ChillBlock™ thermo-conductive metal alloy tube racks eliminate inconsistencies which occur due to inserting tubes directly into ice, dry ice, alcohol ba ths, water baths and other common laboratory temperature sources. Place the ChillBlock™ tube rack directly onto a temperature source…

ChillBlock™ thermo-conductive metal alloy tube racks eliminate inconsistencies which occur due to inserting tubes directly into ice, dry ice, alcohol ba ths, water baths and other common laboratory temperature sources. Place the ChillBlock™ tube rack directly onto a temperature source and it will…

Color coded inserts fit precisely into the cap of the Cryovial® for color identification.

Tubes made of either polystyrene or polypropylene These centrifuge tubes are also useful for collecting and transporting biological specimens. Leakproof characteristics are ensured by a flat top plastic screw cap with an inner sealing lip. Tubes are made of translucent polypropylene or…

Certified RNase-, DNase-, Pyrogen- and DNA-free Designed for storing biological material, human or animal cells, at temperatures as low as -196°C (but should be used only in the gas phase of liquid nitrogen). The cap features a long skirt for easy one hand aseptic methods, the same…

Made of specially formulated polypropylene Designed for storing biological material, human or animal cells, at temperatures as low as -196 °C (but should be used only in the gas phase of liquid nitrogen). The cap features a long skirt for one hand aseptic methods, and a super fast thread…

2ml Internal Thread, Freestanding Cryovial, Sterile Silicone Seal 100/Bag, Certified DNase, RNase, Pyrogen and DNA Free.

CryoSette™ Frozen Tissue Storage Containers The Simport CryoSette™ is designed for frozen tissue collection, transport and storage. It can also be used for storing a multitude of other specimens in all laboratories. The robust design of the cryosette ensures that tissue morphology…

Fully compatible with the Shandon CytoSpin® Centrifuge, Simport CytoSep™ Cytology Funnels can be used to deposit a thin layer of cells in a clearly defined area of a microscope slide. The filter card absorbs any excess fluid. These Cytology Funnels have the filter cards pre-attached for…

Especially designed for collection, transport and storage of specimens, Simport® offers shatter resistant polypropylene containers, eliminating most problems of leakage and evaporation. Containers are uniquely stackable, shatter resistant and are manufactured from virgin, polypropylene. The…

Made of Polypropylene T347AQX screw cap incorporates a pierceable septum made of chemically resistant PTFE on the outside and silicone on the inside, both components being stable over a broad range of temperatures. The septum also acts as a silicone o-ring for better sample protection. It is…

When quality matters choose the AMPLITUBE™ Made of polypropylene This more convenient 0.2 ml tube strip incorporates individually attached caps. No need to carry two separate components in inventory. The strip includes 8 integral 0.2 ml tubes with ultrathin sidewalls and bottoms…

Made of polystyrene Simport Petri dishes are available in a variety of shapes and sizes for use in routine procedures and with automated equipment. Economical, optically clear dishes are precision-molded from biomedical grade polystyrene so cultures are clearly visible without distortion.…

Made of acetal polymer Disposable plastic cassettes hold tissue specimens during the embedding process, as well as in a storage file. Molded from a special high density polymer, these cassettes keep specimens safely submerged in liquid and are totally resistant to the chemical action of…

Biopsy pads are no longer necessary with these innovative disposable plastic biopsy cassettes with a large compartment measuring 25 x 30 mm. Perfect with needle biopsies. Mesh holes have a diameter of only 0.26 mm while still allowing for maximum fluid exchange and drainage. Molded from a special…

Screw cap for 5.0 ml MacrewTube™ Microcentrifuge tubes. Polypropylene. RNase, DNase, Pyrogen and DNA free. Autoclavable. Temp range +121 °C to -196 °C.

