Ace Glass Lab Flasks
-
Reaction Flask, Spherical
Ace GlassRugged spherical flask with neck opening of 4" (10.2cm). Standard size flasks use regular Glas-Col heating mantles of equivalent capacity. Length of straight section including flange, approximately 9.5cm (33/4 "). Uses 6496 Clamp for securing flask hea
-
-
Hydrogenation/Gas Apparatus I
Ace GlassParr Model 3911 Hydrogenation unit for working volumes of 1ml to 200ml . Ace-thred vessels replace rubber stoppered vessels and eliminate cross-over contamination caused by leeching or sample retension. Complete unit includes all adapters needed for the supplied 8648 series bottles…
-
Distillation Apparatus, Cyanide
Ace GlassCyanide distillation apparatus used in testing for soluble and insoluble cyanides in water. Apparatus basically conforms to ASTM D-2036 except for modifications involving Ace-Threds and larger joints. Also available with threaded adapter to connect still head to trap. PTFE ferrules are supplied in…
-
Flask, Single Neck
Ace GlassRound bottom flask with short neck and outer joint. Available in standard and heavy wall. Heavy wall approximately 30% heavier than standard wall. Used by glassblowers in fabricating single or multi-necked flasks.
-
With 24/40 standard taper joint at top and side hose connection.
-
Cylindrical form, silvered and evacuated. Furnished with an aluminum base. Exterior, including base, is coated with a tough, resilient, baked-on plastic which does not rupture if flask breaks. Intended for use with liquid nitrogen. Performance is not g
-
Reaction Assembly, Portable, 12 and 22L
Ace GlassComplete self-supporting pilot plant assembly. Needs only to be located near coolant and electrical outlet. When not in use, entire assembly can be intact, without breakdown. Features flask, self-standing mechanical or air motor, flat-sided powder funn
-
Nephelo Flask, Baffled, Screw Cap
Ace GlassNephelometer type culture flask with angled cuvette side arm and side clean-out port. Flasks have three outside bottom baffles to promote mixing and oxygen transfer to media. Flasks come with 18-415 side port phenolic cap and 38-430 phenolic top cap. The side arm fits all standard Nephelometers and spectrophotometers.
-
Flask, Round Bottom, Three Neck
Ace GlassRound bottom flasks, three vertical necks, standard taper outer joints, standard and heavy wall. Flasks feature a flare-out directly below the center joint to facilitate cleaning and removal of stir blades.
-
New design jacketed receiving flask. Fits all rotary evaporators. Outer jacket has 28/15 o-ring ball joints to seal to chiller hoses. Has an SVL thread vent cap on side joint. Bottom DN25 ball joint has CAPFE o-ring. Jacket inlet and outlet ball joints have FETFE o-rings.
-
Round bottom flasks, three vertical necks, spherical outer joints. Available in standard and heavy wall.
-
Gasket, Reaction Flask
Ace GlassFlat gaskets for sealing two flat ground glass surfaces. Plain flat or grooved PTFE gaskets reduce breakage and make an effective seal. Our flat, exclusive FETFE gasket provides a leak-free seal with slight clamp pressure. These are designed especially for use with our conical or flat ground flange…
-
Round bottom pressure flask, with either #15 or #25 PTFE plug seal top opening. This style also has a side thermowell port to facilitate a thermometer or a temperature probe to measure flask temperature without losing the pressure integrity of the vess
-
Rugged spherical reaction flask with Duran style flat flange with O-Ring groove, for use with 6517 Quick Release Clamp. Various valve and bottom fitting configurations available, see individual listings. each flask includes a CAPFE (PTFE encapsulated silicone) O-Ring. Plain silicon O-Rings are also…
-
Benchtop Reactor, All-in-one, Jacketed
Ace Glass1L or 2L jacketed general purpose bench top reactor system supplied complete with everything necessary for operation. The system is designed so that all wetted surfaces are glass and PTFE for maximum chemical compatibility. A small overall stand footprint and flexible drive shaft combination allow…
-
Reaction Flask Head, #7 Ace-Thred
Ace GlassHeads with four necks, three inline standard taper joints and one perpendicular #7 Ace-Thred™ thermometer joint. Included 5029 nylon bushing & FETFE o-ring permits vertical adjustment of 6-7mm OD thermometers. Use with our 6504,6511 & 6516 reaction vessels that feature either a 137 x 100mm ID…
-
Flask, Two Necks, Vertical
Ace GlassTwo neck, one center and on vertical side neck, round bottom flask with standard taper joints. Available in standard wall or heavy wall.
