Simport, Supplies
-
Made of polypropylene Caps are available either with or without a silicone washer between the cap and the tube to ensure a positive leakproof seal at all temperatures. Closures and tubes are both manufactured of polypropylene, providing the same coefficient of expansion. The cap features a…
-
When quality matters choose the AMPLITUBE™ Made of polypropylene This more convenient 0.2 ml tube strip incorporates individually attached caps. No need to carry two separate components in inventory. The strip includes 8 integral 0.2 ml tubes with ultrathin sidewalls and bottoms…
-
Double CytoSep™ Cytology Funnels
SimportThe Simport Double CytoSep™ Cytology Funnel with disposable sample chamber allows for two samples to be run simultaneously on a single slide and is ideal for immunohistochemistry work. The Double CytoSep™ Cytology Funnel provides a cell deposition area of 6 mm (28 mm squared) for sample…
-
Antistatic Pour Boat
SimportSimport® Weighing Dishes will resist diluted acids, aqueous solutions, alcohols and bases. They are ideal for many applications such as weighing and dispensing. They are safe, contaminant-free, biologically inert economical containers for weighing liquid or powdered samples in the laboratory.…
-
Microlock Centrifuge Tubes
SimportGraduated, 1.5 mL total capacity Seals securely with one hand Pierceable lid Graduated, rugged tubes are designed to withstand the stress of high speed centrifugation up to 17,000 rpm. The Microlock ® closure has a latch feature that eliminates sample loss and hazardous…
-
Made of specially formulated polypropylene Designed for the storage of biological material, human or animal cells, at temperatures as low as -196°C (but should be used only in the gas phase of liquid nitrogen). The cap features a long skirt for easy one-handed aseptic technique, a super…
-
Simport® is proud to offer a multi-compartment container in the shape of a dish and half prefilled with 10% Neutral Buffered Formalin, for holding and transporting biopsies. It is supplied with a leakproof closure with o-ring ensuring total protection of contents. Made of polystyrene. The…
-
Made of acetal polymer The SLIMSETTE™ Tissue Cassettes Have four (4) square compartments, are compact, easier to use and more efficient than ever. Similar to the design of the M509 model, but is specially designed to hold biopsy specimens during the embedding process, as well as in a…
-
Made of polypropylene Thin-walled 48-well PCR plates (6 x 8) designed for rapid thermal transfer Each well has a capacity of 0.2 ml Smooth and inert surface on which enzymes and nucleic acids do not bind Flexible design allowing them to be cut into sections Alphanumeric grid to help…
-
Simport® is proud to offer a multi-compartment container in the shape of a dish and half prefilled with 10% Neutral Buffered Formalin, for holding and transporting biopsies. It is supplied with a leakproof closure with o-ring ensuring total protection of contents. Made of polystyrene. The…
-
UniMailer™ Slide Mailer
SimportA brand new approach to microscope slide handling and mailing Made of high-impact polystyrene, each UniMailer holds one slide (25 x 75 mm/ 1” x 3” with or without a cover glass), safely and securely. Stackable for mailing and/or storing multiple slides, they are secured by an…
-
Made of polypropylene / Closure made of polyethylene Ten different colors are available. For applications needing the utmost security where sample integrity is of high importance. A great feature of the Spectainer™ I is that it incorporates a unique tamper evident screw cap ensuring peace of…
-
For medium-sized sample volumes. The 16mm tube is compatible with 15 ml centrifuge rotors. Polypropylene. RNase, DNase, Pyrogen and DNA free. Centrifugation up to 25,000 g. Autoclavable. Temp range +121 °C to -196 °C.