Made of acetal Molded from a special high density polymer, these cassettes keep specimens safely submerged in liquid and are totally resistant to the chemical action of histological solvents. The efficient flow-through slots maximize fluid exchange and ensure proper drainage. The one-piece…

Made of either polystyrene or polypropylene Both are tapered at a 60° angle with inside fluting.

Made of polypropylene Versatile and easy to use Two sided Holds up to 25 tubes of 10 to 12 mm Accomodates 16 PCR or 0.2 to 0.5 ml tubes Supplied with handles This smaller model of the UniRackTM can hold up to 25 polystyrene or polyprolylene 10 and 12 mm tubes, such as 10 x…

Made of polystyrene and polypropylene Suitable for general centrifugation, urinalysis procedures and serum separation. These conical bottom tubes are chemically clean and metal free, ready to use and uniform in size and shape, measuring 17 x 120 mm. Graduations are at 0.25, 0.5, 1.0, 2.5,…

The unique snap valve pour spout is easily popped open and offers dripless pouring Specially designed leakproof screw cap with liner for safer transport Large centrally located handle for good balance and ease of manipulation Metal free and resistant to hydrochloric acid In regular…

Made of acetal polymer The EasyDip™ Slide Staining Rack will hold up to 12 microscope slides with dimensions such as 75 x 25 mm, (3 x 1 in.) and even 76 x 26 mm and with a thickness of 1.0 and 1.2 mm. The slides fit into individual slots for free passage and rapid drainage of staining fluids.…

Certified RNase-, DNase-, Pyrogen- and DNA-free Designed for storing biological material, human or animal cells, at temperatures as low as -196°C (but should be used only in the gas phase of liquid nitrogen). A silicone washer between cap and vial ensures a positive leakproof seal at all…

Made of ABS Plastic Another user friendly approach to immunohistochemistry staining. This tray is also suitable not only for routine staining requiring a humid chamber but is also ideal for Hematology, Cytology and Microbiology laboratories. Manipulation is made safe and easy by using only…

Made of polypropylene Rotor-Gene™ analyzer was formerly designed by Corbett. These RotoCycler™ strips are perfectly designed to perform on Rotor-Gene™ instruments. Tube strips are packaged separately from cap strips. The frosted extensions on caps not only make them more…

Made of acetal Suitable for hoppers accepting plastic sleeves, these tissue cassettes will load in cassette labeling instruments in one simple operation. Just load the 75-cassette QuickLoad™ sleeve in the hopper and you are ready for printing. Molded from a special high density…

Container made of high-density polyethylene Cap made of polypropylene This more conventional style urine bottle is available in 2 sizes: 2.5 L and 3.5 L. However, it incorporates some of the great features of the URISAFE 24 Hr Urine Collection Container. The unique snap valve pour…

Extra clarity for better visual inspection Boil-proof design Ultra rugged walls made for high speed centrifugation Unique ClickLok™ sealing mechanism Made of highest purity polypropylene Made of polypropylene These 0.6 ml and 1.5 ml graduated rugged tubes are made of laboratory…

4ml Internal Thread, Freestanding Cryovials, Sterile Silicone Seal, Certified RNASE/DNASE and Pyrogen Free, Dimensions: 70 x 12.5mm. 100/Bag,

Made of PVC The Simport® Combi-Box™ can be used not only as a storage rack but also as a workstation. The white base will accept all 96- and 384-well plates and an easy to remove transparent cover allows easy viewing of contents. Being only 40 mm high, the stackable…

17 mm outside diameter Plug type push-in caps are made of polyethylene for test tubes with outside diameters of 17 mm. Dual position caps can be closed but not sealed so that samples are maintained aerobic for microbiological procedures, or caps can be pushed tight and fully sealed for…

Made of polycarbonate COLOR YOUR WORLD with this 100-place MICREWTUBE® Storage Box for tubes ranging from 0.5 ml to 2 ml (except 1.5 ml conical bottom tubes). Made of extra strong polycarbonate, this durable storage box is designed to be used at temperatures between -196°C and…