Valutek’s disposable microporous lab coats are manufactured with 100% non-linting microporous film bonded with a non-woven fabric that provides superior barrier protection against non-toxic particulates, liquids, spray and dust. The lab coats are highly breathable and provide great operator…

Valutek’s disposable microporous coveralls are manufactured with 100% non-linting microporous film bonded with a non-woven fabric to provide superior barrier protection against non-toxic particulates, liquids, spray and dust. All coveralls have a flap over zipper closure, elastic wrist, and…

Valutek nitrile powder free ambidextrous 9.5” glove is constructed from 100% clean synthetic nitrile polymer, contains no rubber latex, fillers, or silicones and has a beaded cuff and textured fingertip design. Our specially formulated, high modulus nitrile provides unmatched operator comfort…

Valutek’s PE-coated polypropylene non-skid shoe cover is manufactured with a polyethylene coated outer layer and a non-linting, non-woven spunbond polypropylene inner layer with stitched seams and elastic ankle cuffs. The shoe cover has a durable skid-resistant embossed PVC sole design and…

Valutek’s disposable cross-linked polyethylene shoe covers are manufactured with 100% cross-linked polyethylene with heat-sealed seams. These shoe covers are strong, durable, and impervious to liquids. Available in lightweight, standard weight, and heavy weight. All Valutek shoe covers are…

Valutek’s polyethylene film adhesive roller is manufactured with polyethylene and acrylic solvent based adhesive sheets. The perforated sheets allow for removal after use, providing a new surface area for the next application. A bactericide is used to prevent microbial growth. All Valutek…

Valutek’s 2-Ply ultrasonic sealed polyester wiper is constructed from 100% continuous filament polyester in a 2-ply double-knit, no-run, interlock pattern with ultrasonic sealed edges. This wiper is ultraclean and highly absorbent with critically low levels of particulate and extractable…

Valutek nitrile powder-free ambidextrous 12” glove is constructed from 100% clean synthetic nitrile polymer and contains no rubber latex, fillers or silicones. This glove comes with beaded cuff and a textured fingertip design. Our specially formulated, high modulus nitrile provides unmatched…

Valutek’s disposable SPP beard cover is manufactured with 100% non-linting, non-woven, spunbond polypropylene fabric, which provides comfortable operator protection. The beard cover has a filament covered, unexposed elastic band for secure fit and closure. All Valutek beard covers are tested…

Valutek’s spunbond polypropylene disposable lab coats are manufactured with strong, lightweight, breathable, 100% non-linting, non-woven, spunbond polypropylene fabric. The lab coats are knee length with 5 snap closures, elastic cuffs, and a single ply shirt collar design. These lab coats do…

Valutek’s disposable anti-skid SPP shoe cover is manufactured with 100% non-linting, non-woven spunbond polypropylene fabric with stitched seams and sprayed latex anti-skid treads on the bottom for safety. The shoe covers are lightweight, strong, and durable. All Valutek shoe covers are…

Valutek’s 12” ambidextrous disposable latex powder-free glove is constructed from 100% natural rubber latex with fully textured design and beaded long cuff. This glove provides high-level dexterity, is strong, reliable, durable, and comfortable hand protection for operators. Packaged in…

Valutek’s 12” ambidextrous sterile nitrile cleanroom glove is constructed from 100% synthetic nitrile polymer. This glove contains no natural rubber latex, is silicone free and has a textured fingertip design with beaded long cuff. This glove is packaged in a cleanroom compatible…

Valutek’s cleanroom tubular polyester floor mop head is manufactured with 1/2” knitted tube, made of 100% white filament polyester in a spaghetti style looped to form edgeless tubular strands to absorb and encapsulate liquids for maximum sorptive capacity. The knitted fabric is…

Valutek’s disposable microporous hood is manufactured with 100% non-linting microporous film bonded with a non-woven fabric. This provides superior barrier protection against non-toxic particulates, liquids, spray and dust while the hood has high breathability to ensure operator comfort. All…

Valutek’s low texture microfiber wiper is constructed from a blend of 75% continuous filament polyester and 25% nylon in a double-knit, no-run interlock design, with ultrasonic sealed edge. Laundered and packaged in a cleanroom, all Valutek wipers are tested and manufactured in ISO compliant…

