SP Wilmad-LabGlass, Flasks, Supplies
-
ProCulture® Fernbach Shaker Flasks with GL45 Screw Thread
SP Wilmad-LabGlassIdeal for cultures that require a large surface area to volume ratio With three standard baffle indents to improve agitation during shaking Supplied with GL45 closure Durable white ceramic marking spot Manufactured from ASTM Type I, Class A borosilicate
-
Round Bottom Four-Neck Flasks
SP Wilmad-LabGlassAvailable in various sizes, these borosilicate glass round bottom flasks have four vertical necks - one center neck and three side necks which are 90° apart. All necks have Standard Taper outer joints.
-
Bidwell-Sterling Moisture Traps with Vapor Connection
SP Wilmad-LabGlassFor the determination of water in petroleum and bituminous materials, these borosilicate glass Bidwell-Sterling moisture traps collect liquefied vapor. They feature a connection between top of vapor tube and graduated tube. This construction allows excess solvent to return to flask with minimal…
-
Flask internal baffles and vortex impeller design provides gentle stirring while insuring top-to-bottom mixing Impeller extends above the media surface to increase aeration Bottom flask bump prevents material from accumulating at the center of the bottom surface Large sidearm threads…
-
ProCulture® Magnetically Driven Cap Assembly Only
SP Wilmad-LabGlass70, 100 and 120 mm caps are manufactured from glass filled PBT 70, 100 and 120 mm caps supplied with red rubber liner and Ultem impeller retaining nut Shur-Lok® 140 mm cap design has an unique compression O-ring design to insure tight internal seal of the flask and is supplied with Ultem…
-
ProCulture® Shaker Flasks with Delong Neck
SP Wilmad-LabGlassLong neck reduces splashing that could reach the closure Neck accommodates polypropylene and stainless steel closures Durable white ceramic marking spot Manufactured from ASTM Type I, Class A borosilicate
-
4 Neck Flat Flange Reaction Vessel Cover
SP Wilmad-LabGlassFeaturing a center neck and three side necks with full length outer Standard Taper joints, this borosilicate glass 4-neck reaction vessel lid/cover has a flat flange. Use LG-7316 clamps. NOTE: LG-8087 is designed to be used with LG-8080, LG-8084, LG-8085, and LG-8089 cylindrical reaction vessels.
-
Class A Volumetric Serialized Flasks with Stopper
SP Wilmad-LabGlassGlass quality, calibration lines, inscription and appearance are maintained according to the former NBS circular 602. Flask has a marking spot in addition to a serial number. Calibrated to contain (TC) at 20°C. Supplied with stopper.
-
Jacketed Cylindrical Reaction Vessels with Flat Flange
SP Wilmad-LabGlassThese jacketed, cylindrical borosilicate glass reaction vessels are without constriction at the top and have a flat bottom. They feature sturdy walls and a tooled flat flange with a surface ground to assure a tight seal. There is a gently sloping contour at junction of side wall and bottom, thus…
-
Cylindrical Reaction Vessels with O-Ring Flange
SP Wilmad-LabGlassThese borosilicate glass cylindrical reaction vessels have a tooled flat flange with an O-ring groove for a greaseless seal. Suitable for vacuum operation. Wall thickness is uniform throughout flask. Note: Use LG-7316 clamps.
-
Filter Flask with Stopper Joint
SP Wilmad-LabGlassThis borosilicate glass heavy wall filtering flask can be used with FILTERWARE® Filtration Apparatus (LG-1755). Supplied with a silicone stopper with 9/16" hole and a #2 hose connection, the 4000mL flask has 1/2" connections.
-
Round Bottom Two Vertical Neck Flasks
SP Wilmad-LabGlassWith two vertical necks and a round bottom, these borosilicate glass flasks feature a side neck Standard Taper 24/40 outer joint. The center Standard Taper joint varies with flask capacity.
