Techne (Cole-Parmer)
-
Aluminium Dri-Block® Inserts
Techne (Cole-Parmer)Manufactured from anodised aluminium, Techne has the widest choice of interchangeable block inserts of any manufacturer. This allows Techne Dri-Block® heaters to accommodate the widest variety of microtubes, test tubes, cups, plates, cuvettes and vials on the market, resulting in the most…
-
SBH130 Analogue 2 Block Heater
Techne (Cole-Parmer)Analogue control Economical price 130°C maximum temperature Hot warning light to warn that the blocks are too hot to touch Uniform and stable temperatures Robust construction with simple analogue setting of temperature. The 'Hot' warning light will flash whenever the block…
-
Portable Stirrers
Techne (Cole-Parmer)Battery powered or mains supply Tough, compact and light weight Variable speed up to 1300rpm Powered by long life batteries or mains power this rugged little unit can be used almost anywhere. Ideal for use inside incubators, glove boxes or in the field. Housed in a tough, chemically…
-
EXTRACT APP/STIR 6W 500ML 110V
Techne (Cole-Parmer)The EMEA60500/CEX1 Stirring Multi (Extraction) Mantle with six recesses has a built-in electronic temperature controller and stirring control. It may be used with the FM110 Flow Monitor to cntrol water flow through the glass condenser. The vented case's unique air flow ensures the case remains…
-
Shaking Incubator
Techne (Cole-Parmer)Combined incubator shaker Digital display for temperature and speed Integrated timer Unique retractable platform for easy loading and unloading Angle adjustable accessory tube racks, with patent pending Magnalock coupling system available Coms enabled for external temperature…
-
Lab Scale Rockers, SSL3 and SSL4
Techne (Cole-Parmer)These compact rockers are ideal where gentle mixing is required, either on the bench or in incubators. Choice of two models: Model SSM3 provides a 3D gyratory motion, ideal for low foaming agitation, DNA extractions, staining and de-staining procedures etc. The angle of tilt can be moved to…
-
Shaking Water Bath, SBS40
Techne (Cole-Parmer)Choice of linear or orbital shaking action Digital display and selection of temperature Low level water sensor Integral drain Range of accessories A water bath with integral shaking, a choice of platform is available to provide linear or orbital shaking action. The platforms…
-
Digital 2 Block Heater
Techne (Cole-Parmer)Choice of 130°C or 200°C maximum temperature Digital setting and display Uniform and stable temperatures Designed for the precise heating of test-tubes, micro centrifuge tubes and cuvettes and microtitre plates. The bright, easy to read LED display facilitates very easy setting of…
-
-
PRIMEPRO48 Real Time qPCR Thermal Cycler
Techne (Cole-Parmer)The Prime Pro 48 real time PCR system is a new, high specification, economically priced real time thermal cycler from Techne. Made in the UK, the Prime Pro 48 features the highest thermal block uniformity and fastest run time of any block-based qPCR system on the market. High thermal…
-
Multi-Position Hot Plate Stirrer
Techne (Cole-Parmer)Three independently controlled stirring/heating positions Separate "Hot" warning lights for each plate Powerful magnets for strong magnetic coupling A space saving and economical unit with 3 independent heating/stirring positions in a footprint only 600 x 270mm. Easily accommodates 3…
-
Digital Water Baths
Techne (Cole-Parmer)Choice of sizes: 6, 15 or 24 Litres Digital display and selection of temperature Low level water sensor Integral drain Supplied with robust polycarbonate lid Three robust and reliable water baths, each with easy to clean stainless steel tank and sturdy metal outer casing. …
-
Digital Block 3 Heater
Techne (Cole-Parmer)Choice of 130°C or 200°C maximum temperature Three block capacity Digital setting and display Uniform and stable temperatures Designed for the precise heating of test-tubes, micro centrifuge tubes and cuvettes and microtitre plates. The bright, easy to read LED…
-
Microtitre Plate Incubator
Techne (Cole-Parmer)Compact unit Ideal for microtitre plates and Petri dishes Laminar flow air circulation Digital setting and display of temperature Convenient upward opening door Stainless steel interior Specially designed for use with microtitre plates, which can be difficult to incubate.…
-
Large Shaking Incubator
Techne (Cole-Parmer)Combined incubator shaker 115 Litre capacity available Digital display for temperature and speed Integrated timer Unique retractable platform for easy loading and unloading Angle adjustable accessory tube racks, with Magnetic coupling system available Communications enabled for…
-
Analogue Dri-Block® Heaters
Techne (Cole-Parmer)Techne® Dri-Block® heaters have been providing a safe, dry, constant temperature source in the laboratory for 50 years, offering market-leading choice, flexibility and specification. Dri-Block® heaters are a source of precision temperature control for general, routing applications and…
-
Sample Concentrator
Techne (Cole-Parmer)Fits Dri-Block® Heaters Range: 25° to 200°C (dependent upon heater) Fully adjustable gas reservoir to suit the levels of liquid in sample tubes Gas chamber can be removed and dri block used for routine incubation and temperature control As sample is heated, gas…
-
Distinction Water Stills
Techne (Cole-Parmer)All glass construction Two independent safety thermostats Safety reservoir full shut off Wall mountable Silica sheathed heaters All glass construction with silica sheathed heaters ensures top purity distillate at an economical price. Fitted with a control device to turn off the…
-
Temperature Circulators
Techne (Cole-Parmer)Clip On Units Exceptional thermal performance Adjustable over-temperature cut-out Standard circulating pump with external circulating connections Temperature circulators for attachment to 9833H25 unheated baths. Refrigeration or cooling coil is required for below ambient cooling. Please…
-
Mini Rockers, SSM3 and SSM4
Techne (Cole-Parmer)These compact rockers are ideal where gentle mixing is required, either on the bench or in incubators. Choice of two models: Model SSM3 provides a 3D gyratory motion, ideal for low foaming agitation, DNA extractions, staining and de-staining procedures etc. The angle of tilt can be moved to…
-
Oakton® Tube Rotator Falcon Tube Holder Disc
Techne (Cole-Parmer)The Techne (Cole-Parmer) disc holds up to 12 centrifuge tube holders measuring from 12 mm x 25 mm to 12 mm x 35 mm. It is suitable for use in research facilities and general laboratories. This tube holder disc features sturdy construction which ensures durability.