-
Leakproof, 1¼ turn cap Wide mouth - 24mm opening Lower background than glass These standard size vials fit all major counters. The linerless polythylene cap goes on the polypropylene vial easily, yet seals completely. Less than 50% the background of glass. Suitable for low…
-
Made of acetal This version of the Micromesh™ offers 1676 square openings (0.38 mm) allowing for a greatly improved fluid exchange without having to use biopsy pads. Large anterior and posterior slots in both cassette and cover ensure that the MicromeshTM biopsy cassette will sink…
-
Simport® is proud to offer a multi-compartment container in the shape of a dish and half prefilled with 10% Neutral Buffered Formalin, for holding and transporting biopsies. It is supplied with a leakproof closure with o-ring ensuring total protection of contents. Made of polystyrene. The…
-
These are so easy to use, and improve turn-around time while giving more diagnostic information. Being totally disposable, they eliminate time-consuming decontamination and cleaning. They are safe to use and reduce the risk of exposure to pathogenic samples. They also decrease the possibility of…
-
Microscope SlideTray™
SimportSlideTray™ microscope slide holder made of HIPS lasting many years even under the most adverse conditions. The SlideTray™ will hold up to 20 microscope slides in an almost horizontal position. Each slide can be easily removed and placed back in its position. The SlideTray™ is…
-
Single CytoSep™ Cytology Funnels
SimportFully compatible with the Shandon CytoSpin® Centrifuge, Simport CytoSep™ Cytology Funnels can be used to deposit a thin layer of cells in a clearly defined area of a microscope slide. The filter card absorbs any excess fluid. These Cytology Funnels have the filter cards pre-attached for…
-
Contact Plate
SimportMade of polystyrene These dishes are free from optical distortion and are sterile. The grid is 10 x 10 mm with numbered and lettered squares to facilitate counting and to locate colonies. The D210-17D model is designed with a convex bottom to save on culture medium.
-
No longer throw away half-empty plates after switching to SuperFlex™ low profile "break-away" PCR plates. Low profile SuperFlex™ “Break-Away” 96 well clear PCR plate is the most flexible, efficient, and cost-effective option. Eliminate the use of…
-
Made of polypropylene Having all the advantages of our popular T341T Series, the specially formulated polypropylene used to manufacture these tubes provides a low adhesion surface to obtain maximum sample yield. Ideal for research procedures such as nucleic acid amplifications, protein work…
-
Combi-Box™ Storage Box
SimportMade of PVC The Simport® Combi-Box™ can be used not only as a storage rack but also as a workstation. The white base will accept all 96- and 384-well plates and an easy to remove transparent cover allows easy viewing of contents. Being only 40 mm high, the stackable…
-
96 Clear Caps, Non-Sterile
SimportThese SuperFlex™ “Break-Away” caps were created to be used with the SuperFlex™ low profile "break-away" PCR plates. The caps can be separated into 8 strips or higher saving time and money, just like the SuperFlex™ plates! Eliminate the use of scissors…
-
The Simport Eco-Friendly SpecTainer™, one of the most innovative specimen containers on the market today, is now available in a new version: The Eco-Friendly SpecTainer™, a rapidly degradable Specimen Container. Plastics take hundreds of years to degrade naturally in the environment.…
-
Cover made of polystyrene Base made of high impact polystyrene Cover has numbered squares for easy sample identification Two corners of cover and base are cut to prevent misalignment Vials readily visible through transparent cover Vial picker included with every box Air vents…
-
Made of polyethylene Plug type push-in caps and 2-position snap caps are made of polyethylene for test tubes with outside diameters of 12 or 17 mm. Dual position caps offer two possibilities: the closed but unsealed position where samples are maintained aerobic for microbiological…
-
Standard 96 well format These tubes use all the space in the 8 x 12 format, facilitating multi-step dilutions and preps, without transferring samples from larger tubes. Compatible with multi-channel harvesters, pipettes, Biomek, and many rotors. Tubes are translucent polypropylene.
-
Made of polypropylene Rotor-Gene™ analyzer was formerly designed by Corbett. These RotoCycler™ strips are perfectly designed to perform on Rotor-Gene™ instruments. Tube strips are packaged separately from cap strips. The frosted extensions on caps not only make them more…
-
This transparent sealing tape consists of a 2.0 mil polyolefin film coated on one side with a pressure sensitive acrylate adhesive which does not interfere with cycle reactions. It is ideal for reducing well-to-well contamination and/or spill over in sensitive PCR applications where the…
-
Made of polypropylene Caps are available either with or without a silicone washer between the cap and the tube to ensure a positive leakproof seal at all temperatures. As for tubes, these closures are also made of polypropylene, providing the same coefficient of expansion for both, which…