Corning 96-Well Cell Culture Plates
-
Falcon® Cell Culture Inserts
CorningTrack-etched PET membranes have a smooth surface and defined cylindrical pores that traverse the membrane Low protein binding PET membrane Sterilized by gamma irradiation A wide variety of configurations including 6, 12, and…
-
96-well deep well microplate with round wells. Working volume is 1.64 mL.
-
Raised well rims Comes with high binding, TC-treated or non-treated surface Built to proposed industry standard footprint These solid black and white, opaque polystyrene plates are tested on a lot-to-lot basis for capacity and low fluorescent/ luminescent background. Plates have…
-
15mm Netwell™ Inserts
CorningThese 15mm diameter Netwell inserts have polyester mesh bottoms attached to polystyrene inserts They are used as tissue carriers, supports and strainers for culture of small organs, tissue slices or explants at the air-media interface Handy carriers are available for immunocytochemical staining…
-
White wall plates are designed to reduce well-to-well crosstalk during luminescent assays Recommended working volume of up to 20 to 80uL Enhanced flatness provides low intra- and inter- plate CV’s Nonbinding (NBS) surface is a Corning proprietary treatment technology used on…
-
Tinted amber for light-sensitive assays These standard height lids are made of cyclic-olefin which is 100% DMSO-resistant. Lids are nonsterile and do not fit Corning 2 µL 1536 well microplates.
-
Axygen® 384 well PCR microplate, white, is designed to fit Roche Light Cycler 480. Ultra-thin and consistent wall thickness allows precise thermal transfer for optimum results. Includes Ultra Clear sealing film and printed alphanumeric grid for ease of well identification. Features …
-
Each well contains one 4µL round bottom protein well and one 100µL reagent reservoirLow volume reagent reservoir saves on reagent costsDesigned for sitting drop vapor diffusion high throughput protein crystallizationManufactured from an advanced Cyclic Olefin Copolymer (COC) with high resistance to…
-
96 Well Half-Area Assay Plates
CorningSaves reagents Fits standard readers Polystyrene Unique half-area plates achieve assay miniaturization without using 384 well plates. Half-area plates can help save on rare and expensive reagents by reducing the amount of reagent needed per well, while still retaining the ability to be read in…
-
Stacked plates can be easily separated Working volume up to 1.5 µL Extra wells can be used as controls Treated or untreated versions available Low volume microplates are primarily suited for the immobilization of large molecules, such as antibodies, that have large…
-
Spheroid Microplates
CorningWith their novel and proprietary design, these microplates are ideal for generating and analyzing 3D multicellular spheroids in the same microplate. The Ultra-Low Attachment (ULA) surface enables uniform and reproducible 3D multicellular spheroid formation. The black opaque microplate body shields…
-
Transwell Receiver Plate
CorningAccessory to 96 well system Not treated Easy pipet access An accessory for the HTS Transwell®-96 Permeable Support system and has 96 individually isolated wells that are not treated (for cell attachment) and sterile. Receiver plate is for use in cell growth or assay steps of an experiment and…
-
10 µm thick translucent polycarbonate membrane Sterilized by gamma radiation Treated to optimize cell attachment Membrane must be stained for cell visibility Transwell cell culture inserts are easy-to-use permeable support devices for the study of both…
-
Axygen® deep well and assay plates are used for sample collection, in vitro growth chambers and long-term storage. Made of polypropylene, they offer excellent chemical resistance and will withstand temperatures down to -80°C. 550 µL deep well plate ANSI/SLAS 1-2004:…
-
The Corning FluoroBlok Insert System is made with a unique light-tight PET membrane that effectively blocks the transmission of light from 400-700 nm. Fluorescence from labeled cells or compounds present in the top chamber of the insert system is blocked from detection in the bottom chamber by the…
-
Product is an accessory for the HTS Transwell®-96 Permeable Support system Plate is treated for optimal cell attachment For use in cell growth or assay steps of an experiment Used for luminescent evaluation When used with HTS Transwell®-96 unit, the plate allows for convenient…
-
Treated or non-treated surface models Black or clear versions Can be used for both top and bottom reading instruments 96 Half-Area Well microplates are available in a range of configurations. Bottoms are 60% thinner than conventional polystyrene plates resulting in lower background fluorescence…
-
Axygen® deep well and assay plates are used for sample collection, in vitro growth chambers and long-term storage. Made of polypropylene, they offer excellent chemical resistance and will withstand temperatures down to -80°C. Features 2.2mL deep well plate ANSI/SLAS…
-
0.4 µm or 1.0 µm pore sizes Membrane is treated for optimal cell attachment Large apical and basolateral access ports Products include Transwell unit (1 integral tray with 96 wells), reservoir plate (for cell growth steps), receiver plate (96 wells for growth or assay…
-
For use as reservoir tray with HTS Transwell Permeable SupportsTC-Treated for cell attachmentSame footprint as standard 24 well plate but with single rectangular wellSterilized by gamma radiation.
