Bellco Glass, General Lab Products
-
Silicone Headplate O-Ring 3L #254
Bellco GlassSilicone headplate o-ring for 3l bioreactor systems. Size: 254 Material: red silicone rubber Dimensions: od x id: 5.762?x 0.139? thick Size: #254
-
Impeller Assembly 25mL
Bellco GlassGlass shaft impeller assembly for 1967-style hanging bar spinner flask. Consist of ptfe magnet holder and ptfe coated magnet. Glass shaft ptfe magnet Size: 25ml
-
Bellco Heating Blanket 115V-1L 75 Watt
Bellco GlassHeating blankets are designed to be used with a temperature controller and rtd temperature sensor for heating media inside a vessel to temperature. Male iec connector for use with temperature controllers Heating at 5 watts/sq.in. Flask size: 1l Watts: 75 Dimension (in.): 1 x 14 1 latch 6 ft…
-
Round Bottom Marine Impeller 8L
Bellco GlassDimensions: 1/2? od x 12 1/2? long Stainless steel 4? od right hand pitch marine prop & e-clip Material: 316l stainless steel with electropolish finish For round bottom omni vessel (1964-88405) Need l/f head plate, over head drive motor Size: 8l
-
Large Flange Omni Paddle 36L
Bellco GlassBlades and impeller assemblies are use for cell culture. Reduces shear in delicate cell culture. Manufactured from 316l stainless steel with electropolish finish. Ra 32 finish or better inside and out. Blade dimension: 5 3/4 x 2?. Shaft oal: 17?. Constructed of 316l electropolished stainless steel…
-
Stainless steel curved harvesting tube for 15l round bottom omni vessels. Manufactured from 316l stainless steel with ra finish of 32 micro inch or better inside and out electropolish finish. Size: 15l Dimensions: 1/2" x .430 x 22"
-
3-Port Sparger Assembly w/ Holes 15L
Bellco Glass316-l stainless steel ra32 or better finish .040? drilled holes sparger for low profile vertical side arm vessels. Threaded end is removable for cleaning. Comes with 45mm blue polypropylene open top cap and silicone gasket. Triple tube configuration with vent, fill/sample and sparge.
-
Round Bottom Marine Impeller 15L
Bellco GlassDimensions: 1/2? od x 12 1/2? long Stainless steel 4? od right hand pitch marine prop & e-clip Material: 316l stainless steel with electropolish finish For round bottom omni vessel (1964-88405) Need l/f head plate, over head drive motor
-
Stainless Steel 2- Port Assembly 500mL 100mm
Bellco GlassAll port assemblies are manufactured from 316l stainless steel and have an electropolish finish. 2- port assemblies have siphon and vent tubes. 3-port assemblies have siphon, fill tube and vent tubes. All port assemblies include a 45mm blue polypropylene screw cap and white silicone gasket. Size:…
-
Heating blankets are designed to be used with a temperature controller and rtd temperature sensor for heating media inside a vessel to temperature. Male iec connector for use with temperature controllers Heating at 5 watts/sq.in. Flask size: low profile 3l & 6l vessel Watts: 190 Dimension (in.): 2…
-
Large Flange O-Ring Only 200mm
Bellco Glass200 mm large flange 0-ring for use with SST flange clamp. 200 mm 0-ring Red silicone rubber construction
-
Glass Ball Impeller Only 6-8L
Bellco GlassGlass ball houses a magnet for gentle agitation of micro-carrier beads and has a 70mm cap. Specially formed bottom indent prevents accumulation under the impeller. Cap size: 100mm Size: 6-8l
-
Large Flange Round Bottom Vessel 7L
Bellco GlassHeavy walled construction for cell culture and fermentation applications. Heavy duty o-ring flange creates positive seal for stainless steel head-plate. For use with stainless steel head-plate, o-ring, and locking clamp. Use with CellTrol ii only single or dual systems, and speed control modules.…
-
Thermowell Assembly 6L
Bellco GlassThermowell assemblies are used to hold inside one tube the rtd temperature sensor that monitors the temperature within the vessel in conjunction with a temperature controller. There are also tubes for addition of media and vent tube Thermowell assemblies for 1965 and 1967-style angled sidearm…
-
Micro-Carrier Impeller Assembly 15-36L
Bellco GlassImpeller assembly for micro-carrier spinner flasks. Consist of magnet holder, silicone plug, magnet, and ptfe paddle. Impeller size: 15-36l Paddle dimensions: 3"x 10"
-
Metal Stone Sparger 5L For Flat Bottom Omni Vessels
Bellco GlassMetal stone sparger 5l for flat or round bottom omni vessels. Sparger inserts through stainless steel headplate fitting. 4 1/2?wide x 12? long 316 l stainless steel ra 32 finish or better Stainless steel frit
-
3-Port Sparger Assembly w/ Frit 15L
Bellco Glass316-l stainless steel ra32 or better finish 10 micron porosity stainless steel frit for low profile vertical side arm vessels. Frit is removable for cleaning. Comes with 45mm blue polypropylene open top cap and silicone gasket Triple tube configuration with vent, fill/sample and sparge.