-
Crank Case Oil Dilution Distilling Receivers
SP Wilmad-LabGlassThese borosilicate glass distilling receivers with inner and outer Standard Taper joints are used to determine the amount of dilution in crankcase oils when gasoline has been used as fuel. Receiver design keeps heat-sensitive materials away from the hot base of the flask. Calibrated "to…
-
ProCulture® Shaker Flasks with Delong Neck and Deep Baffles
SP Wilmad-LabGlassThree deep baffle indents to improves gas transfer during shaking Long neck reduces splashing that could reach the closure Neck accommodates polypropylene and stainless steel closures Durable white ceramic marking spot Manufactured from ASTM Type I, Class A borosilicate
-
4 Neck Molded Reaction Vessel Covers
SP Wilmad-LabGlassThese borosilicate glass 4-neck reaction vessel lids/covers have a contact surface that is finely ground to provide a tight seal. Featuring a flat flange, these pressed lids have a center neck and three side necks with outer Standard Taper joints. Use LG-7316 clamps. NOTE: LG-8081 for use with…
-
Cylindrical Reaction Vessels with Flat Flange
SP Wilmad-LabGlassThese borosilicate glass cylindrical reaction vessels are without constriction at the top and have a flat bottom. They feature sturdy walls and a tooled flat flange with a surface ground to assure a tight seal. There is a gently sloping contour at junction of side wall and bottom, thus preventing…
-
Class A Volumetric Flasks, Heavy Duty, Wide Mouth, Glass Stopper
SP Wilmad-LabGlassCalibrated "to contain" (TC) at 20°C, these Class A, borosilicate glass, wide mouth flasks are designed to provide pipette access along with facilitating filling and sampling. Unique flat bottom interior permits use of a standard stir bar. The heavy wall thickness gives greater…
-
Class A Volumetric Serialized Cylindrical Flasks with Stopper
SP Wilmad-LabGlassFeaturing a wide base for greater stability, these borosilicate glass flasks have a serial number and a marking area. Its design addresses the needs of smaller volume vessels. All sizes are made to meet the requirements of ASTM E 237. Calibrated "to contain" (TC) at 20°C and supplied…
-
Conical Flange Vessel Clamp
SP Wilmad-LabGlassThis clamp is designed for reaction vessels/kettles with a conical flange. The top clamp is easily removed without disturbing the cover or body of reaction flask. Disassemble by loosening nuts. Includes extension rod for clamping to a laboratory stand. NOTE: Use with LG-8010 to LG-8050 vessels…
-
Class A Volumetric Flasks, Heavy Duty, Wide Mouth, PTFE Stopper
SP Wilmad-LabGlassCalibrated "to contain" (TC) at 20°C, this Class A, borosilicate glass, wide mouth flask is designed to provide pipette access along with facilitating filling and sampling. Unique flat bottom interior permits use of a standard stir bar. The heavy wall thickness gives greater…
-
Monier-Williams Sulfites Distilling Apparatus
SP Wilmad-LabGlassUsed for the determination of sulfites in food and related product, this Monier-Williams Sulfites distilling apparatus is made of borosilicate glass and has Standard Taper 24/40 outer and inner joints. The complete unit consists of a special outlet adapter with a double bend, a 300mm long Allihn…
-
3 Neck Reaction Vessel/Kettle Cover
SP Wilmad-LabGlassFeaturing a center neck and two side necks with full length outer Standard Taper joints that are 180° apart, these borosilicate glass reaction vessel lids have a conical flange. The bottom part of lid is finely ground for a leak-proof fit with flask. LG-8030 is used on cylindrical or…
-
3 Neck O-Ring Flange Reaction Vessel Cover for Size 359 O-Rings
SP Wilmad-LabGlassFeaturing a center neck and two side necks with full length outer Standard Taper joints, this borosilicate glass 3-neck reaction vessel lid/cover has an 6-5/8" flange O.D. and comes with a size 359 O-ring. Designed to be used with 2000mL, 3000mL, and 4000mL cylindrical reaction vessels…
-
Round Bottom Three Vertical Neck Flasks
SP Wilmad-LabGlassAvailable in various sizes, these borosilicate glass round bottom flasks have three vertical necks with Standard Taper outer joints. The side necks are 180° apart.
-
4 Neck Reaction Vessel Covers
SP Wilmad-LabGlassFeaturing a center neck and three side necks with full length outer Standard Taper joints that are 120° apart, these borosilicate glass reaction vessel lids have a conical flange. Bottom flange ID is 4" and ground for a leak-proof fit with a reaction flask. For use with reaction vessels…
-
4 Neck O-Ring Flange Reaction Vessel Covers for Size 359 O-Rings
SP Wilmad-LabGlassFeaturing a center neck and three side necks with full length outer Standard Taper joints, this borosilicate glass 4-neck reaction vessel lid/cover has a 6-5/8" flange O.D. and comes with a size 359 O-ring. Designed to be used with 2000mL, 3000mL, and 4000mL cylindrical reaction vessels…
-
Cylindrical Reaction Kettles
SP Wilmad-LabGlassCylindrically shaped, the upper end of these borosilicate glass reaction kettles are tooled to obtain a thickened portion and flat top.The finely ground tops create a leak-proof fit with covers LG-8030 to LG-8050, ML-1285 and ML-1286.
-
Class A Saybolt Viscosity Volumetric Flask
SP Wilmad-LabGlassCalibrated "to contain" (TC) at 20°C, this heavy walled borosilicate glass viscosity flask has a top with reinforced lip and is used in determining Saybolt viscosity of petroleum and bituminous materials. This receiving flask can be used in Saybolt viscometer baths. Conforms to ASTM D…
-
Class A Volumetric Heavy Duty/Wide Mouth Amber Flasks with Glass Stopper
SP Wilmad-LabGlassCalibrated "to contain" (TC) at 20°C and amberized for light sensitive studies, these Class A, borosilicate glass, wide mouth flasks are designed to provide pipette access along with facilitating filling and sampling. Unique flat bottom interior permits use of a standard stir bar. The…
-
Plain Dissolution Test Vessel
SP Wilmad-LabGlassMade of borosilicate glass, these dissolution test vessels/flasks have smooth hemispherical bottoms, straight sides, and flat flanges. Reference: USP 23 (711)
-
ProCulture® Magnetically Driven Vortex Impeller Only
SP Wilmad-LabGlassVortex impeller design provides gentle stirring while insuring top-to-bottom mixing Impeller extends above the media surface to increase aeration of media All components are autoclavable Impeller components are made from FDA approved materials
-
ProCulture® Fernbach Shaker Flasks with Delong Neck
SP Wilmad-LabGlassIdeal for cultures that require a large surface area to volume ratio Delong style neck to reduce splashing that could reach the closure Three baffle indents in the flask bottom center to improve agitation during shaking Durable white ceramic marking spot Manufactured from ASTM Type I,…