-
Borosilicate glass, round bottom reaction vessel. Supplied with 24/40 center neck and two 24/40 side necks. Fourth neck is #25 Ace-Thred on 500 mL for use with 7506-10 Bushing and O-Ring; #36 Ace-Thred on 1000 mL and 2000 mL sizes for use with 7506-12 Bushing and O-Ring to make a leak-tight…
-
Flask, Recovery, Rotary Evaporator
Ace GlassA multipurpose, round bottom flask with a single neck and sloping side wall. Designed for use as a recovery flask with rotary evaporators. Heavy wall product family members feature approximately 30% heavier wall weights. Microscale versions, codes -43
-
Flask, Recovery, Rotary Evaporator
Ace GlassA multipurpose, round bottom flask with a single neck and sloping side wall. Designed for use as a recovery flask with rotary evaporators. Heavy wall product family members feature approximately 30% heavier wall weights.
-
Round bottom,single neck,all PTFE boiling flask. Maximum temperature 260 degrees C.
-
Flask, Heidolph Laborota
Ace GlassLarge receiver/evaporator flasks for use with Heidolph 20L rotary evaporators. Flasks are fabricated from blanks selected for balance and quality with carefully welded necks to provent "rotational whip". Receiver flask has a polished 40/25 joint, side neck is a GL-18 thread with solid cap. Bottom…
-
Flask, Round Bottom, Ace-Thred Side Port
Ace GlassRound bottom, single neck flask with Ace-Thred side port supplied with our 5029-10 nylon bushing and 7855-704 FETFE o-ring. Bushing is ideal for use with thermometers or bleed tubes of up to 7mm OD. Available in standard and heavy wall versions.
-
Distillation Apparatus, Markham Still
Ace GlassUsed for volatile fatty acid test; ASTM D-1076. Fabricated from standard wall tubing throughout. Hose connections on still are size D; on condenser, size C.
-
Rugged cylindrical reaction flask with Duran, flat, ground flange with O-Ring groove, for use with 6517 Quick Release Clamp but with indents for greater agitation. Each flask is supplied with one CAPFE O-Ring (PTFE encapsulated silicone O-Ring). Plain silicone O-Rings are also available. For…
-
Flask, Round Bottom, Ace-Thred Side Port
Ace GlassRound bottom, single neck flask with Ace-Thred side port supplied with our 5029-10 nylon bushing and 7855-704 FETFE o-ring. Bushing is ideal for use with thermometers or bleed tubes of up to 7mm OD. Available in standard and heavy wall versions.
-
Shake style cell culture flask with beaded neck and three outside edge extra deep baffles. The extra deep baffles further enhance the mixing and oxygen transfer with the media.
-
Fernbach style culture flask with 38mm long style straight neck to accomodate plastic or stainless steel closures, see Ace 3917 & 3918 product families. Flat bottom, no baffles. Caution! Do not place on direct heat source.
-
Flask, Round Bottom, Four Neck
Ace GlassRound bottom flask with four necks arranged 3 in-line and one at 90 degrees. 500ml and smaller flasks have angled side necks while larger sizes feature vertical necks. Available in heavy wall.
-
Flask, Volumetric, Pilot Plant
Ace GlassLarge volumetric flask with joint and flat bottom. Available with or without graduation mark. See 8255-18 and 8255-20 for 34/28 and 40/35 stoppers.
-
Flask, Rotary Evaporator/Freeze Drying
Ace GlassDual purpose flask features the TWISTLOR ACE-Seal: simply push adapter head and flask together, turn 90 degrees. Flange on flask has two ground-flats opposite each other that allow Nylon retainers on adapter head to pass over. O-Ring positioned in head