Thermo Scientific Nalgene, Carboys
-
Nalgene Polypropylene Carboys
Thermo Scientific NalgeneExcellent for autoclaving batches of culture media, distilled water and solutions Nalge 2250 series Graduated to contain in 1-gallon and 5-liter increments Two molded handles and size 83B polypropylene screw cap; also accepts No. 13 1/2 rubber stopper in place of cap Not recommended for use…
-
LDPE Wide Mouth Carboys
Thermo Scientific NalgeneNalge 2234 series Lower-density bottles have molded handles and polypropylene screw cap Size 100 Walls are rigid and opaque Leakproof Neck i.d. 3 1/2 inches Graduated to contain in 1-gallon and 5-liter increments Dimensions: 10 liter carboys measure 13 3/4” high x 9 7/8” o.d.;…
-
Sanitary Carboys
Thermo Scientific NalgeneIdeal for any application where sanitary fluid handling is required Clear polycarbonate Autoclavable at 121°C Lot traceable/lot controlled Polycarbonate carboys are clear, tough and can be used from -100 to +121°C. Lighter and safer than glass, these carboys can hold 20…
-
Clearboys Polycarbonate, Without Spigot
Thermo Scientific NalgeneNalge 2213 series Usable in cold rooms and at sub-freezing temperatures Similar to1734Q20 series, but of polycarbonate, with stainless steel carrying handle Graduated Due to the limited chemical resistance of polycarbonate, autoclavable bottles are recommended only for use with…
-
Polycarbonate Rectangular Carboys With Spigots
Thermo Scientific NalgeneNalge 2322 With polypropylene spigot and screw closure High-impact strength Leakproof Autoclavable Window-clear Sturdy handgrips Space-saving rectangular shape. All sizes feature molded-in graduations. Good for cold room use. Autoclave only when empty. Before autoclaving, set cap or…
-
Quick Connect Closures, Venting
Thermo Scientific NalgeneCaps with quick connect/shut off valves Nalge 2158 series Leakproof 83B caps Two port and three port configuration Excellent for vacuum trap type applications Quick filling venting closure system will fit on all Nalgene carboys and large bottles with 83B neck finish.…
-
Fluorinated Polyethylene Jerricans
Thermo Scientific NalgeneDurable and specifically designed for hard use Nalge 2242 HDPE Improved permeation barrier Lower extractables Useful with acids, alkalies and aggressive organic solvents Economical Similar to Nalge 2240 except fluorocarbon surfaces provide improved barrier…
-
HDPE Lowboys With Spigots
Thermo Scientific NalgeneHigh-density polyethylene Nalge 2323 series Low-profile design fits easily into tight spaces, on shelves or in refrigerators Leakproof and stackable Patented Convenient integral handgrip for safe, easy transport Ideal for storing and dispensing reagents, titrants, distilled water Tolerates…
-
Polypropylene Carboys with 1.5" Sanitary Flanges
Thermo Scientific NalgeneUse the Thermo Scientific™ Nalgene™ Autoclavable Polypropylene Carboys with 1.5" Sanitary Flanges as dispensing ports or with secure hookup for supply reservoirs to systems such as fermentors or chromatography columns. Features: Molded-in handles for ease in…
-
Rectangular Polypropylene Carboys With Spigots
Thermo Scientific NalgeneNalge 2321 series Rectangular carboy for storing and dispensing media, sterile water, etc. Autoclavable Similar to 1753F10 series, but of polypropylene, with stainless steel carrying strap Leakproof Autoclave only when empty. Before autoclaving, set cap or closure on top of the container…
-
Carboy Heavy Duty PP w / Handles 20L
Thermo Scientific NalgeneThermo Scientific™ Nalgene Heavy Duty Vacuum Carboys are useful as a vacuum trap, and will hold full vacuum up to 8 hours. Constructed of thick walled natural polypropylene PP) provides added strength. Supplied with white 83B PP closure with TPE (thermoplastic elastomer) gasket. …
-
Polypropylene Lowboys With Spigots
Thermo Scientific NalgeneNalge 2324 Excellent chemical resistance Low profile design fits easily in tight spaces, on shelves or in refrigerators Leakproof Can be autoclaved repeatedly Polypropylene spigot and screw closure, size 63 mm; tubing same as 1753L30 series Dimensions: 8 liter Lowboys…
-
Low-Density polyethylene carboys
Thermo Scientific NalgeneNalge 2318 series Supplied with cap and Thomas number 1753C67 spigot Leakproof Sizes 10 L and larger have two molded handles and take Cap No. 83B; 4 L size takes Cap No. 38-430 Graduated to deliver in 1-gallon and 5-liter increments. 4 L is not graduated.
-
Polyethylene Carboy with Handles
Thermo Scientific NalgeneFor storing corrosive chemicals and standard solutions Nalge 2210 series Low-density polyethylene bottles have two molded handles and size 83B polypropylene screw cap Leakproof Graduated to contain in 1-gallon and 5-liter increments Dimensions: 20 liter carboy: 20 1/2” high, 11…
-
Fluorinated Carboys and Bottles
Thermo Scientific NalgeneUseful with most acids, alkalies and aggressive organic solvents Nalge 2097 series HDPE with polypropylene screw closure Heavy duty walls Leakproof Safe, durable, cost-efficient, high-density polyethylene narrow mouth bottles are suitable for shipping Fluorocarbon surface, a Teflon ® -like…
-
Polypropylene Sanitary Carboys with 3" Sanitary Neck Design
Thermo Scientific NalgenePerform aseptic fluid transfer or sampling in biopharmaceutical applications with Thermo Scientific™ Nalgene™ Polypropylene Sanitary Carboys with 3" Sanitary Neck Design. The carboy's welded sanitary neck is easy to clean with no screw threads. Versatile with…
-
Barbed Bulkhead Fittings
Thermo Scientific NalgeneFor retrofitting closures for liquid transfer (non-vented) Nalge 6149 1/4 or 1/2 inch tubing choice Each fitting kit includes 2 polypropylene fittings, acetal nuts, silicone gaskets and TPE port caps. Autoclavable. Cap not included.
