Ace Glass Specialty Flasks
-
Thomas Nos. 1165M15, 1165M16, 1165M17, 1165M18, 1165M19, 1165M20, 1165M21 Jacketed cylindrical flask with flush seal and beaded pipe²inlet and outlets. The flask is graduated on both sides²which allows for either left or right hand orientation.²Features a Schott-Duran style o-ring…
-
Instatherm & reg; round bottom flask designed to operate at up to 360 degrees C. Never run dry or above max voltage ratings. Includes a 9698-20 connecting controller cord.
-
Ace Glass Freeze Drying Flask
Ace GlassComplete fast-freeze flask with snap-on rubber cap and 1/2-inch or 3/4-inch O.D. plain or valve adapter, compatible with all major brand freeze drying manifold valves. Borosilicate flasks are designed for ease of handling, faster loading. Uniform wall weight maximizes heat transfer while…
-
Jacketed, spherical reaction flask with Duran flat flange and o-ring groove, for use with our 6517 Quick Release clamp. Bottom outlet features an Easy-Action plug controlling the 28/15 o-ring ball joint outlet. Jacket inlet/outlets are available with either tangentially sealed o-ring ball joints…
-
Reaction Assembly, Portable, 12 and 22L
Ace GlassComplete self-supporting pilot plant assembly. Needs only to be located near coolant and electrical outlet. When not in use, entire assembly can be intact, without breakdown. Features flask, self-standing mechanical or air motor, flat-sided powder funn
-
Reaction Flask, Removable Stopcock
Ace GlassWith 4mm bore stopcock for rapid removal of contents without disturbing the general arrangement of the apparatus. Stopcock is separated from lower section by 28/15 joint. Neck opening is standard 10.2cm (4"). For joint clamp, order 7669-12. Use 6496 Cl
-
Borosilicate glass, round bottom reaction vessel. Supplied with 24/40 center neck and two 24/40 side necks. Fourth neck is #25 Ace-Thred on 500 mL for use with 7506-10 Bushing and O-Ring; #36 Ace-Thred on 1000 mL and 2000 mL sizes for use with 7506-12 Bushing and O-Ring to make a leak-tight…
-
Flask, Tapered Wall
Ace GlassWalls tapered inward toward the bottom to allow continuous operation with smaller volumes. Flasks supplied with joint on center and two side necks. The four and five neck versions have one or two #7 Ace- Thred necks to accomodate thermometers and elect
-
Bench scale, 1000 - 6000mL, Clean-In-Place sprayer for use with either pressurized or vacuum assisted flask washing. All PTFE construction. Four, 3 inch sections with available extenders allow flexibility. Ace recommends that the sprayer ball be positi
-
Head, Duran Flange
Ace GlassFlat ground flange for use with all Reaction Flasks that have a 100mm (4") Duran ground mating flange. Supplied with three in line ground joints and one or two 90 degree joints. For thermometer or probe adapter, see our 5028 series. For clamp, see 6517.
-
Determines CO2 evolution to assess biodegradability by soil and sewerage micro-organisms. Shake flask fits standard laboratory shakers. #7 Ace-Thred side port with Nylon bushing and FETFE O-ring holds a glass septum adapter. Inner well has a capacity of 10 mL plus head space. Well is held securely…
-
Coupling, Reaction Flask
Ace GlassKF style flange clamp for our 200mm (8 in), 300mm (12 in) and 400mm (16 in) kilo scale reactor vessels. The 200 & 300mm clamps are manufactured of black, phenolic resin while our 400mm clamp is black, powder coated aluminum. Purchase the clamp and appropriate gasket separately. We recommend the…
-
Scale-Up Series™ Bench-Top Reactor
Ace GlassAce Glass Scale-Up Series™ plain bench-top reactor base system includes the essential items needed to begin building a customized reactor specifically for your application. Reactors scale-up from 100mL to 6000mL on the bench and their geometry tr
-
Flask
Ace GlassRound bottom, cylindrical sides. Useful in many Mini-Lab Assemblies. Can also be applied to many other applications in the laboratory where a wide-mouthed flask of small capacity is desired. Available with 45/50 joint polished.
-
Flask, Two Necks, Pear-Shaped
Ace GlassPear-shaped, with side arm for use with 9095 rubber thermometer adapter. Joint is 14/20.
