Valutek’s 12” ambidextrous disposable latex powder-free glove is constructed from 100% natural rubber latex with fully textured design and beaded long cuff. This glove provides high-level dexterity, is strong, reliable, durable, and comfortable hand protection for operators. Packaged in…

Valutek’s spunbond polypropylene disposable lab coats are manufactured with strong, lightweight, breathable, 100% non-linting, non-woven, spunbond polypropylene fabric. The lab coats are knee length with 5 snap closures, elastic cuffs, and a single ply shirt collar design. These lab coats do…

Valutek’s disposable anti-skid SPP shoe cover is manufactured with 100% non-linting, non-woven spunbond polypropylene fabric with stitched seams and sprayed latex anti-skid treads on the bottom for safety. The shoe covers are lightweight, strong, and durable. All Valutek shoe covers are…

Valutek adhesive mats has a specially developed adhesive coating designed to provide an effective means of reducing contamination by trapping and preventing the transfer of particles. Application: Valutek provides mats that are suitable for Macrotek, Microtek and Nanotek applications. The…

Valutek’s disposable microporous lab coats are manufactured with 100% non-linting microporous film bonded with a non-woven fabric that provides superior barrier protection against non-toxic particulates, liquids, spray and dust. The lab coats are highly breathable and provide great operator…

Valutek’s pre-wetted spunlace non-woven wiper is composed of a hydro entangled, nonwoven blend of 55% cellulose and 45% polyester pre-wetted with a blend of isopropyl alcohol and DI water. The pre-wetted format enhances the wipers absorbent capacity, effectiveness, and reduces airbone…

Valutek’s 30lb cleanroom paper is specially formulated with cellulose fiber surrounded and bonded by a polymer impregnated substrate. The special formulation minimizes particulate and ink smearing. This also provides the paper with high tear and tensile strength but with ultra low levels of…

Valutek’s disposable SPP beard cover is manufactured with 100% non-linting, non-woven, spunbond polypropylene fabric, which provides comfortable operator protection. The beard cover has a filament covered, unexposed elastic band for secure fit and closure. All Valutek beard covers are tested…

Valutek’s light-weight polyester wiper is constructed from light-weight, 100% continuous filament polyester in a double-knit, no-run, interlock pattern with cold knife cut edges. This wiper is a clean and moderately absorbent wiper with low levels of particulate and extractable counts.…

Valutek’s polyester floor mop head is manufactured with 100% white filament polyester in strands to absorb and encapsulate liquids for maximum sorptive capacity. The knitted fabric has extremely low particle and fiber generation which ensures excellent cleaning results. Laundered and packaged…

Valutek’s disposable 3-ply polypropylene face mask is constructed from non woven pleated, 7” x 3½” rectangular, glass-free polypropylene material with a malleable flat aluminum noseband. Available in both floss-covered round elastic ear-loops and head band design. All…

Valutek’s college ruled spiral-bound notebooks are manufactured with high-density polypropylene covers, with plastic spirals, and durable cleanroom papers. The covers have an impregnated antistatic property with excellent chemical resistance. The pages are printed with IPA resistant low…

Valutek’s pre-wetted polyester wiper is composed of 100% continuous-filament polyester fabric pre-wetted with a blend of isopropyl alcohol and DI water. The pre-wetted format enhances the wiper’s absorbent capacity, effectiveness, and reduces airborne contamination from traditional…

Valutek’s disposable anti-skid SPP ESD shoe cover is manufactured with 100% non-linting, non-woven spunbond polypropylene fabric. This shoe cover has stitched seams, sprayed latex anti-skid treads on the bottom for safety, and a 19.6” long conductive ribbon stitched on a solid seam to…

Valutek’s 9” ambidextrous disposable latex powder-free glove is constructed from 100% natural rubber latex with fully textured design and beaded cuff. This glove provides high-level dexterity, is strong, reliable, durable and comfortable hand protection for operators. Packaged in a…

Valutek nitrile powder-free ambidextrous 12” glove is constructed from 100% clean synthetic nitrile polymer and contains no rubber latex, fillers or silicones. This glove comes with beaded cuff and a textured fingertip design. Our specially formulated, high modulus nitrile provides unmatched…