Valutek’s twill-patterned cotton wiper is constructed from 100% tightly woven long stable cotton. The fabric of this wiper is bias-cut and has a cross section of 120 x 60 threads per square inch. This wiper is clean and durable with high heat resistance. All Valutek wipers are tested and…

Valutek’s 30lb cleanroom paper is specially formulated with cellulose fiber surrounded and bonded by a polymer impregnated substrate. The special formulation minimizes particulate and ink smearing. This also provides the paper with high tear and tensile strength but with ultra low levels of…

Valutek’s disposable nitrile powder-free finger cots are constructed from 100% clean, synthetic nitrile polymer, contains no rubber latex, fillers or silicones. With a smooth finish and beaded edge. The finger cots are inherently static dissipative. Packaged in a controlled environment, all…

Valutek’s disposable latex powder-free black finger cots are constructed from 100% natural rubber latex, rolled with a smooth finish, and have a beaded edge. The finger cots offer a consistent conductive level and are primarily used where static charge is a major concern. Packaged in a…

Valutek’s disposable 3-ply polypropylene face mask is constructed from non woven pleated, 7” x 3½” rectangular, glass-free polypropylene material with a malleable flat aluminum noseband. Available in both floss-covered round elastic ear-loops and head band design. All…

Valutek’s disposable coated polypropylene sleeves are constructed from lightweight, strong, durable polyethylene-coated spunpond polypropylene fabric with a non-latex elastic cuffs design. The polyethylene coating offers great liquid protection. All Valutek sleeves are tested and manufactured…

Valutek’s nylon knit wiper is constructed from 100% continuous filament nylon in a double-knit, no-run, interlock pattern. This clean and absorbent wiper offers excellent softness and superior strength. Laundered and packaged in a cleanroom, all Valutek wipers are tested and manufactured in…

Valutek’s laser sealed polyester wiper is constructed from 100% continuous filament polyester in a double-knit, no-run, interlock pattern with a laser sealed edge. This wiper is an ultraclean and highly absorbent wiper with critically low levels of particulate and extractable counts.…

Valutek’s ESD polyester wiper is constructed from 100% continuous-filament polyester in a double-knit, no-run, interlock pattern with a conductive fiber designed to dissipate electrical charge. This substrate exhibits moderate absorbency and low levels of particulate and extractable counts.…

Valutek’s pressure-heat sealed polyester wiper is constructed from 100% continuous filament polyester in a double-knit, no-run, interlock pattern with pressure-heat sealed edges. This wiper is an ultraclean and highly absorbent wiper with ultra low levels of particulate and extractable…

Valutek’s disposable SPP shoe cover is manufactured with 100% non-linting, non-woven, spunbond polypropylene fabric with stitched seams. The shoe covers are lightweight, strong, and durable.. All Valutek shoe covers are tested and manufactured in ISO compliant facilities under individual…

Valutek’s 12” PVC powder-free ambidextrous cleanroom glove is constructed from polyvinyl chloride plastic with beaded cuff and has a light bisque texture. This glove is electrostatic dissipative with a low level of particulate and extractable counts, offering the highest protection to…

Valutek’s nylon glove liner is manufactured with lightweight non-linting, fine-gauge knitted, 100% continuous filament virgin nylon. The glove has an ambidextrous shape in one universal size. This glove liner fits comfortably under latex, PVC, or nitrile gloves. The seamless design limits…

Valutek’s 23lb letter size cleanroom paper is specially formulated with cellulose fiber, surrounded and bonded by a polymer impregnated substrate. This special formulation minimizes particulate and ink smearing and provides the paper with high tear and tensile strength, ultra low levels of…

Valutek’s disposable SPP bouffant cap is manufactured with 100% non-linting, non-woven spunbond polypropylene fabric, which provides breathability while maintaining snug full coverage for the operators. The bouffant cap has a filament covered unexposed elastic edge design for secure fit and…

Valutek’s polyester floor mop head is manufactured with 100% white filament polyester in strands to absorb and encapsulate liquids for maximum sorptive capacity. The knitted fabric has extremely low particle and fiber generation which ensures excellent cleaning results. Laundered and packaged…