Ace Glass Lab Flasks
Benchmark BenchPress 2024 - Promos & Lab Favorites
Shakers, Incubators, Centrifuges, Balances, Rotators,
Vortexers, Dry Baths, Rockers and MORE!
Download the promotional brochure below learn more.
Benchmark BenchPress 2024 Promotional Brochure
Offers expire July 31, 2024
-
Similar to 9843-04 Vessel except jacketed to provide active cooling from tap water or mechanical cooler. Jacket is cylindrical with flat bottom for greater stability. With #25 Ace-Thred center neck and two 14/20 side necks. Code -27 includes our 7506-10 #25 Ace-Thred bushing used to secure a…
-
Flask, Erlenmeyer, Stopper Top
Ace GlassErlenmeyer flask with included stopper top. No graduations.
-
Reaction Flask Head, #7 Ace-Thred
Ace GlassHeads with four necks, three inline standard taper joints and one perpendicular #7 Ace-Thred™ thermometer joint. Included 5029 nylon bushing & FETFE o-ring permits vertical adjustment of 6-7mm OD thermometers. Use with our 6504,6511 & 6516 reaction vessels that feature either a 137 x 100mm ID…
-
-
Round bottom, single neck flask with either a beaded tube end port or a beaded tube end well. Well I.D. on 6935-03 thru 6935-17 is approximately 9.5mm. Well I.D. on 6935-64 thru 6935-78 is approximately 9mm.
-
Gasket, Reaction Flask
Ace GlassFlat gaskets for sealing two flat ground glass surfaces. Plain flat or grooved PTFE gaskets reduce breakage and make an effective seal. Our flat, exclusive FETFE gasket provides a leak-free seal with slight clamp pressure. These are designed especially for use with our conical or flat ground flange…
-
Equilibration Flask
Ace GlassDesigned by Dr. H.R. Krouse, University of Calgary, for use in H2O18/H2O16 determination. Unique design eliminates the use of grease or breakseals in CO2 recovery. Water samples are introduced by pipet into bulb by removing PTFE plug. After reinstating plug, degassing of water and CO2 is…
-
Similar to 9833-05 Vessel except jacketed to provide active cooling from tap water or mechanical cooler. Jacket is cylindrical with flat bottom for greater stability. With #25 Ace-Thred center neck and three 14/20 side necks. Code -35 includes our 7506-10 #25 Ace-Thred bushing used to secure a…
-
Flask, Two Necks, Vertical
Ace GlassTwo neck, one center and on vertical side neck, round bottom flask with standard taper joints. Available in standard wall or heavy wall.
-
Head, Duran Flange
Ace GlassProduct family consisting of large spherical flasks and the heads that complement them. Flasks that feature a bottom outlet have descriptions that state the outlet's type, otherwise the flask has no outlet.
-
Flask, Two Necks, Angled
Ace GlassRound bottom with outer joints and side neck angled. Available fabricated with heavy walls, approximately 30% heavier than regular wall flasks.,/p>
-
-
Cell culture shake flask with three outside edge baffles. Baffles are deeper than standard flask to enhance mixing and oxygen transfer to media. Flask has a long style neck to accomodate either plastic or stainless steel closures.
-
Used for limit test for arsenic as described in European Pharmacopeia, 1997, page 51. Complete consists of 125mL conical flask with 24/40 joint, a capillary chimney with a pulled tip below 24/40 joint at bottom, #5 O-Ring joint at top with hooks for 3/4" springs, and an adapter tube with #5 O-Ring…
-
Distillation Apparatus, Cyanide
Ace GlassApparatus for converting simple and most complex cyanides into HCN and for from most interferences before measuring by titration or colorimetric analysis examination of industrial wastes and other water. Method is described in Standard the Examination of Water and Wastewater. Fourteenth Edition,…
-
Flask Reaction, Hi-Vac Valve NO-AIR
Ace GlassRound bottom borosilicate glass flask with standard taper center neck and a 0-4 Hi-Vac valve for precise control. Flask is ideal for simple NO-AIR and vacuum applications. Outlet arm is 8MM and can be fitted with a rubber septa for insertion of samples or additives via syringe.