-
-
Flask, Reaction, Spherical, Plain
Ace GlassRugged spherical reaction flask with Duran, flat, ground flange with O-Ring groove, for use with 6517 Quick Release Clamp. Each flask is supplied with one CAPFE O-Ring (PTFE encapsulated silicone O-Ring). Plain silicone O-Rings are also available. For reaction heads, see 6528, 6529 or 6530. For…
-
Rugged cylindrical reaction flask with Duran, flat, ground flange with O-Ring groove, for use with 6517 Quick Release Clamp but with indents for greater agitation. Each flask is supplied with one CAPFE O-Ring (PTFE encapsulated silicone O-Ring). Plain silicone O-Rings are also available. For…
-
Round bottom, indented Morton Type, three neck flask. 500ml and 1L sizes have angled side necks while larger sizes feature vertical necks. Available in heavy wall. Indents enhance agitation during stirring.
-
Rugged spherical reaction flask with Duran style flat flange with O-Ring groove, for use with 6517 Quick Release Clamp. Various valve and bottom fitting configurations available, see individual listings. each flask includes a CAPFE (PTFE encapsulated silicone) O-Ring. Plain silicon O-Rings are also…
-
Cylindrical pilot plant reactors providing portable, self-contained reaction system for research and production purposes. Systems available in 10L, 30L and 50L plain or jacketed capacities with a variety of domed or flat reaction heads. Ask us to build
-
Jacketed reaction flask with round bottom. Flat flange is grooved for using an o-ring (instead of a flat gasket) to seal to a head. Jacketed for temperature control of ingredients. Supplied with CAPFE o-ring. Codes -01 thru -04 have 28/15 o-ring ball joints on inlet/outlet. Codes -301 thru -304…
-
Cylindrical, heavy wall reaction flask with flat ground flange. Sides are indented for better mixing of ingredients. Uses 6508 or 6510 clamp style. Fits reaction heads see 6512, 6513 & 6515.
-
Fully jacketed, european style flasks with tapered walls and shallow bottoms for more efficient half-moon shaped paddle stirring. Jacket has hose connection inlet/outlet. Available in three necks or 5 neck version featuring two #7 Ace-Thred joints with
-
Instatherm Reaction Flask and Head
Ace GlassRugged cylindrical reaction flask and head with Duran, flat, ground 4" flange with O-Ring groove and integral heating element that eliminates the local superheating commonly associated with more conventional heating methods and eliminates cumbersome and dangerous oil baths. Response is rapid and…
-
Round bottom, borosilicate flask with two necks and a side port with either a 2mm glass stopcock or a 0-3 Inlet valve. Excellent flask for reactions and NO-AIR or vacuum applications. Side port is available with either a 2mm glass stopcock or a 0-3 Inlet valve with 8mm end for use of a rubber septa.
-
Rugged spherical reaction flask with Duran, flat, ground flange with O-Ring groove, for use with 6517 Quick Release Clamp but with indents for greater agitation. Each flask is supplied with one CAPFE O-Ring (PTFE encapsulated silicone O-Ring). Plain silicone O-Rings are also available. For reaction…
-
Flask, Single Neck, Pear Shaped
Ace GlassPear-shaped, single neck, heavy duty flask. Available with ground, polished and cap-seal joints. The cap-seal flasks are used in the Ace microscale chemistry product line and feature a 14/10 ground joint with external threads. Supplied with a holed cap
-
Head, Filter Reactor
Ace GlassReactor head, 60mm o-ring groove flange with (3) in-line 24/40 joints. Use with our 6384, 6386 and 6388 reactor bodies.
-
Kriel Reactor, Photochemical
Ace GlassReactor is most useful in prep-scale photolysis and features tapered sides which assures full submersion using our 7825-34 or 7825-36 lamps within the supplied quartz immersion well. A 20% savings in reaction time over round bottom flasks. Additionally
-
Heavy wall cylindrical reaction flask with Duran grooved flange opening. Flask has Zero Dead Space, (ZDS), bottom valve. The valve features no material hang-up in the fully open position. When closed, the valve seats flush with the bottom of the flask. Includes one CAPFE o-ring. See Ace 6517 for…
-
Reaction Flask, Spherical, Jacketed
Ace GlassSpherical, jacketed reaction flask with 100mm (4") flat flange top. Jacket inlet/outlets available with either tangentially sealed 28/15 o-ring ball joints or with Ace-Thred connections. Use 6496-10 clamp to secure head to flask.