Chemglass, Condensers, Nucleic Acid Sample Preparation
-
Liebig Condensers
ChemglassCondenser has a standard taper outer joint at the top and a lower inner drip tip joint. Hose connections have an O.D. of 10mm at the middle serration.
-
Reflux Condensers
ChemglassCoil style reflux condenser with tightly wrapped coil providing maximum cooling. Excellent for use with high vapor pressure solvents. Condenser has a top outer standard taper joint and lower inner drip tip joint. Hose connections have an O.D. of 10mm at the middle serration.
-
Reflux Condensers, Double Cooling
ChemglassHigh efficiency reflux condenser employs a double surface area with a cooling finger sealed into the secondary cooling jacket. Serrated hose connections for water connection extend through the outer bulb and have an O.D. of 10mm at the middle serration. The jacket length is 200mm. PLEASE NOTE:…
-
Reaction Vessel
ChemglassLIDS, REACTORS, 6-NECK FOR 57MM OD REACTION VESSEL BODY, EQUIVALENT TO METTLER EASYMAX, Reaction Vessel Lid, 6-Nk, for 57mm OD Reactor Body: 14/20 Outer CN, (3) 14/20 Outer SN's, and (2) 10/18 Outer SN's; Equivalent to Mettler Easymax® Part # 51161619Mettler Easymax® is a…
-
Allihn Condensers, Static Waterless
ChemglassStatic Waterless Allihn style reflux condenser with a standard taper outer joint at the top and a lower inner drip tip joint and GPI thread on side for filling the condenser with ethylene glycol. Supplied with open top cap and septa for closing off once the condenser is filled. No issues with…
-
Coil Condensers
ChemglassFor use in construction of spiral or Graham style CONDENSERSs. Coils can be sealed together to form longer lengths.
-
Condensers, Graham, Gas Scrubber
ChemglassCondenser for use in cooling of the scrubbing fluid. Graham coil type condenser having 1/2" Swagelok® tubing for use with CG-1975-20 compression fitting. Overall length is ~350mm with effective length of 250mm. Hose connections have 9mm OD small serration and a 10mm OD large serration.
-
Coil style reflux condenser with a larger diameter jacket and coil, thereby providing maximum cooling capacity, while being shorter in length. Hose connections are on the bottom of the condenser which makes it easier to connect hose/tubing. Connections are GL14 polypropylene hose barbs and screw…
-
High Efficiency Condensers
ChemglassThis unique design combines some of the best features for refluxing in a single condenser. Coolant, introduced into the upper hose connection, fills a large cold finger that is wrapped with coils. After the coolant travels through the coils, it enters the water jacket to maximize cooling surface…
-
Friedrichs condenser similar to CG-1210 but with detachable hose connections. Connections are made of polypropylene and provide a safe and easy way of connecting and disconnecting flexible tubing to the condenser. Hose connections have an O.D. of 8mm and an I.D. of 4mm. Supplied complete with two…
-
Gooseneck Distilling Condensers
ChemglassUnique one-piece distilling condenser is actually a 75° adapter, highly efficient coil condenser and vacuum adapter in a compact one-piece unit. Available with a choice of three sizes of condensers with uptake inner joint as listed. Top thermometer joint is a 10/30 outer for use with a 3in…
-
Allihn style reflux condenser similar to CG-1206 but with detachable hose connections. Connections are made of polypropylene and provide a safe and easy way of connecting and disconnecting flexible tubing to the condenser. Hose connections have an O.D. of 8mm and an I.D. of 4mm. Supplied complete…
-
Reaction Vessel
ChemglassOne-Piece Reaction Vessel, 5-Nk, 50mL: 19/22 Outer CN, (1) 10/18 Outer SN, (1) 14/20 Outer SN, and (2) 19/22 Outer SN's. Vessel is graduated from 10 to 50mL. Body outside diameter is 43mm. Equivalent to Mettler EasyMax 102/402 Part # 5116172.Mettler Easymax® is a registered trademark…
-
Condensers, Dewar Type
ChemglassCondenser has a large opening at the top for use with dry ice/acetone or liquid nitrogen. Condenser has a lower inner drip tip joint and hose connections with an O.D. of 10mm at the middle serration. NOTE: See CG-4519 For Solvent Recovery Traps used with Rotary Evaporators.