-
Flask, Round Bottom, Four Neck
Ace GlassRound bottom flask with four necks arranged 3 in-line and one 10/30 joint at 90 degrees. The 500ml size has angled side necks while all other sizes feature vertical necks. Available in heavy wall.
-
Flask, Round bottom, Two Neck
Ace GlassRound bottom, two neck flask. Side neck is angled. Available in standard wall for more rapid heating or heavy duty for mechanical shock resistance.
-
-
Flask, Erlenmeyer
Ace GlassErlenmeyer flask, wide mouth with beaded lip to resist chipping. 10 and 25mL capacity, used to carry out reactions or to hold items such as 9581 Craig Tube in microscale work.
-
For exhaustive distillation of pesticides and industrial chemicals from water, sediments and tissue, and the simultaneous extraction of the distillate by a small volume of organic solvent. The addition of a bulb condenser in place of the straight tube condenser results in more efficient condensing…
-
Flask, Rotary Evaporator, Large
Ace GlassRotary evaporation flasks available plain, poly-coated or ambered. Poly-coating has a maximum temperature of 100 degrees C and can withstand acid and solvent splashes but not soakings. Small flange is 90mmod,67mmid and 18mm thick. Medium flange is 100mmod,72mmid and 19mm thick. Large flange is…
-
Trypsinizing Flask, Baffled, Beaded Neck
Ace GlassTrypsinizing flask with beaded neck and long side baffles. Ideal for converting homogenous tissue samples into cell suspensions by digestion of connective tissue. Heavy beaded neck accepts either cotton plugs or stoppers. The extra-deep baffles enhance vigorous agitation.
-
Flask, Tapered wall, Five Neck, Jacketed
Ace GlassFully jacketed flask with sharply tapered walls which allows for continuous operation with smaller volumes. Jacket has hose connection inlet/outlet. Supplied with nylon bushings and fetfe o-rings.
-
Head, Duran Flange
Ace GlassFlat ground flange for use with all Reaction Flasks that have a 100mm (4") Duran ground mating flange. Supplied with three in line ground joints and one or two 90 degree joints. For thermometer or probe adapter, see our 5028 series. For clamp, see 6517.
-
Round bottom flask with a 0-4mm Hi-Vac valve top with a 9mm side port designed to accept 3/8in Cajon fittings. The valved top gives the researcher precise flow control.
-
Flask, Rotary Evaporator/Freeze Drying
Ace GlassDual purpose flask features the TWISTLOR ACE-Seal: simply push adapter head and flask together, turn 90 degrees. Flange on flask has two ground-flats opposite each other that allow Nylon retainers on adapter head to pass over. O-Ring positioned in head
-
Flask, Round Bottom, Four Neck
Ace GlassRound bottom flask with four necks arranged 3 in-line and one at 90 degrees. 500ml and smaller flasks have angled side necks while larger sizes feature vertical necks. Available in heavy wall.
-
Flask Single Neck, Side Arm, No-Air
Ace GlassRound bottom flask with single neck with standard taper joint and a 8mm side outlet with either a 2mm glass stopcock or a 0-3 inlet valve. Ideal for Schlenk lines and either NO-AIR or vacuum applications. Includes one 9096-32 septa for side arm.
-
Reaction Assembly, Portable, 12 and 22L
Ace GlassComplete self-supporting pilot plant assembly. Needs only to be located near coolant and electrical outlet. When not in use, entire assembly can be intact, without breakdown. Features flask, self-standing mechanical or air motor, flat-sided powder funn
-
Distillation Apparatus, Cyanide
Ace GlassCyanide distillation apparatus used in testing for soluble and insoluble cyanides in water. Apparatus basically conforms to ASTM D-2036 except for modifications involving Ace-Threds and larger joints. Also available with threaded adapter to connect still head to trap. PTFE ferrules are supplied in…
-
Heavy wall, bottle shaped, filtering flask with removable polypropylene hose connection. Offered plain or plastic coated. Order 6989-40 for replacement hose connection assembly consisting of PBT hose connection, EPDM o-ring, VMQ silicone seal, PP screw