-
3-Port Sparger Assembly w/ Frit 8L
Bellco Glass316-l stainless steel ra32 or better finish 10 micron porosity stainless steel frit for low profile vertical side arm vessels. Frit is removable for cleaning. Comes with 45mm blue polypropylene open top cap and silicone gasket Triple tube configuration with vent, fill/sample and sparge.
-
Metal stone sparger 36l for flat or round bottom omni vessels. Sparger inserts through stainless steel headplate fitting. 4 1/2?wide x 24? long 316 l stainless steel ra 32 finish or better Stainless steel frit
-
Process Micro-Carrier Insect System 3L 115v
Bellco GlassDesigned for growing insect cell cultures such as sf9 and sf21 cells. The system comes complete with all accessories needed to grow your insect culture line for expression. Consist of: 7785-p2005 process 5-position magnetic stirrer, 115v 1965-03000 micro-carrier spinner flask complete, 3l…
-
Bellco Heating Blanket 230V-36L-HW 1200 Watt
Bellco GlassHeating blankets are designed to be used with a temperature controller and rtd temperature sensor for heating media inside a vessel to temperature. Male iec connector for use with temperature controllers Heating at 5 watts/sq.in. Flask size: 1200 - not to be use with CellTrol Watts: 1200 Dimension…
-
Low Profile 3-Port Sparger w/ Frit 6L
Bellco Glass316-l stainless steel ra32 or better finish 10 micron porosity stainless steel frit for low profile vertical side arm vessels. Frit is removable for cleaning. Comes with 45mm blue polypropylene open top cap and silicone gasket Triple tube configuration with vent, fill/sample and sparge.
-
Stainless Steel 2-Port Assembly 500mL 70mm
Bellco GlassAll port assemblies are manufactured from 316l stainless steel and have an electropolish finish. 2- port assemblies have siphon and vent tubes. 3-port assemblies have siphon, fill tube and vent tubes. All port assemblies include a 45mm blue polypropylene screw cap and white silicone gasket. Size:…
-
Stainless Steel 2-Port Assembly 36L
Bellco GlassAll port assemblies are manufactured from 316l stainless steel and have an electropolish finish. 2- port assemblies have siphon and vent tubes. 3-port assemblies have siphon, fill tube and vent tubes. All port assemblies include a 45mm blue polypropylene screw cap and white silicone gasket. Size:…
-
Glass Ball Impeller Only 250mL
Bellco GlassGlass ball houses a magnet for gentle agitation of micro-carrier beads and has a 70mm cap. Specially formed bottom indent prevents accumulation under the impeller. Cap size: 70mm Size: 250ml
-
-
Straight Harvesting Tube 11.5L 1/4"
Bellco GlassMaterial: 316l stainless steel with ra finish of 32 inch or better, inside and out Dimensions: odxid:1/4? x 5/32? x 11.5" long
-
-
English threads Fits into 3/8" holes in headplate material 316l SST with electropolish finish - ra 32 finish inside & out Inside dimensions: .250" od x 19 1/4" overall length insertion length: 18" with hose barbs supply with SST nut & o-ring
-
2-port air stone stainless steel sparger assembly is designed for the sparging of gases into the vessel liquid media. This design allows access through the side arms with a screw on cap assembly. Fully autoclavable. Sparger assembly for 6l l/p over head drive vessel Fits thru a 45mm sidearm 316l…
-
Digital Micro-Carrier Insect System 3L 230v
Bellco GlassDesigned for growing insect cell cultures such as sf9 and sf21 cells. The system comes complete with all accessories needed to grow your insect culture line for expression. Consist of: 7785-d2015 digital 5-position magnetic stirrer, 230v 1965-03000 micro-carrier spinner flask complete, 3l…
-