The Agilent Technologies cell support is an ideal accessory to have in any chemical laboratories, research facilities, manufacturing industries and pharmaceutical factories. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Agilent provides a range of supplies for the PSD 100/120 programmable sample Dispenser used with Agilent GFAAS systems, including sample vials, beakers, adapters, dispensing capillary assemblies, dispensing syringe and replacement plungers. This product is only available to U.S. Domestic…

Agilent tubing and tubing assemblies are fully compatible with your PerkinElmer FIMS/FIAS systems, so you can be confident that they will integrate seamlessly with your PerkinElmer system. Application: For Sample Tubing, for-FIMS-100, FIMS-400, FIAS-100, or FIAS-400 This product is only…

Agilent burner system components for PerkinElmer PinAAcle/Aanalyst AA instruments are designed to provide the best precision, efficient drainage, minimal burner blockage, and reduced interferences. Application: Burner System Components for PerkinElmer AAnalyst 100/200/300/400/700/800 & PinAAcle …

A number of different autosamplers have been used with Agilent AA, ICP-OES, MP-AES and ICP-MS instruments, depending on the specific model. This includes the Agilent SPS 4 used with current instruments, and the SPS 3 or ASX 500 Series used with earlier model instruments. Each model autosampler is…

The Agilent Technologies high sensitivity nebulizer is made from an alloy of platinum and iridium and offers good resistance to corrosion. This nebulizer can be used on a variety of inorganic acids and organic solvents. Application: For PinAAcle, PerkinElmer AAS Instruments This product is only…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Technologies fluoroelastomer O-ring is suitable for use with Mark IV and Mark VI spray chamber. Application: For Mark IV & Mark VI Spray Chamber This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Technologies 1.14 mm peristaltic pump tubing consists of a two-stop design and the marprene construction provides more flexibility and endurance. Application: For AS-93plus/S10 Autosampler This product is only available to U.S. Domestic Customers. For research use only, not to…

Agilent top-quality ICP-OES peristaltic pump tubing allows you to find the appropriate product to handle any matrix. Agilent has tubing in the diameters and material required for your application: PVC, Solvaflex, FPM, or Marprene. Standard PVC works for all aqueous with medium concentrated acids or…

The Agilent Technologies spray chamber assembly is useful for the analysis, diagnostics, calibration and monitoring of various chemical samples in laboratories and research facilities. This product is only available to U.S. Domestic Customers. For research use only, not to be used in…

Graphite shrouds for graphite furnace Atomic Absorption. Regular replacement of the shroud is recommended. A shroud in good condition will help ensure optimum performance and maximize tube life. Application: For Agilent GTA 95/96/97/100/110 This product is only available to U.S. Domestic…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Technologies two stage pressure regulator is suitable for use with chromatography or spectrometry system models. Application: For Argon This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

A separate hydride module should be used exclusively for Hg determinations to reduce cross contamination. Application: For VGA 77 This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The Agilent Technologies complete cell and window is compatible to use with cells and Hg lamps in any PerkinElmer instruments. Application: For FIMS-100/400, PerkinElmer FIMS/FIAS This product is only available to U.S. Domestic Customers. For research use only, not to be used in…

Agilent burner system components for PerkinElmer PinAAcle/Aanalyst AA instruments are designed to provide the best precision, efficient drainage, minimal burner blockage, and reduced interferences. Application: For Plastic Body Nebulizers, PinAAcle Series AA Systems This product is only…

Agilent tubing and tubing assemblies are fully compatible with your PerkinElmer FIMS/FIAS systems, so you can be confident that they will integrate seamlessly with your PerkinElmer system. Application: For PerkinElmer FIMS/FIAS This product is only available to U.S. Domestic Customers. …

Agilent mixing/separation assembly, mixing block and gas/liquid separator for PerkinElmer FIMS/FIAS systems are equivalent to genuine mixing/separation assembly, mixing block and gas/liquid separator for PerkinElmer FIMS/FIAS systems. With these supplies you can be confident that it will integrate…

The Agilent Technologies fluorinated liquid trap kit is suitable for use with chromatography or spectrometry system models. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent burner system components for PerkinElmer PinAAcle/Aanalyst AA instruments are designed to provide the best precision, efficient drainage, minimal burner blockage, and reduced interferences. Application: Burner System Components for PerkinElmer AAS Instruments, AAnalyst…

The Agilent Technologies O-ring has inner diameter of 1/8 Inch and is ideal for seal plug in end cap assembly. It is suitable for PinAAcle and AAnalyst 100/200/300/400/700/800, PerkinElmer AAS nebulizers & burner systems. Application: For Seal Plug in End Cap Assembly, For Metal Body Nebulizers,…

Agilent mixing/separation assembly, mixing block and gas/liquid separator for PerkinElmer FIMS/FIAS systems are equivalent to genuine mixing/separation assembly, mixing block and gas/liquid separator for PerkinElmer FIMS/FIAS systems. With these supplies you can be confident that it will integrate…

The Agilent Technologies autosampler sampling capillary assembly is suitable for use with PSD 120 programmable sample dispenser. Application: For PSD 120 Programmable Sample Dispenser (Used With Graphite Furnace AA), Sample Tubing This product is only available to U.S. Domestic Customers. …

The Agilent Technologies 1 Liter constant pressure head bottle comes in a rectangular shape and provides an ideal storage option for liquid samples. It is compatible to use with SIPS 10/20 sample introduction pump system. This product is only available to U.S. Domestic Customers. For…

Agilent graphite platforms and tubes for PerkinElmer THGA and HGA graphite furnace AA systems are batch tested to ensure they our demanding performance requirements for contamination, sensitivity, precision, electrical resistance, and lifetime. Application: For HGA 900/850/800/700/600/300 Furnaces…

Agilent adapters with internal thread, adapters with external thread, and connectors for PerkinElmer FIMS/FIAS systems are equivalent to genuine adapters and connectors for PerkinElmer FIMS/FIAS systems. You can be confident that these adapters will integrate seamlessly with your PerkinElmer…

The Agilent Technologies flame shield with viewing window is designed to safeguard the user in case of any eruption of unduly fire. Viewing window allows the user to see through the contents. This product is only available to U.S. Domestic Customers. For research use only, not to be used…