Thermo Scientific Nalgene, Carboys
-
Polypropylene Spigot Closure
Thermo Scientific NalgeneNalge 6423 1-1/8-12 female screw thread closure fits all Nalgene carboys with spigot Use in place of spigot to provide leakproof seal when autoclaving liquids in a carboy, or when transporting or handling carboy to prevent accidental opening of the spigot.
-
Quick Connect Closures, Venting
Thermo Scientific NalgeneCaps with quick connect/shut off valves Nalge 2158 series Leakproof 83B caps Two port and three port configuration Excellent for vacuum trap type applications Quick filling venting closure system will fit on all Nalgene carboys and large bottles with 83B neck finish.…
-
Clearboys Polycarbonate Carboys
Thermo Scientific NalgeneUsable at subfreezing temperatures and in cold rooms Nalge 2251 series Glass-like clarity, with size 83B polypropylene screw cap Autoclavable and leakproof Recommended only for use with water and non-hazardous aqueous solutions; also usable with dilute acids and some alcohols; not usable with…
-
Sterile InVitro™ Biotainer® Carboys
Thermo Scientific NalgeneLight blue polycarbonate Silicone lined polypropylene closure Sterile, ready-to-use and provide safe storage from -100°C to 100°C Leak proof with molded-in graduations in mL Space-saving square shape Meet USP 87, 88 and are tested for pyrogenicity
-
Rectangular Polypropylene Carboys With Spigots
Thermo Scientific NalgeneNalge 2321 series Rectangular carboy for storing and dispensing media, sterile water, etc. Autoclavable Similar to 1753F10 series, but of polypropylene, with stainless steel carrying strap Leakproof Autoclave only when empty. Before autoclaving, set cap or closure on top of the container…
-
Fluorinated High-Density Polyethylene Carboys
Thermo Scientific NalgeneUseful with most acids, alkalies and aggressive organic solvents Fluorination enhances long-term container performance and prevents permeation loss Split and puncture resistant; Tefzel spigot and fluorinated polypropylene screw closure Stainless steel carrying strap
-
Heavy-Duty Wide Mouth Jugs
Thermo Scientific NalgeneIdeal for storing solids or powders Nalge 2241 High-density, translucent polyethylene 6 gallon capacity Molded-in handle and recessed bottom allow easier filling and emptying without spills Rugged, heavy-duty design with wide stance and low center of gravity assures stability Closure is 120…
-
Polyethylene Jugs With Spout
Thermo Scientific NalgeneLow-density polyethylene, safety dispensing Nalge 2340 series Central wide neck, 2 1/2” i.d., has size 83B polypropylene screw cap Easy handling with handle at top and bottom and offset pouring spout with captive plug Leakproof 10 L jugs are 15 1/4” high, 9 3/4” o.d.; 20 L…
-
Top Works Flexible Systems
Thermo Scientific NalgeneFor NALGENE Carboys and Bottles Polypropylene closures, platinum-cured silicone inserts Flexible silicone Top Works Systems include solid, 2-port and 3-port versions. Platinum-cured silicone tubing is fused through stopper to form one-piece closure system. Permits aseptic liquid transfer…
-
Carboy Vent Filter, 0.2 Micron
Thermo Scientific NalgeneCompact filter for venting and solvent filtration applications Useful for maintaining purified water stored in carboys Features a Teflon PTFE membrane Hydrophobic membrane permits sterile venting on a slow exhaust/liquid autoclave cycle of carboys up to 50L Can be used up to…
-
Screw Closure PP 100 mm
Thermo Scientific NalgeneGuarantee leakproof services with secure-fitting Thermo Scientific™ Nalgene™ Replacement Screw Closures for Nalgene Carboys. Made to fit Nalgene Carboys † The term “leakproof” applies to Thermo Scientific Nalgene products that meet the following…
-
Replacement Spigots for Nalgene 2318 Series
Thermo Scientific Nalgene1753C67 is a standard spigot for carboys (Nalge 6422) 1753D30 spigot is needle type for tanks (Nalge 6421) Both are polypropylene with thread size 1 1/8” - 12 female screw thread Includes removable tubing adapter for smaller tubing; fits sizes (1/4” or 5/16” i.d.) 5/8”…
-
3-Ported Closure
Thermo Scientific NalgenePP-lined Radiation stabilized Fits 48 mm QA neck Radiation stabilized 48 mm QA PP closure features three ports and a removable silicone liner. Closure fits all Biotainer products with a 48 mm QA neck. Closure can be used for filling or venting operations. Ports have tabulations on…
-
Polyethylene Jugs
Thermo Scientific NalgeneSuitable for corrosive liquids Nalge 2220 series Low-density polyethylene jugs have polypropylene screw caps Neck is offset for easy and accurate pouring Large, molded handle accommodates gloved hand Leakproof Closure size for 1732M10 jug is 38-430 mm; dimensions are 11 3/4” high,…
-
Single-Use HDPE Carboys
Thermo Scientific NalgeneEliminate cleaning, prep and set-up costs with ready-to-use Thermo Scientific™ Nalgene™ Single-Use HDPE Carboys. Supplied sterile for one-time use, the high-density polyethelyne vessels are ideal for storing sterile fluids and pharmaceutical/biotech products. Features …
-
HDPE Lowboys With Spigots
Thermo Scientific NalgeneHigh-density polyethylene Nalge 2323 series Low-profile design fits easily into tight spaces, on shelves or in refrigerators Leakproof and stackable Patented Convenient integral handgrip for safe, easy transport Ideal for storing and dispensing reagents, titrants, distilled water Tolerates…
