Valutek’s 30lb cleanroom paper is specially formulated with cellulose fiber surrounded and bonded by a polymer impregnated substrate. The special formulation minimizes particulate and ink smearing. This also provides the paper with high tear and tensile strength but with ultra low levels of…

Valutek’s 12” ambidextrous nitrile powder-free cleanroom glove is constructed from 100% clean, synthetic nitrile polymer and contains no rubber latex. This glove has a textured fingertip and a beaded long cuff design which offeres the ultimate cleanliness and operator dexterity with…

Valutek’s twill-patterned cotton wiper is constructed from 100% tightly woven long stable cotton. The fabric of this wiper is bias-cut and has a cross section of 120 x 60 threads per square inch. This wiper is clean and durable with high heat resistance. All Valutek wipers are tested and…

Valutek’s polyethylene film adhesive roller is manufactured with polyethylene and acrylic solvent based adhesive sheets. The perforated sheets allow for removal after use, providing a new surface area for the next application. A bactericide is used to prevent microbial growth. All Valutek…

Valutek’s 23lb letter size cleanroom paper is specially formulated with cellulose fiber, surrounded and bonded by a polymer impregnated substrate. This special formulation minimizes particulate and ink smearing and provides the paper with high tear and tensile strength, ultra low levels of…

Valutek’s PE-coated polypropylene non-skid shoe cover is manufactured with a polyethylene coated outer layer and a non-linting, non-woven spunbond polypropylene inner layer with stitched seams and elastic ankle cuffs. The shoe cover has a durable skid-resistant embossed PVC sole design and…

Valutek’s disposable SPP beard cover is manufactured with 100% non-linting, non-woven, spunbond polypropylene fabric, which provides comfortable operator protection. The beard cover has a filament covered, unexposed elastic band for secure fit and closure. All Valutek beard covers are tested…

Valutek’s spunlace non-woven wiper is constructed from a hydro entangled, nonwoven blend of 55% cellulose and 45% polyester. This composite substrate combines the highly absorbent properties of a natural fiber with the cleanliness and strength of a synthetic yarn, which has a low level of…

Valutek’s disposable latex powder-free black finger cots are constructed from 100% natural rubber latex, rolled with a smooth finish, and have a beaded edge. The finger cots offer a consistent conductive level and are primarily used where static charge is a major concern. Packaged in a…

Valutek’s pre-wetted spunlace non-woven wiper is composed of a hydro entangled, nonwoven blend of 55% cellulose and 45% polyester pre-wetted with a blend of isopropyl alcohol and DI water. The pre-wetted format enhances the wipers absorbent capacity, effectiveness, and reduces airbone…

Valutek’s ultrasonic sealed polyester wiper is constructed from 100% continuous filament polyester in a double-knit, no-run, interlock pattern with ultrasonic sealed edge. This wiper is an ultraclean and highly absorbent wiper with extremely low levels of particulate and extractable counts.…

Valutek’s disposable 3-ply polypropylene face mask is constructed from non woven pleated, 7” x 3½” rectangular, glass-free polypropylene material with a malleable flat aluminum noseband. Available in both floss-covered round elastic ear-loops and head band design. All…

Valutek’s pre-wetted pressure-heat sealed polyester wiper is composed of 100% continuous-filament polyester fabric pre-wetted with a blend of isopropyl alcohol and DI water. The pre-wetted format enhances the wipers absorbent capacity, effectiveness, and reduces airborne contamination from…

Valutek’s disposable microporous hood is manufactured with 100% non-linting microporous film bonded with a non-woven fabric. This provides superior barrier protection against non-toxic particulates, liquids, spray and dust while the hood has high breathability to ensure operator comfort. All…

Valutek’s pre-wetted polyester wiper is composed of 100% continuous-filament polyester fabric pre-wetted with a blend of isopropyl alcohol and DI water. The pre-wetted format enhances the wiper’s absorbent capacity, effectiveness, and reduces airborne contamination from traditional…

Valutek’s disposable microporous coveralls are manufactured with 100% non-linting microporous film bonded with a non-woven fabric to provide superior barrier protection against non-toxic particulates, liquids, spray and dust. All coveralls have a flap over zipper closure, elastic wrist, and…