Valutek’s 12” ambidextrous sterile nitrile cleanroom glove is constructed from 100% synthetic nitrile polymer. This glove contains no natural rubber latex, is silicone free and has a textured fingertip design with beaded long cuff. This glove is packaged in a cleanroom compatible…

Valutek’s 12” PVC powder-free ambidextrous cleanroom glove is constructed from polyvinyl chloride plastic with beaded cuff and has a light bisque texture. This glove is electrostatic dissipative with a low level of particulate and extractable counts, offering the highest protection to…

Valutek’s polyethylene film adhesive roller is manufactured with polyethylene and acrylic solvent based adhesive sheets. The perforated sheets allow for removal after use, providing a new surface area for the next application. A bactericide is used to prevent microbial growth. All Valutek…

Valutek’s laser sealed polyester wiper is constructed from 100% continuous filament polyester in a double-knit, no-run, interlock pattern with a laser sealed edge. This wiper is an ultraclean and highly absorbent wiper with critically low levels of particulate and extractable counts.…

Valutek’s ESD polyester wiper is constructed from 100% continuous-filament polyester in a double-knit, no-run, interlock pattern with a conductive fiber designed to dissipate electrical charge. This substrate exhibits moderate absorbency and low levels of particulate and extractable counts.…

Valutek’s ultrasonic sealed polyester wiper is constructed from 100% continuous filament polyester in a double-knit, no-run, interlock pattern with ultrasonic sealed edge. This wiper is an ultraclean and highly absorbent wiper with extremely low levels of particulate and extractable counts.…

Valutek’s disposable SPP bouffant cap is manufactured with 100% non-linting, non-woven spunbond polypropylene fabric, which provides breathability while maintaining snug full coverage for the operators. The bouffant cap has a filament covered unexposed elastic edge design for secure fit and…

Valutek’s nylon glove liner is manufactured with lightweight non-linting, fine-gauge knitted, 100% continuous filament virgin nylon. The glove has an ambidextrous shape in one universal size. This glove liner fits comfortably under latex, PVC, or nitrile gloves. The seamless design limits…

Valutek’s disposable microporous coveralls are manufactured with 100% non-linting microporous film bonded with a non-woven fabric to provide superior barrier protection against non-toxic particulates, liquids, spray and dust. All coveralls have a flap over zipper closure, elastic wrist, and…

Valutek’s disposable SPP shoe cover is manufactured with 100% non-linting, non-woven, spunbond polypropylene fabric with stitched seams. The shoe covers are lightweight, strong, and durable.. All Valutek shoe covers are tested and manufactured in ISO compliant facilities under individual…

Valutek nitrile powder free ambidextrous 9.5” glove is constructed from 100% clean synthetic nitrile polymer, contains no rubber latex, fillers, or silicones and has a beaded cuff and textured fingertip design. Our specially formulated, high modulus nitrile provides unmatched operator comfort…

Valutek’s disposable coated polypropylene sleeves are constructed from lightweight, strong, durable polyethylene-coated spunpond polypropylene fabric with a non-latex elastic cuffs design. The polyethylene coating offers great liquid protection. All Valutek sleeves are tested and manufactured…

Multi-Task ‘Arizona Blue’ nitrile gloves are constructed from 100% clean, synthetic nitrile polymer and contains no rubber latex, fillers, or silicones. This glove comes with beaded cuff and a textured fingertip design. This glove offers the protection of nitrile with the sensitivity of…

Valutek’s disposable cross-linked polyethylene shoe covers are manufactured with 100% cross-linked polyethylene with heat-sealed seams. These shoe covers are strong, durable, and impervious to liquids. Available in lightweight, standard weight, and heavy weight. All Valutek shoe covers are…

Valutek’s disposable 3-ply polypropylene face mask is constructed from non woven pleated, 7” x 3½” rectangular, glass-free polypropylene material with a malleable flat aluminum noseband. Available in both floss-covered round elastic ear-loops and head band design. All…

Valutek’s PE-coated polypropylene non-skid shoe cover is manufactured with a polyethylene coated outer layer and a non-linting, non-woven spunbond polypropylene inner layer with stitched seams and elastic ankle cuffs. The shoe cover has a durable skid-resistant embossed PVC sole design and…