-
384-Well Microplates
CorningThree models Reduces well-to-well crosstalk Model 6906F03 features a high binding surface that binds medium (>10kD) and large biomolecules that possess ionic groups and/or hydrophobic regions. Designed to reduce well-to-well crosstalk during fluorescent assays, its binding capacity is…
-
Has 636cm² cell growth area Ultra Low Attachment surface features a covalently bound hydrogel layer that effectively inhibits cellular attachment and minimizes protein absorption, enzyme activation, and cellular activation Surface is non-cytotoxic, biologically inert, and nondegradable …
-
Designed for in vitro diagnostic assays. Flat bottom strips are designed to easily break apart and may be used in an "egg-crate" style strip holder that allows each individual well to be positioned back into the plate once broken. High binding surface binds medium (>10kD) and large biomolecules…
-
Round well design with a solid black flat bottom2.8 mm distance between well bottoms to plate bottomValidated by Molecular Devices for the FLIPR reader. Outer wells aligned for proper viewing with FLIPRIdeal for miniaturized 384 well fluorescent homogeneous assaysNot treated (or medium binding)…
-
Well, Plate
CorningCorning® Special Optics 96 Well Microplates have black walls with ultra thin, clear bottoms for sharp, clear images and minimal background in fluorescent assays Designed to reduce well-to-well crosstalk during fluorescent assays Can be used for both top and bottom reading instrument …
-
A solution for automated, high throughput cell-based studies of chemotaxis, migration and invasion Increase cell migration and invasion assay productivity with simplified fluorescence detection and real-time analysis Simplification of chemotaxis, cell migration, and invasion assays …
-
Stripwell™ Low Volume Microplates are designed with one-half the well area of a “regular” 8-well strip, providing a much greater surface to volume ratio.Low volume wells have recommended working volume of 50 to 125µLDesigned for in vitro diagnostic assaysFlat bottom strips…
-
96 Well Half-Area Assay Plates
CorningSaves reagents Fits standard readers Polystyrene Unique half-area plates achieve assay miniaturization without using 384 well plates. Half-area plates can help save on rare and expensive reagents by reducing the amount of reagent needed per well, while still retaining the ability…
-
Axygen® deep well and assay plates are used for sample collection, in vitro growth chambers and long-term storage. Made of polypropylene, they offer excellent chemical resistance and will withstand temperatures down to -80°C. Features 5.0mL deep well plate with rectangular…
-
0.4 µm membrane pore size 10 µm thick transparent polyester membrane TC-Treated surface for optimal cell attachment 24 mm Transwell Polyester Membrane Inserts are convenient, easy to use permeable support devices for the syudy of both anchorage-dependent and…
-
Poly-D-Lysine (PDL) and Poly-L-Lysine (PLL) are synthetic compounds that enhance cell adhesion and protein absorption by altering surface charges on the culture substrate. In addition to promoting cell adhesion, poly-lysine surface treatments support neurite outgrowth and improve the survival of…