-
Polyethylene Jugs
Thermo Scientific NalgeneSuitable for corrosive liquids Nalge 2220 series Low-density polyethylene jugs have polypropylene screw caps Neck is offset for easy and accurate pouring Large, molded handle accommodates gloved hand Leakproof Closure size for 1732M10 jug is 38-430 mm; dimensions are 11 3/4” high,…
-
Filling / Venting Closure With 1/4 Inch Fittings PP 83B
Thermo Scientific NalgeneThermo Scientific™ Nalgene Filling/Venting Closures are aseptic handling solutions for pharmaceutical, biotechnology and laboratory liquid transfer applications. For use with Nalgene bottles and carboys with 83B closures, including pre-mounted lengths of platinum-cured silicone tubing…
-
Carboy Vent Filter, 0.2 Micron
Thermo Scientific NalgeneCompact filter for venting and solvent filtration applications Useful for maintaining purified water stored in carboys Features a Teflon PTFE membrane Hydrophobic membrane permits sterile venting on a slow exhaust/liquid autoclave cycle of carboys up to 50L Can be used up to…
-
Polypropylene Carboys With Spigots
Thermo Scientific NalgeneNalge 2319 series Autoclavable and leakproof Similar to 1753C10 series, but made entirely of polypropylene, including spigot and size 83B cap with TPE gasket. Before autoclaving, set closure on carboy without engaging threads. Dismount and disassemble spigot before autoclaving. Autoclave only…
-
Sterile InVitro™ Biotainer® Carboys
Thermo Scientific NalgeneLight blue polycarbonate Silicone lined polypropylene closure Sterile, ready-to-use and provide safe storage from -100°C to 100°C Leak proof with molded-in graduations in mL Space-saving square shape Meet USP 87, 88 and are tested for pyrogenicity
-
Wide Mouth Polypropylene Carboys with Handles
Thermo Scientific NalgeneStore and transport solids, powders and liquids using Thermo Scientific™ Nalgene™ Wide Mouth Polypropylene Carboys with Handles. These durable natural polypropylene (PP) carboys feature a convenient wide-mouth opening to promote ease of cleaning and dispensing. The wide-shoulder…
-
High-Density Polyethylene Rectangular Carboys
Thermo Scientific NalgeneNalge 2211 series Space-saving design High-density polyethylene with stainless steel bail handle Molded-in graduations in liters and gallons Polypropylene screw cap, size 100 Leakproof Neck i.d. 3 1/2 inches 20 liter size has molded-in hand-grips Dimensions: 9-liter carboys measure 216 x…
-
Fluorinated High-Density Polyethylene Carboys
Thermo Scientific NalgeneUseful with most acids, alkalies and aggressive organic solvents Fluorination enhances long-term container performance and prevents permeation loss Split and puncture resistant; Tefzel spigot and fluorinated polypropylene screw closure Stainless steel carrying strap
-
Polyethylene Jugs With Spout
Thermo Scientific NalgeneLow-density polyethylene, safety dispensing Nalge 2340 series Central wide neck, 2 1/2” i.d., has size 83B polypropylene screw cap Easy handling with handle at top and bottom and offset pouring spout with captive plug Leakproof 10 L jugs are 15 1/4” high, 9 3/4” o.d.; 20 L…
-
Polypropylene Carboys with Bottom Tubulation
Thermo Scientific NalgeneEnsure more complete drainage with the low outlet of Thermo Scientific™ Nalgene™ Autoclavable Polypropylene Carboys with Bottom Tubulation, excellent for distilled water and culture media. Features: Bottom tubulation molded in one piece with bottle Molded-in handles…
-
Filling/Venting Closure
Thermo Scientific NalgeneFor aseptic liquid transfer to Nalge containers Nalge 2162 83 mm polypropylene cap with fittings Two 1/2” filling ports and one vent port Autoclavable Two barbed filling ports for 1/2-inch-i.d. tubing and one 3/8-inch-o.d. vent port used with syringe/air filters.…
-
Clearboys Polycarbonate Carboys
Thermo Scientific NalgeneNalge 2317 series Autoclavable and leakproof Screw cap size 83B; neck i.d. 70 mm Ideal for dispensing sterile water and non-hazardous aqueous solutions. Practical for use in cold rooms, even at subfreezing temperatures. Polypropylene spigot is sealed by two Teflon® O-rings. Delivery spout takes…
-
Polyethylene Jerricans
Thermo Scientific NalgeneLightweight and chemically resistant Nalge 2240 series HDPE For storing, carrying, and dispensing liquids, handle and pouring spouts are integrally molded onto stable, rectangular container Spout sealed by captive leakproof polypropylene screw cap, size 53B Molded…
-
Top Works Flexible Systems
Thermo Scientific NalgeneFor NALGENE Carboys and Bottles Polypropylene closures, platinum-cured silicone inserts Flexible silicone Top Works Systems include solid, 2-port and 3-port versions. Platinum-cured silicone tubing is fused through stopper to form one-piece closure system. Permits aseptic liquid transfer…
-
Amber HDPE Carboys
Thermo Scientific NalgeneAmber high-density polyethylene Amber polypropylene closure Convenient wide shoulder handles. Meets the U.S. Pharmacopoeia Light Transmission Test (USP latest edition) requirements for storage of light-sensitive materials. Excellent for storing and mixing photosensitive chemicals,…