-
Dri-Blocks
Techne (Cole-Parmer)Removable, aluminum alloy insert blocks accept test tubes and microcentrifuge tubes. Can be used with 5891L02 through L12 heaters or 4367B25 sample concentrator. Block dimensions (W x D x H, mm): 95 x 76 x 51.
-
Unheated Baths
Techne (Cole-Parmer)For attachment with 9833H01 series Five models to choose from Stoved enamel steel outer cases Designed to be used with a clip-on Tempette or Tempunit temperature circulator Baths incorporate attractive carrying handles for added safety Thomas numbers 9833H25 through H37…
-
SB Rotator Holders for SB2 & SB3
Techne (Cole-Parmer)Choice of six different tube holders to hold a variety of tubes. All tube holders can be quickly and easily removed and replaced without the need for tools. Once tube holder is in place tubes can be easily slotted into the holder where they will be securely held. Holders SB3/1, SB3/2 and SB3/3…
-
Fixed Speed Rotator
Techne (Cole-Parmer)Fully adjustable mixing angle Choice of tube holders to hold a number of different sized tubes Spillage tray SB2 comes with fixed 20rpm speed SB3 comes with adjustable speed between 2 and 40rpm The SB rotators give gentle but effective mixing, ideal for keeping biological…
-
Holder Microtube 10-11.5mm
Techne (Cole-Parmer)For use with Stuart® Rotator SB2 (1227Y94 ) & SB3 (1227Y95 ) Tube holder can be quickly and easily removed and replaced without the need for tools. Once tube holder is in place tubes can be easily slotted into the holder where they will be securely held. Quick and easy…
-
EXTRACTION APP/STIR 6WAY 500ML
Techne (Cole-Parmer)The EMEA60500/CE Stirring Multi (Extraction) Mantle with six recesses has a built-in electronic temperature controller and stirring control. It may be used with the FM110 Flow Monitor to cntrol water flow through the glass condenser. The vented case's unique air flow ensures the case remains…
-
Tissue Culture Flasks
Techne (Cole-Parmer)Designed for stirring suspension cell cultures containing microcarriers Borosilicate glass Graduated Entire flask assembly can be autoclaved Suitable for conventional suspension cell cultures Produce improved cell yields over culture flasks which have suspended bar magnet.…
-
Hybridization Oven/Incubator Accessories
Techne (Cole-Parmer)Hybridization Tubes with Sealing End Caps (7187D22 and D23) Of borosilicate glass, eliminating the need for a silanizing agent 7187D22 usable length 195 mm x 80 mm external diameter (73 mm internal diameter); 7187D23 usable length 195 mm x 44 mm external diameter (37 mm internal…
-
Holder Test/Blood Tube 9-20mm
Techne (Cole-Parmer)Tube holders can be quickly and easily removed and replaced without the need for tools Once tube holder is in place tubes can be easily slotted into the holder where they will be securely held Tube diameter: 9 to 20mm Number of tubes: 20
-
Dri-Block Dry Heat Baths
Techne (Cole-Parmer)For precise temperature control; ±0.1°C Provide a safe, dry, constant temperature source in the laboratory for the purpose of incubation, boiling, inactivation, wet ashing, enzyme analysis, and a variety of clinical and industrial applications. NOTE: aluminum insert blocks are not included.
-
Biological Magnetic Stirrers
Techne (Cole-Parmer)For suspension, cell culture and microcarriers All solid state controls Steel housing with attractive, durable texture Strong, rugged and lightweight SOFTSTART™ design ensures controlled acceleration of the stirrer rod to the selected speed, thus avoiding excessive…