-
Polycarbonate Rectangular Carboys With Spigots
Thermo Scientific NalgeneNalge 2322 With polypropylene spigot and screw closure High-impact strength Leakproof Autoclavable Window-clear Sturdy handgrips Space-saving rectangular shape. All sizes feature molded-in graduations. Good for cold room use. Autoclave only when empty. Before autoclaving, set cap or…
-
Polypropylene Carboys With Spigots
Thermo Scientific NalgeneNalge 2319 series Autoclavable and leakproof Similar to 1753C10 series, but made entirely of polypropylene, including spigot and size 83B cap with TPE gasket. Before autoclaving, set closure on carboy without engaging threads. Dismount and disassemble spigot before autoclaving. Autoclave only…
-
Filling/Venting Closure
Thermo Scientific NalgeneFor aseptic liquid transfer to Nalge containers Nalge 2162 83 mm polypropylene cap with fittings Two 1/2” filling ports and one vent port Autoclavable Two barbed filling ports for 1/2-inch-i.d. tubing and one 3/8-inch-o.d. vent port used with syringe/air filters.…
-
Nalgene Polypropylene Carboys
Thermo Scientific NalgeneExcellent for autoclaving batches of culture media, distilled water and solutions Nalge 2250 series Graduated to contain in 1-gallon and 5-liter increments Two molded handles and size 83B polypropylene screw cap; also accepts No. 13 1/2 rubber stopper in place of cap Not recommended for use…
-
Polyethylene Carboy with Handles
Thermo Scientific NalgeneFor storing corrosive chemicals and standard solutions Nalge 2210 series Low-density polyethylene bottles have two molded handles and size 83B polypropylene screw cap Leakproof Graduated to contain in 1-gallon and 5-liter increments Dimensions: 20 liter carboy: 20 1/2” high, 11…
-
Sanitary Carboys
Thermo Scientific NalgeneIdeal for any application where sanitary fluid handling is required Clear polycarbonate Autoclavable at 121°C Lot traceable/lot controlled Polycarbonate carboys are clear, tough and can be used from -100 to +121°C. Lighter and safer than glass, these carboys can hold 20…
-
Filling / Venting Closure With 1/4 Inch Fittings PP 83B
Thermo Scientific NalgeneThermo Scientific™ Nalgene Filling/Venting Closures are aseptic handling solutions for pharmaceutical, biotechnology and laboratory liquid transfer applications. For use with Nalgene bottles and carboys with 83B closures, including pre-mounted lengths of platinum-cured silicone tubing…
-
Polypropylene Lowboys With Spigots
Thermo Scientific NalgeneNalge 2324 Excellent chemical resistance Low profile design fits easily in tight spaces, on shelves or in refrigerators Leakproof Can be autoclaved repeatedly Polypropylene spigot and screw closure, size 63 mm; tubing same as 1753L30 series Dimensions: 8 liter Lowboys…
-
Carboy Heavy Duty PP w / Handles 10L
Thermo Scientific NalgeneThermo Scientific™ Nalgene Heavy Duty Vacuum Carboys are useful as a vacuum trap, and will hold full vacuum up to 8 hours. Constructed of thick walled natural polypropylene PP) provides added strength. Supplied with white 83B PP closure with TPE (thermoplastic elastomer) gasket. …
-
Clearboys Polycarbonate, Without Spigot
Thermo Scientific NalgeneNalge 2213 series Usable in cold rooms and at sub-freezing temperatures Similar to1734Q20 series, but of polycarbonate, with stainless steel carrying handle Graduated Due to the limited chemical resistance of polycarbonate, autoclavable bottles are recommended only for use with…
-
Barbed Bulkhead Fittings
Thermo Scientific NalgeneFor retrofitting closures for liquid transfer (non-vented) Nalge 6149 1/4 or 1/2 inch tubing choice Each fitting kit includes 2 polypropylene fittings, acetal nuts, silicone gaskets and TPE port caps. Autoclavable. Cap not included.
-
High-Density Polyethylene Rectangular Carboys
Thermo Scientific NalgeneNalge 2211 series Space-saving design High-density polyethylene with stainless steel bail handle Molded-in graduations in liters and gallons Polypropylene screw cap, size 100 Leakproof Neck i.d. 3 1/2 inches 20 liter size has molded-in hand-grips Dimensions: 9-liter carboys measure 216 x…
-
Polypropylene Carboys with 1.5" Sanitary Flanges
Thermo Scientific NalgeneUse the Thermo Scientific™ Nalgene™ Autoclavable Polypropylene Carboys with 1.5" Sanitary Flanges as dispensing ports or with secure hookup for supply reservoirs to systems such as fermentors or chromatography columns. Features: Molded-in handles for ease in…
-
Polypropylene Wide Mouth Rectangular Carboys
Thermo Scientific NalgeneNalge 2212 With polypropylene screw closure 3 1/2” neck opening Sturdy handle is attached to molded-in shoulder loops Leakproof Autoclavable Ideal for storing solutions, media, and sterile water. Useful for handling large volumes of powders and other solid samples. Calibrated in liters…
-
Pour Spout PP 38-430
Thermo Scientific NalgenePolypropylene with polyethylene insert For all bottles with 38-430 (38-mm) neck finish
-
Quick Connect Closures, Hose Barb Fittings
Thermo Scientific NalgeneHose barb fitting to quick connect adapters Nalge 2159 series Provides multiple connection to the quick filling closure ports Ultimate in versatility and adaptability in creating vacuum trap type systems. Available in straight or elbow design to fit 1/4” or 3/8” tubing…