Valutek’s disposable SPP shoe cover is manufactured with 100% non-linting, non-woven, spunbond polypropylene fabric with stitched seams. The shoe covers are lightweight, strong, and durable.. All Valutek shoe covers are tested and manufactured in ISO compliant facilities under individual…

Valutek’s disposable 3-ply polypropylene face mask is constructed from non woven pleated, 7” x 3½” rectangular, glass-free polypropylene material with a malleable flat aluminum noseband. Available in both floss-covered round elastic ear-loops and head band design. All…

Valutek’s polyester floor mop head is manufactured with 100% white filament polyester in strands to absorb and encapsulate liquids for maximum sorptive capacity. The knitted fabric has extremely low particle and fiber generation which ensures excellent cleaning results. Laundered and packaged…

Valutek’s light-weight polyester wiper is constructed from light-weight, 100% continuous filament polyester in a double-knit, no-run, interlock pattern with cold knife cut edges. This wiper is a clean and moderately absorbent wiper with low levels of particulate and extractable counts.…

Valutek’s cleanroom tubular polyester floor mop head is manufactured with 1/2” knitted tube, made of 100% white filament polyester in a spaghetti style looped to form edgeless tubular strands to absorb and encapsulate liquids for maximum sorptive capacity. The knitted fabric is…

Valutek’s disposable cross-linked polyethylene shoe covers are manufactured with 100% cross-linked polyethylene with heat-sealed seams. These shoe covers are strong, durable, and impervious to liquids. Available in lightweight, standard weight, and heavy weight. All Valutek shoe covers are…

Valutek nitrile powder-free ambidextrous 12” glove is constructed from 100% clean synthetic nitrile polymer and contains no rubber latex, fillers or silicones. This glove comes with beaded cuff and a textured fingertip design. Our specially formulated, high modulus nitrile provides unmatched…

Valutek’s nylon glove liner is manufactured with lightweight non-linting, fine-gauge knitted, 100% continuous filament virgin nylon. The glove has an ambidextrous shape in one universal size. This glove liner fits comfortably under latex, PVC, or nitrile gloves. The seamless design limits…

Valutek’s nylon knit wiper is constructed from 100% continuous filament nylon in a double-knit, no-run, interlock pattern. This clean and absorbent wiper offers excellent softness and superior strength. Laundered and packaged in a cleanroom, all Valutek wipers are tested and manufactured in…

Valutek’s light-weight polyester wiper is constructed from light-weight, 100% continuous filament polyester in a double-knit, no-run, interlock pattern with cold knife cut edges. This wiper is a clean and moderately absorbent wiper with low levels of particulate and extractable counts.…

Valutek adhesive mats has a specially developed adhesive coating designed to provide an effective means of reducing contamination by trapping and preventing the transfer of particles. Application: Valutek provides mats that are suitable for Macrotek, Microtek and Nanotek applications. The…

Valutek’s pre-wetted laser sealed polyester wiper is composed of 100% continuous-filament polyester fabric pre-wetted with a blend of isopropyl alcohol and DI water. The pre-wetted format enhances the wipers absorbent capacity, effectiveness, and reduces airborne contamination from…

Valutek’s 12” ambidextrous disposable latex powder-free glove is constructed from 100% natural rubber latex with fully textured design and beaded long cuff. This glove provides high-level dexterity, is strong, reliable, durable, and comfortable hand protection for operators. Packaged in…

Valutek nitrile powder free ambidextrous 9.5” glove is constructed from 100% clean synthetic nitrile polymer, contains no rubber latex, fillers, or silicones and has a beaded cuff and textured fingertip design. Our specially formulated, high modulus nitrile provides unmatched operator comfort…

Valutek’s disposable coated polypropylene sleeves are constructed from lightweight, strong, durable polyethylene-coated spunpond polypropylene fabric with a non-latex elastic cuffs design. The polyethylene coating offers great liquid protection. All Valutek sleeves are tested and manufactured…

Multi-Task ‘Arizona Blue’ nitrile gloves are constructed from 100% clean, synthetic nitrile polymer and contains no rubber latex, fillers, or silicones. This glove comes with beaded cuff and a textured fingertip design. This glove offers the protection of nitrile with the sensitivity of…