-
Condenser, Reflux
ChemglassCoil style reflux condenser with a larger diameter jacket and coil, thereby providing maximum cooling capacity, while being shorter in length. Hose connections are on the bottom of the condenser which makes it easier to connect hose/tubing. Jacket has a O.D. of 41mm while the coil O.D. is 8mm.…
-
CONDENSERSS, AIR REFLUX, MINUM-WARE® CONDENSERSS, WATER-JACKETED, REFLUX, MINUM-WARE® ADAPTERS, CLAISEN HEAD, MINUM-WARE®, Supplied complete with open-top screw cap (MW-102-22) and PTFE faced silicone septa (MW-104-12). HICKMAN STILL HEADS, MINUM-WARE®
-
Reflux condenser similar to CG-1213-A but with detachable hose connections. Connections are made of polypropylene and provide a safe and easy way of connecting and disconnecting flexible tubing to the condenser. Hose connections have an O.D. of 8mm and an I.D. of 4mm. Supplied complete with two…
-
Coil style reflux condenser with a large diameter jacket and coil, similar to CG-1213-L but with detachable hose connections. Connections are made of polypropylene and provide a safe and easy way of connecting and disconnecting flexible tubing to the condenser. Supplied complete with two GL open…
-
Condenser, ''CR'' Assembly
ChemglassTwo piece cold trap style condenser for use with rotary evaporators. Condenser has a 45/40 lower inner drip joint, a 19/38 stopcock plug, and removable hose connections using GL-14 threads. Condenser is supplied complete with PTFE centering ring along with plastic caps and serrated hose…
-
Reflux Condensers, Coil Type
ChemglassSimilar to CG-1213, but having a larger diameter jacket and coil, thereby providing maximum cooling capacity, while being shorter in length. Jacket has an O.D. of 41mm while the coil O.D. is 8mm. Excellent for use with high vapor pressure solvents. Condenser has a top outer standard taper joint and…
-
Allihn Condensers
ChemglassAllihn style reflux condenser with a plain tubulation at the top and a lower inner drip tip joint. Hose connections have an O.D. of 10mm at the middle serration.
-
Condenser, Double Coils
ChemglassHigh efficiency double coil condenser, similar to a rotary evaporator condenser but with 45/50 joints. Condenser has an O.D. of 80mm and is 400mm overall length. Coolant connections are made using removable hose connections with GL-14 threads. Supplied complete with two polypropylene hose…
-
Glassblowers Friedrich Condenser Blank
ChemglassMolded inner cold finger for use in fabrication of Friedrich style condensers. Overall length is 230mm with an outside diameter of 45mm. NOTE: TOP IS UNFINISHED.
-
Friedrichs Condensers
ChemglassCondenser has a specially formed spiral inner tube providing a long vapor path, ensuring good heat transfer and anti-flooding characteristics. Condenser has a standard taper outer joint at a 15° angle to the condenser and a lower inner drip tip joint. Hose connections have an O.D. of 10mm at…
-
Micro Cold Finger Condensers
ChemglassCondenser for use in refluxing from 1 to 20mL of solvent in flasks having a capacity of 5 to 50mL. Minimal surface area provides for better yields while providing adequate cooling. The additional hose connection is provided to allow introduction of an inert gas such as nitrogen. Top hose connection…
-
Condenser, "B" Assembly
ChemglassDouble coil condenser for use with rotary evaporators for cooling with tap water in a vertical position. Condenser has a 45/40 lower inner drip tip joint, a 29/32 top outer joint, and removable hose connections using GL-14 glass threads. Condenser is supplied complete with plastic caps and serrated…
-
Liebig Condensers
ChemglassSmall scale Liebig condenser with a standard taper outer joint at the top and a lower inner drip tip joint. Hose connections have an O.D. of 10mm at the middle serration.
-
Cold Finger Condensers
ChemglassCondenser has an inner joint and a sealed lower drip tip for drop control. Hose connections have an O.D. of 10mm at the middle serration.
-
Coil Condenser Inserts, Type "C"
ChemglassInsert allows the coversion of a "C" type dry ice condenser for use with either tap water or a chilled circulator. Inlet and outlet are GL-14 threads and supplied complete with caps and detachable hose connections. Also supplied with a PTFE centering ring.
-
Reflux Condensers, Coil Type
ChemglassReflux condenser with the coolant circulated through the inner coil instead of through the jacket as in the Graham style condenser. Condenser has standard taper top outer and lower inner drip tip joints. Hose connections have an O.D. of 10mm at the middle serration.
-
Reflux Condensers
ChemglassReflux condenser having an internal coil that is water jacketed. Vapors are condensed both on the coil and the inner wall of the jacket. The top end has a standard taper outer joint and the lower end has an inner drip tip joint. Hose connections have an O.D. of 10mm at the middle serration.
-
Two piece cold trap style condenser for use with rotary evaporators. Condenser has a 50mm flange on the side, a 35/20 lower ball joint, a 19/38 stopcock plug and removable hose connections using GL-14 threads. Condenser is supplied complete with PTFE centering ring along with plastic caps and…