting, which allows you to cast one gel outside of the box while another gel is running inside. The units are available in four…
-
These PYREX® Potter-Elvehjem tissue grinders (homogenizers) are used in preparing small samples for pathological and biochemical studies. Homogenization occurs as the sample and buffer are forced through the cylindrical portion of the mortar as the pestle is rotated downward. Mortar is not…
-
Condensers have water-jacketed Standard Taper inner joint. Complete with condenser, flask and extraction tube. The low thermal expansion rate means that the PYREX brand extractors can be routinely used in applications requiring protracted heating at temperatures as high as 230°C. The inherent…
-
Falcon Pipette Controller - St
CorningThe light, ergonomic, motorized pipet controller Designed for use with glass and plastic serological pipets from 0.5 to 100 mL volume ranges. Conveniently positioned switches change operating modes and speeds quickly to handle different liquid volumes and viscosities. Aspirating and…
-
Tubes for general chromatographic analysis Tops are tooled for rubber stopper fit and tubes are fabricated with sealed-in coarse porosity fritted discs Outflow tubes eliminate the smearing of the definition bands of effluent caused by the tube being filled and solvent mixed before being…
-
Features Pyroceram ® top for uniform heating Superb linear control for both heating and stirring Reduced maintenance times and costs “Spill Trough” design channels spills away from electronics and controls. Support rod mount included for attachment of a standard…
-
Lambda Plus Pipettors have been engineered to provide the highest levels of accuracy, reproducibility, and comfort. Lambda Plus Pipettors feature smooth plunger movement and extremely low pipetting forces. Volume can be set by turning either the thumb wheel or the plunger button, and a locking…
-
Multi Position Stirrers
CorningReliable DC motors Available in 4, 5 and 9 position models Stirs at speeds up to 2,000 rpm Stir up to 9 vessels at the same time with these Multi Position Stirrers. The stirrers' magnets and DC motors provide smooth well-coupled stirring up to 2,000 rpm. The speed of all positions on the units…
-
These PYREX® tissue grinders (homogenizers) are recommended for soft tissues found in the liver and brain. They are designed to handle both initial grinding and final homogenization in the same sequence of operations. Mortar is not ground and the pestle contact surface is Polytetrafluorethylene…
-
This is an optional rotor for 6 x 15 mL, 2 x 50 mL and 2 x 15 mL combination, for use with Corning® LSE™ Compact Centrifuge. Features: Maximum Speed: 6,000 rpm/4,387x g Equal G force for all configurations Accepts both conical and round bottom tubes (not compatible…
-
LSE™ 71L Shaking Incubators
CorningThis high performance shaking incubator has a full size glass door and internal light that allows easy viewing of samples without disturbing the chamber contents. Mechanical convection provides a safe, stable temperature environment and fast chamber temperature recovery after opening the door. The…
-
This 10.5L PYREX® desiccators is designed for general analytical work. The large sturdy knob makes the cover easy to handle. Approximate bowl volume is 10,500mL. For replacement cover, see No. 3081-250CO. For lower part only, see No. 3081-250LO. Warning: Not for vacuum applications. Do not heat…
-
PYREX West Condensers
CorningAvailable with 200 or 300 mm long heavy-wall outer jackets PYREX® West condensers are designed with a heavy-wall outer jacket to provide a sturdy, long-lasting unit, while the inner tube has a thinner wall for efficient heat transfer. The tubulations are on the same side to reduce breakage.…
-
Tris Hydrochloride Buffers, 1M
CorningTris-HCl buffer has many applications in molecular biology work, including use in nucleic acid purification. This product can be diluted to obtain the desired concentration. Complete Certificate of Analysis available for each production lot, along with full formulation information. …
-
PYREX Liebig Condensers
CorningSuitable for refluxing, extracting and distilling operations With Standard Taper 24/40 drip tip joint at bottom All sizes take stopper size 3
-
LSE™ Digital Microplate Shakers
CorningThe Corning LSE Digital Microplate Shaker features digital control of shaking speed and run time. A single control knob is used to set parameters, and values are shown on a large 3-digit display. A sturdy base encloses the motor for quiet, vibration-free operation. The included stainless steel…
-
Hot Plate Accessories
CorningAccessories and replacement parts are available for Corning hot plates, stirrers and hot plate/stirrers including 230V Euro-style power cords, 120V power cords, and a 100V power cord.
-
Lambda™ EliteTouch™ Starter Kit
CorningCorning Lambda EliteTouch Starter Kit contains 4 variable volume pipettors in the most popular and universal volumes (0.5-10 µL, 2-20 µL, 20-200 µL, and 100-1000 µL), pipet stand for 4 pipettors, 3 racks with tips, and accessories. Cat. No. 6051 Lambda EliteTouch…
-
LSE™ Digital Dry Bath Heaters
CorningThe Corning Digital Dry Bath Heaters are available in single, dual, and four block configurations and provide a broad temperature range up to 150°C, which makes them useful for a variety of applications in molecular biology, histology, clinical, environmental, and industrial laboratories. They…
-
This Air Reflux Condenser is a replacement part for the 6949M series of PYREX® microchemistry kits.
-
PYREX Cloud & Pour Test Jars
CorningFor ASTM D-97, D-1500, D-2500 Cylindrical with flat bottom, beaded rim and marking spot Height 121 mm; o.d. 35 mm With graduation ring 51 mm from bottom
-
Carbon Residue Coking Bulb
CorningRamsbottom PYREX® For determination of carbon residue left on evaporating oil Meets ASTM D 524
-
Single Block, 24 x 0.5 ml tubes
CorningThis is a single block, 24 x 0.5 mL tubes, for use with Corning® LSE™ Digital Dry Bath.
-
The Corning LSE Low Speed Orbital Shaker includes a 30 x 30 cm platform and is ideal for staining and destaining gels, washing blots and general mixing applications. Speed can be set from 3 to 60 rpm and the timer can be set for up to 2 hours or for continuous operation. Ideal for staining…
-
These PYREX® extra coarse porosity fritted thimbles are designed for use in PYREX® Soxhlet extractors when it is desirable to weigh the material extracted or where paper thimbles may be attacked by the chemicals used. For PYREX® extractors and extraction apparatus, see Nos. 3740 through 3880. .
-
PC-200 Series Hot Plates
CorningSuperb linear control Minimum heat up times Low-profile; requires less space Meets testing standards for electrical safety Temperature range: 25 to 550°C Features Pyroceram® top for uniform heating Improved design offers sealed electronics which protect the unit and reduce maintenance costs.…
-
LSE High-Speed Microcentrifuge
CorningFast acceleration to a maximum speed 13,300 rpm/16,300 x g Complete with easy access, 24 x 1.5/2.0 mL aluminum rotor Precise, digital control system Set and view rotor speed in rpm or g-force Quiet and cool running, even at maximum
-
These PYREX® coarse porosity fritted thimbles are designed for use in PYREX® Soxhlet extractors when it is desirable to weigh the material extracted or where paper thimbles may be attacked by the chemicals used. For PYREX® extractors and extraction apparatus, see Nos. 3740 through 3880.